Hi, usrp2_card_burner_gui.py in share/uhd/utils worked fine for me on Ubuntu 10.04. Did you set the network interfaces addresses properly?
Cheers, Veljko On Tue, Nov 16, 2010 at 8:57 AM, Gregory, Adam <adam.greg...@roke.co.uk> wrote: > Hi all, > > > > I’m trying to get a MIMO setup working using USRP2s with the UHD drivers. I > have a PC with 2 gigabit Ethernet interfaces, and a USRP2 connected to each. > > > > My problem is that I can’t change the USRP2 IP address so that the two > devices have different addresses. I can set the IP address in the > motherboard EEPROM using usrp_burn_mb_eeprom, and I can see the updated IP > address reported when I run uhd_usrp_probe, but the IP address the USRP2 > answers to is still 192.168.10.2. > > > > Power-cycling the device has no effect, nor does trying another PC in case > of any address caching. I’ve tried with UHD firmware & fpga images built > myself from the latest git, and also with the 01/09/2010 release. > > > > I’ve seen on the mailing list archives that some people have had success > with MIMO and UHD, and I haven’t found any reference to IP address problems. > I must be missing something. Could anyone help please? > > > > Thanks in advance, > > Adam > > -- > > Roke Manor Research Ltd, Romsey, > Hampshire, SO51 0ZN, United Kingdom > > Part of the Chemring Group > > Registered in England & Wales at: > Chemring Group PLC, Chemring House, 1500 Parkway, > Whiteley, Fareham, Hampshire PO15 7AF, ENGLAND. > Registered No: 267550 > > ------------------------------------------------------------------------ > > Visit our website at www.roke.co.uk > > ------------------------------------------------------------------------ > > The information contained in this e-mail and any attachments is > proprietary to Roke Manor Research Ltd and must not be passed to any > third party without permission. This communication is for information > only and shall not create or change any contractual relationship. > > ------------------------------------------------------------------------ > > Please consider the environment before printing this email > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
