Hi all,
Is there any high-level description of what processing is done in FPGA
in E100 and is there any optional blocks which can be removed? I see
that even aeMB is present in the project - is it used or it is not
compiled in?
I need to understand how much resource is left for custom DSP
processing in the FPGA. We're working on an (open-source) WiMAX
receiver and want to offload a lot of work to FPGA. But from design
summary (below) it looks like FPGA is pretty much crowded already.
Design Summary
--------------
Number of errors: 0
Number of warnings: 9773
Logic Utilization:
Number of Slice Flip Flops: 9,809 out of 33,280 29%
Number of 4 input LUTs: 12,582 out of 33,280 37%
Logic Distribution:
Number of occupied Slices: 8,618 out of 16,640 51%
Number of Slices containing only related logic: 8,618 out of 8,618 100%
Number of Slices containing unrelated logic: 0 out of 8,618 0%
*See NOTES below for an explanation of the effects of unrelated logic.
Total Number of 4 input LUTs: 13,252 out of 33,280 39%
Number used as logic: 11,239
Number used as a route-thru: 670
Number used as Shift registers: 1,343
The Slice Logic Distribution report is not meaningful if the design is
over-mapped for a non-slice resource or if Placement fails.
Number of bonded IOBs: 191 out of 309 61%
IOB Flip Flops: 106
IOB Master Pads: 1
IOB Slave Pads: 1
Number of ODDR2s used: 15
Number of DDR_ALIGNMENT = NONE 15
Number of DDR_ALIGNMENT = C0 0
Number of DDR_ALIGNMENT = C1 0
Number of BUFGMUXs: 1 out of 24 4%
Number of DCMs: 1 out of 8 12%
Number of DSP48As: 16 out of 84 19%
Number of RAMB16BWERs: 41 out of 84 48%
Average Fanout of Non-Clock Nets: 3.25
--
Regards,
Alexander Chemeris.
http://www.fairwaves.ru
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
