I first tried make distclean and the installation went fine, but when I
tried to start the GRC, following window showed up:
http://tinypic.com/r/dq671d/7 containing the error message "Cannot import
gnuradio. Are your PHYTONPATH and LD_LIBRARY_PATH set correctly?"
> I then tried git clean -dfx and rebuilding from scratch (for UHD and
> GNUradio).
> Installation for UHD (worked):
> git clone git://code.ettus.com/ettus/uhd.git
> cd uhd/host
> mkdir build
> cmake -DCMAKE_INSTALL_PREFIX=/opt/uhd ../
>
> make
> make test
> sudo make install
> PATH=$PATH:/opt/uhd/bin
>
> uhd_find_devices and uhd_usrp_probe works fine now, so i figured that the
> installation of UHD was successfull
>
> Installation for GNUradio (error at ./configure):
> git clone git://gnuradio.org/gnuradio.git
> git branch --track next origin/next
> git checkout next
> export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig:${PKG_CONFIG_PATH} #just to
> be sure ...
> BOOST_PREFIX=/opt/boost_1_37_0 #echo $BOOST_PREFIX returned nothing in the
> first place, so i figured it could help
> LD_LIBRARY_PATH=/home/fs/gnuradio-git/uhd/host/build/lib/:/opt/uhd/lib/:/opt/boost_1_37_0/lib
>
> #I also put both uhd paths in ld.so.conf and ran sudo ldconfig, but it
> didn't help
> ./bootstrap
> ./configure --with-boost=$BOOST_PREFIX --enable-gr-uhd
>
> Now following error showed up:
> checking for UHD... no
> gr-uhd requires libuhd 2.x.x
> configure: error: Component gr-uhd has errors; stopping.
>
> I did: find |grep libuhd and got:
> ./home/fs/gnuradio-git/uhd/host/build/lib/libuhd.so
> ./home/fs/gnuradio-git/uhd/host/build/lib/libuhd.so.002
> ./usr/local/lib/libuhd.so
> ./opt/uhd/lib/libuhd.so
> ./opt/uhd/lib/libuhd.so.002
>
> so I added /opt/uhd/lib/ and /home/fs/gnuradio-git/uhd/host/build/lib/ to
> ld.so.conf and ran sudo ldconfig (as said above). I then also tried to set
> LD_LIBRARY_PATH (see above again) but still the same error.
> I also tried to git clone from http://gnuradio.org/git/gnuradio.git(described
> in [1]) instead of git://
> gnuradio.org/gnuradio.git (described in [2])
>
> I don't know what to do next and would appreciate any help (again). I would
> be really happy if we could get this going.
>
> Fabian
>
> [1] http://gnuradio.org/redmine/wiki/1/UbuntuInstall
> [2] http://ettus-apps.sourcerepo.com/redmine/ettus/projects/uhd/wiki
>
>
>
>
>
> On Thu, Jan 20, 2011 at 5:13 PM, Josh Blum <j...@joshknows.com> wrote:
>
>>
>> > And the (probably) critical part causing the error:
>> > make[6]: *** Keine Regel vorhanden, um das Target »usrp_prims.cc«,
>> > benötigt von »_usrp_prims_la-usrp_prims.lo«, zu erstellen. Schluss.
>> > make[6]: *** No Rule given, for making Target »usrp_prims.cc«,
>> > needed by »_usrp_prims_la-usrp_prims.lo«. Ending.
>> >
>> >
>> > If you (or anyone else) got another hint on how to solve this i would be
>> > really glad.
>> >
>>
>> Sometimes autotools gets confused when there are many changes to the
>> build system. Try make distclean, and if not working: git clean -dfx
>> (wipes everything). and rebuild from scratch.
>>
>> -Josh
>>
>> _______________________________________________
>> Discuss-gnuradio mailing list
>> Discuss-gnuradio@gnu.org
>> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>
>
>
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
