On Tue, 2011-01-18 at 11:42 +0100, Eduardo Lloret Fuentes wrote: > Good morning, > > I am student (not a starving student) who started researching with GNU > Radio Software last month. This week, I am trying to implement an I/Q > Lab using the USRP2 board. > > What I mean is that I would like to create my own IP (for example a > filter) and to program it into the FPGA. Then, I would like to > generate pair of signals (I and Q), connect them to the FPGA and > receive the exit in an oscilloscope. This is the main idea. > > I read that I need the BasicRx/BasicTx or LFRX/LFTX daughterboards > depending on the frequency. Related to those daughterboards, I have > some questions I could not answer yet and I would appreciate if you > could help me: > 1. What is the purpose of the access to the 16 bits of high-speed > digital I/O?
Whatever you want them to be. RSSI, AGC, light up LEDs in interesting patterns. Whatever you want them to do, you're responsible for implementing. Some of them are used on some daughterboards (RFX, WBX, etc) for control. Generally speaking you don't need to worry about them. > 1. What is the purpose of the low-speed ADC's and DAC's? These are used for analog gain control and RSSI on some daughterboards (RFX, WBX, etc). On Basic/LF boards they aren't used for anything and you can use them for whatever purpose you like. Again, for most purposes users don't need to control these manually. > 1. What is the purpose of the SPI and I2C buses? It is possible > to manage some parameters of the FPGA design using the I2C > connected to a PC? Using the filter example, to change on the > fly, the value of the coefficients. Same as above. I2C is for access to the EEPROM configuration data on the daughterboard and for daughterboard control. SPI is used to control some of the chips on some daughterboards. If you want to hang stuff on the I2C and SPI buses and talk to them you definitely can (some hacking involved) but most people will not need to do this. > It would be great if you could tell me if there some manual or > datasheet about them. I found this: > * http://www.ettus.com/downloads/ettus_ds_USRP_TXRX_v5b.pdf > And also this schematic: > * http://code.ettus.com/redmine/ettus/projects/public/documents > but I am looking for the meaning of different pins and I am not so > good reading schematics. If you just want to hook up I/Q signals and view them on a PC, you should just be able to use a BasicRX (or LFRX for <1MHz) and use gnuradio-companion to view the signals on the PC. Implementing filters in the FPGA is significantly more advanced and will require significantly more work on your part, including (obviously) compiling the Verilog code yourself as well as having a good understanding of how the Verilog code is organized and implemented. You will also need ISE 12.1 for this. --n > > Thank you so much. > > Greetings > > Eduardo Lloret > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
