On Tue, Apr 13, 2010 at 03:32:49PM -0400, Catalin Patulea wrote: > On Mon, Apr 12, 2010 at 12:00 PM, <discuss-gnuradio-requ...@gnu.org> wrote: > > Date: Mon, 12 Apr 2010 16:02:43 +0800 > > From: =?GB2312?B?TGlhbmcgWGluIMG66r8=?= <liangxin...@gmail.com> > > Subject: [Discuss-gnuradio] About EEPROM and FX2(68013a) USB interface > > in USRP > > To: discuss-gnuradio@gnu.org > > Message-ID: > > <o2o2579940b1004120102j64b217c0pf2ff8431da1ca...@mail.gmail.com> > > Content-Type: text/plain; charset="iso-8859-1" > > > > Hi All > > > > I am developing a board with gnuradio which is like USRP. It is also use > > FX2LP(CY7C68013a) and AD9862, and I add some surroundings. > > > > I hope that my board can work well with gnuradio, but it seems like it can > > only support USRP now. So could you please give me some help, if I want to > > run gnuradio on my board. How should I do with it? > ThinkRF (www.thinkrf.com) is also developing GNU Radio compatibility > for its product. I have been working on this project for a few months. > We're interested in feedback on the approach we took. > > Our board is also an unconfigured Cypress FX2 on power-up, so we will > have a proprietary utility that changes the personality of the board. > Once that is done, the board "looks" like a USRP, presenting the > corresponding VID/PID and responding to the USRP USB protocol.
I suggest (following Cypress's lead) that you have your device come up as something other than an unconfigured Cypress FX2. Eric _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
