Sorry for the late reply, just got into my lab. When I start the USRP2, This is what happens: F lights up first, then all the LEDS flash and D and F stay on.
I tried burning txrx_raw_eth_20100608.bin/u2_rev3-20100603.bin as my fw/fpga on the SD card and even that does the same thing. I'am using the Kingston 2gb SD card I got with the USRP2. Praveen On Wed, Mar 30, 2011 at 10:07 PM, Josh Blum <j...@ettus.com> wrote: > > > On 03/30/2011 07:01 PM, Praveen Vikram wrote: > > Thank you josh. > > > > I did not look into the firewall issues. I will check the firewall status > > and post back. > > > > Ping does not work since the gigabit interface doesn't even detect a link > > (as reported by ethtool). > > > > Sorry, then its probably not a firewall issue. > > To help you confirm that the right images are burned to the sd card. Can > you see that the lights blink in the following pattern (after power cycle): > > 1) E > 2) E + C > 3) E + C + A > > then E, C, and A blink on and off twice > > then D and F remain on > > -josh >
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
