Hi all,
I want use USRP as Active Radar. In first time my aim is to emit a RF
pulse at 64 MHz, and receive echo. For this i have read the comment in
"gnuradio/gr-radar-mono/src/fpga/top/config.vh", the two last lines is:
// Uncomment to enable 64 MHz Tx clock, otherwise 32 MHz
//`define TX_RATE_MAX
but if i uncomment the last line, the bitstream for fpga can be
compiled, but the result is the RF-Pulse don't exist. It is a bug which
be not reported? One people have use this without problem?
I have test many code for solve this problem, but without victory. I
have test was to rewrite in
"gnuradio/gr-radar-mono/src/fpga/lib/radar_control.v" the line:
assign tx_strobe_o = count[0]; // Drive DAC inputs at 32 MHz
in
assign tx_strobe_o = clk_i; // Drive DAC inputs at 64 MHz?
I have also test to assign the PLL clock at 128 MHz in Input of
cordic_nco in "gnuradio/gr-radar-mono/src/fpga/lib/radar_tx.v".
But nothing be good.
In second time, i want to send not a single pulse, but I/Q vector at
64 MHz, now i have use register of fpga to transfert the vector that
i want to send. That seem's be good, but maybe a more simple
solution exist? I think that the best solution was to instantiate an
tx_buffer module in gr-radar-mono, but i have no idea howto
implement this. Nobody have make a similar construction?
Thank's for all, and have a nice day ++
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
