I have been using the E100 for about two weeks and have no problems. I
have built various GNU Radio Companion projects (text mode no wxgui) and
they run fine. Are you trying to be too ambitious with your transmitted
bandwidth?
The benchmark tests on mine indicate a maximum of 2.4Msps or thereabouts.
I have the following UHD version:
root@usrp-e1xx:~# uhd_find_devices
linux; GNU C++ version 4.5.2 20101204 (prerelease); Boost_104100;
UHD_0001.20101214211912.1
Cheers,
Ingmar
On 24/02/2011 3:25 PM, Almohanad Fayez wrote:
I was wondering about people's experience with the UHD driver on the
E100 or the Beagleboard. I am able to use it to receive IQ data from
the USRP but I can't seem to transmit anything from it ... if I take
the same flowgraph to a laptop I'm able to transmit IQ using the same
USRP/daughterboard and the UHD driver however when I try to run the
same transmitter on the Beagleboard and I check my spectrum analyzer I
don't see anything
I already did a signal capture before sending to the USRP and made
sure that there is data getting pushed through ... is there a problem
with UHD/USRP sinking on the E100 and the Beagleboard ??? I also made
sure that I'm using the latest UHD firmware on the beagleboard.
The following is the version info printed when I run the flowgraph:
linux; GNU C++ version 4.5.3 20110214 (prerelease); Boost_104500;
UHD_0001.20110224034946.1
thanks
al fayez
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
