On Tue, Mar 30, 2010 at 12:05:25PM +0200, Stefan Fehrle wrote: > > Eric Blossom schrieb: > > On Tue, Mar 30, 2010 at 08:38:08AM +0200, Stefan Fehrle wrote: > >> > >> I wanted to build the USRP2 firmware to enable the testclk at J503, but > >> I > >> have some errors. I download the source with the command "git clone > >> git://gnuradio.org/gnuradio > >> " and the mb-gcc from http://gnuradio.org/tools/ > >> > >> Then I execute the commands "./bootstrap" and "./configure.gnu > >> MB_GCC=/usr/local/bin/microblaze/bin/mb-gcc". I have no errors or > >> warnings. Then I execute the command "make" and I have the following > >> errors: > > > > If you're building from the firmware directory you must use: > > > > # If in firmware directory > > ./boostrap && ./configure.gnu > > > > This will get you the correct compiler. > > > > If you build the host code and the firmware from the top of the build, > > you only need to do > > > > # If at top of build tree > > ./bootstrap && ./configure > > > >> r...@thinkpad-kubuntu:/usr/local/src/gnuradio/usrp2/firmware# make > >> make all-recursive > >> make[1]: Entering directory `/usr/local/src/gnuradio/usrp2/firmware' > >> Making all in config > >> make[2]: Entering directory > >> `/usr/local/src/gnuradio/usrp2/firmware/config' > >> make[2]: Nothing to be done for `all'. > >> make[2]: Leaving directory > >> `/usr/local/src/gnuradio/usrp2/firmware/config' > >> Making all in include > >> make[2]: Entering directory > >> `/usr/local/src/gnuradio/usrp2/firmware/include' > >> make[2]: Nothing to be done for `all'. > >> make[2]: Leaving directory > >> `/usr/local/src/gnuradio/usrp2/firmware/include' > >> Making all in lib > >> make[2]: Entering directory `/usr/local/src/gnuradio/usrp2/firmware/lib' > >> gcc -DHAVE_CONFIG_H -I. -I.. -DHAL_IO_USES_UART -I../include -I../lib > >> --std=gnu99 -Wall -Werror-implicit-function-declaration -mxl-soft-div > >> -msoft-float -mxl-soft-mul -mxl-barrel-shift -O2 -MT abort.o -MD -MP -MF > >> .deps/abort.Tpo -c -o abort.o abort.c > >> cc1: error: unrecognized command line option "-mxl-soft-div" > >> cc1: error: unrecognized command line option "-mxl-soft-mul" > >> cc1: error: unrecognized command line option "-mxl-barrel-shift" > >> make[2]: *** [abort.o] Error 1 > >> make[2]: Leaving directory `/usr/local/src/gnuradio/usrp2/firmware/lib' > >> make[1]: *** [all-recursive] Error 1 > >> make[1]: Leaving directory `/usr/local/src/gnuradio/usrp2/firmware' > >> make: *** [all] Error 2 > >> r...@thinkpad-kubuntu:/usr/local/src/gnuradio/usrp2/firmware# > >> > >> > >> I use Kubuntu 9.04 > >> > >
> I did this but it dosen't solve the problem of executing the command "make" Sorry, try this: $ export PATH=/usr/local/bin/microblaze/bin:$PATH $ ./bootstrap && ./configure.gnu $ make Eric _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
