Thanks. Yes, it looks like out of memory from dmesg. There are lots of error messages like --------------------------------------- [ 126.380096] attempt to access beyond end of device [ 126.386657] mmcblk0p2: rw=0, want=7782440, limit=7738167 [ 126.392578] attempt to access beyond end of device [ 126.397430] mmcblk0p2: rw=0, want=7777904, limit=7738167 --------------------------------------
When I reboot the board and make again, these info also appears -------------------------- /bin/bash ../../../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I../../.. -DOMNITHRE AD_POSIX=1 -I/usr/include -I/home/cic/Prj/gnuradio-3.2.2/gruel/src/include -I/home/cic/Prj/gnuradio- 3.2.2/gruel/src/include -Wall -Woverloaded-virtual -march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfl oat-abi=softfp -MT realtime.lo -MD -MP -MF .deps/realtime.Tpo -c -o realtime.lo realtime.cc libtool: compile: g++ -DHAVE_CONFIG_H -I. -I../../.. -DOMNITHREAD_POSIX=1 -I/usr/include -I/home/ci c/Prj/gnuradio-3.2.2/gruel/src/include -I/home/cic/Prj/gnuradio-3.2.2/gruel/src/include -Wall -Wover loaded-virtual -march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -MT realtime.lo -MD -MP -MF .deps/realtime.[ 126.364959] attempt to access beyond end of device Tpo -c realtime.cc -fPIC -DPIC [ 126.371978] mmcblk0p2: rw=0, want=7777904, limit=7738167 -o .libs/realtime.o [ 126.380096] attempt to access beyond end of device [ 126.386657] mmcblk0p2: rw=0, want=7782440, limit=7738167 [ 126.392578] attempt to access beyond end of device [ 126.397430] mmcblk0p2: rw=0, want=7777904, limit=7738167 g++: error trying to exec '/usr/libexec/gcc/arm-angstrom-linux-gnueabi/4.3.3/cc1plus': execv: Input/ output error make[4]: *** [realtime.lo] Error 1 ----------------------------------------- Is there any approaches to fix it? Thanks a lot! Zhen ________________________________ 发件人： Philip Balister <phi...@balister.org> 收件人： Zhen <zkon...@yahoo.com.cn> 发送日期： 2010/11/3 (周三) 5:44:09 下午 主 题： Re: [Discuss-gnuradio] build error when making gnuradio 3.2 on Angstrom/OE On 11/03/2010 05:04 PM, Zhen wrote: > Hi, All, > > Now I am trying to install GNU Radio 3.2 on Angstrom and Beagleboard, following > Philip's instruction on http://www.opensdr.com/node/17 > > 'Configure' succeed, but 'make' failed just at the beginning with the following > errors. Are you running out of RAM? This is possible. See if dmesg shows OOM messages. Philip > > ------------------------------------------------------------------- > > make all-recursive > make[1]: Entering directory `/home/cic/Prj/gnuradio-3.2.2' > Making all in config > make[2]: Entering directory `/home/cic/Prj/gnuradio-3.2.2/config' > make[2]: Nothing to be done for `all'. > make[2]: Leaving directory `/home/cic/Prj/gnuradio-3.2.2/config' > Making all in gruel > make[2]: Entering directory `/home/cic/Prj/gnuradio-3.2.2/gruel' > Making all in src > make[3]: Entering directory `/home/cic/Prj/gnuradio-3.2.2/gruel/src' > Making all in include > make[4]: Entering directory `/home/cic/Prj/gnuradio-3.2.2/gruel/src/include' > Making all in gruel > make[5]: Entering directory > `/home/cic/Prj/gnuradio-3.2.2/gruel/src/include/gruel' > make all-am > make[6]: Entering directory > `/home/cic/Prj/gnuradio-3.2.2/gruel/src/include/gruel' > make[6]: Nothing to be done for `all-am'. > make[6]: Leaving directory > `/home/cic/Prj/gnuradio-3.2.2/gruel/src/include/gruel' > make[5]: Leaving directory > `/home/cic/Prj/gnuradio-3.2.2/gruel/src/include/gruel' > make[5]: Entering directory `/home/cic/Prj/gnuradio-3.2.2/gruel/src/include' > make[5]: Nothing to be done for `all-am'. > make[5]: Leaving directory `/home/cic/Prj/gnuradio-3.2.2/gruel/src/include' > make[4]: Leaving directory `/home/cic/Prj/gnuradio-3.2.2/gruel/src/include' > Making all in lib > make[4]: Entering directory `/home/cic/Prj/gnuradio-3.2.2/gruel/src/lib' > /bin/bash ../../../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. > -I../../.. -DOMNITHREAD_POSIX=1 -I/usr/include > -I/home/cic/Prj/gnuradio-3.2.2/gruel/src/include > -I/home/cic/Prj/gnuradio-3.2.2/gruel/src/include -Wall -Woverloaded-virtual > -march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -MT realtime.lo > -MD -MP -MF .deps/realtime.Tpo -c -o realtime.lo realtime.cc > libtool: compile: g++ -DHAVE_CONFIG_H -I. -I../../.. -DOMNITHREAD_POSIX=1 > -I/usr/include -I/home/cic/Prj/gnuradio-3.2.2/gruel/src/include > -I/home/cic/Prj/gnuradio-3.2.2/gruel/src/include -Wall -Woverloaded-virtual > -march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -MT realtime.lo > -MD -MP -MF .deps/realtime.Tpo -c realtime.cc -fPIC -DPIC -o .libs/realtime.o > cc1plus: error: realtime.cc: Input/output error > g++: Internal error: Segmentation fault (program cc1plus) > Please submit a full bug report. > See<http://gcc.gnu.org/bugs.html> for instructions. > make[4]: *** [realtime.lo] Error 1 > make[4]: Leaving directory `/home/cic/Prj/gnuradio-3.2.2/gruel/src/lib' > make[3]: *** [all-recursive] Error 1 > make[3]: Leaving directory `/home/cic/Prj/gnuradio-3.2.2/gruel/src' > make[2]: *** [all-recursive] Error 1 > make[2]: Leaving directory `/home/cic/Prj/gnuradio-3.2.2/gruel' > make[1]: *** [all-recursive] Error 1 > make[1]: Leaving directory `/home/cic/Prj/gnuradio-3.2.2' > make: *** [all] Error 2 > ------------------------------------------------------------------------------- > > But I am using the latest g++.4.3.3-r19.1.6 installed by opkg, > > what's the reason of this g++ error, and how to fix it? > > Thanks > > Zhen > > > > > > > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
