Hi i am trying to synchronize two USRP2's to the reference clock 10MHz.
as per the discussions i found in the internet i have added
clocks_mimo_config(MC_WE_LOCK_TO_SMA);
just before the while(1) loop
in txrx.c and then i have compiled the code to create txrx.bin
But when i burn this txrx.bin with the downloaded u2_rev3.bin from the
trunk(gnuradio website). The USRP2 is booting up all fine(6 LED's flash once
and 2 LED's remain). but when connected to PC , it shows USRP2 not found.
to cross verify i also downloaded txrx.bin from the trunk in gnuradio website
and burnt the SD card with u2_rev3.bin. USRP2 again boots up properely , and
the USRP2 is detectable in the PC (./find_usrps)
But when i compile the firmware code and burn, the USRP2 boots properly , but
does not connect to the PC....I don't know why ??? Can somebody help me out
here ? am i missing anything ?
I compiling the firmware directory in the gnuradio3.2.2/usrp2/firmware
the compiled txrx.bin is 28KB and the downloaded txrx.bin is 25.6KB
Thanks
KRISHNA S
The INTERNET now has a personality. YOURS! See your Yahoo! Homepage.
http://in.yahoo.com/_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
