I did implement the pps input in the firmware so I can precisely start collecting data and the buffer problem solved. Thank you for your help -Burak
On Sat, Nov 6, 2010 at 12:51 PM, Burak TUYSUZ <buraktuy...@gmail.com> wrote: > Do you think that it will work or > should I use verilog for this purpose? > > Actually I did something in verilog but I guess when I stop collecting data > some > of the data waiting in the buffers, so that is why I wanted to learn if it > is easier to do in python. > Thank you > > > > On Sat, Nov 6, 2010 at 12:48 PM, Eric Blossom <e...@comsec.com> wrote: > >> On Sat, Nov 06, 2010 at 12:43:28PM -0400, Burak TUYSUZ wrote: >> > Thanks Eric, >> > >> > Is there a pps input application/example done with this on USRP1 >> > probably using a counter in python. >> >> Not that I know of. >> >> > I would like it to count the pulses coming from a source and according >> to >> > that >> > start collecting data. >> > >> > I would appreciate if you could explain this a little bit. >> > Thank you >> > >> > On Sat, Nov 6, 2010 at 12:32 PM, Eric Blossom <e...@comsec.com> wrote: >> > >> > > On Sat, Nov 06, 2010 at 11:11:51AM -0400, Burak TUYSUZ wrote: >> > > > Hi all, >> > > > I want to read an input from BasicRX pins using read_io() >> > > > I could not find a document how to do this in python. >> > > > An example would be great thank you in advance. >> > > >> > > pins = u.read_io(0) # 0 -> side A; 1 -> side B >> > > >> > > Eric >> > > >> > > > > -- > Burak TUYSUZ > Ph.D. Candidate, Research Assistant > The Pennsylvania State University > Electrical Engineering > 329 Electrical Engineering East Building > University Park, PA 16802 > > **********CONFIDENTIAL********** > This e-mail message and any included attachments are confidential, intended > only or the recipient named above, and may contain information that is > privileged and exempt from disclosure under applicable law. If you have > received this message in error, or are not the named recipient, please > immediately notify the sender by return e-mail and delete all copies of this > message. > > -- Burak TUYSUZ Ph.D. Candidate, Research Assistant The Pennsylvania State University Electrical Engineering 329 Electrical Engineering East Building University Park, PA 16802 **********CONFIDENTIAL********** This e-mail message and any included attachments are confidential, intended only or the recipient named above, and may contain information that is privileged and exempt from disclosure under applicable law. If you have received this message in error, or are not the named recipient, please immediately notify the sender by return e-mail and delete all copies of this message.
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
