Is this mac osx? What happens when you run examples/benchmark_rx --rate=10e6?
-josh On 02/18/2011 08:50 PM, Arya Santini wrote: > Hi, > > I have a N210, which when I try to use with GRC (UHD USRP single > source block) produces at the console: > > Current recv sock buff size: 50000000 bytes > mboard0 MIMO master > UHD source block got error code 0x1 > gr_block_executor: source <gr_block uhd single_usrp source (2)> > produced no output. We're marking it DONE. > This is the result of a timeout > Parameters I set for the block: > > self.uhd_single_usrp_source_0 = uhd.single_usrp_source( > device_addr="addr=192.168.10.2", > io_type=uhd.io_type.COMPLEX_FLOAT32, > num_channels=1, > ) > self.uhd_single_usrp_source_0.set_samp_rate(samp_rate) > self.uhd_single_usrp_source_0.set_center_freq(250e6, 0) > self.uhd_single_usrp_source_0.set_gain(0, 0) > > I left the Subdev Spec and Ch0: Antenna field blank. I'm using a WBX > RF board with TX/RX side antenna connected. I'm able to transmit using > the tx_waveforms example, and I know it is transmitting. > > Help, > Arya > > _______________________________________________ > Discuss-gnuradio mailing list > [email protected] > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio _______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
