On a fresh openSUSE 11.2, if have installed gnuradio a few days ago. After the installation, rpm -qa --last gave me python-Cheetah-2.4.0-1.3 So 21 Mär 2010 23:41:46 CET python-lxml-2.2.2-2.1 So 21 Mär 2010 23:38:17 CET python-wxGTK-2.8.10.1-2.pm.3.1 So 21 Mär 2010 23:33:44 CET wxWidgets-2.8.10.1-2.pm.3.1 So 21 Mär 2010 23:28:36 CET libmspack0-0.0.20060920alpha-69.2 So 21 Mär 2010 23:28:35 CET sdcc-devel-2.7.0-3.1 So 21 Mär 2010 23:18:49 CET sdcc-2.7.0-3.1 So 21 Mär 2010 23:18:47 CET libusb-compat-devel-0.1.3-2.2 So 21 Mär 2010 23:13:11 CET libSDL-devel-1.2.13-112.3 So 21 Mär 2010 23:08:38 CET guile-1.8.6-2.3 So 21 Mär 2010 23:08:37 CET alsa-devel-1.0.21-3.2 So 21 Mär 2010 23:08:37 CET libqwt-devel-5.2.0-0.pm.3.1 So 21 Mär 2010 23:05:48 CET libqwt5-5.2.0-0.pm.3.1 So 21 Mär 2010 23:05:48 CET libqwtplot3d-devel-0.2.7-0.pm.4.1 So 21 Mär 2010 23:05:25 CET libqwtplot3d0-0.2.7-0.pm.4.1 So 21 Mär 2010 23:05:24 CET libusb-1_0-devel-1.0.2-2.2 So 21 Mär 2010 23:04:23 CET gsl-devel-1.12-2.2 So 21 Mär 2010 23:02:35 CET gsl-1.12-2.2 So 21 Mär 2010 23:02:34 CET libcppunit-devel-1.12.0-93.2 So 21 Mär 2010 23:00:32 CET libcppunit-1_12-0-1.12.0-93.2 So 21 Mär 2010 23:00:30 CET doxygen-1.5.9-3.2 So 21 Mär 2010 22:59:58 CET fftw3-threads-devel-3.2.2-2.2 So 21 Mär 2010 22:58:02 CET fftw3-devel-3.2.2-2.2 So 21 Mär 2010 22:57:47 CET fftw3-threads-3.2.2-2.2 So 21 Mär 2010 22:57:46 CET gcc-fortran-4.4-4.2 So 21 Mär 2010 22:56:56 CET gcc44-fortran-4.4.1_20090817-2.3.4 So 21 Mär 2010 22:56:55 CET python-devel-2.6.2-6.3 So 21 Mär 2010 22:56:14 CET
Before I have upgraded to 11.2, I used 11.1 as well... so it _has_ to work. Please note, that some of the packages above are not in the standard repositories: You should use the appropriate repository from the OBS. Regards, Gregor 2010/3/22 Tom Rondeau <trondeau1...@gmail.com>: > On Fri, Mar 19, 2010 at 8:15 AM, Andrew Rich <vk4...@tech-software.net> wrote: >> Thanks Alex >> >> I forgot about that page, talk about doing things the long way around ! >> >> I installed and got:- >> >> ********************************************************************* >> The following GNU Radio components have been successfully configured: >> >> config >> gruel >> omnithread >> gnuradio-core >> pmt >> mblock >> usrp2 >> gr-usrp2 >> gr-audio-alsa >> gr-audio-jack >> gr-audio-oss >> gr-cvsd-vocoder >> gr-gsm-fr-vocoder >> gr-pager >> gr-radio-astronomy >> gr-trellis >> gr-video-sdl >> gnuradio-examples >> docs >> >> You my now run the make command to build these components. >> >> ********************************************************************* >> The following components were skipped either because you asked not >> to build them or they didn't pass configuration checks: >> >> gcell >> usrp >> gr-usrp >> gr-gcell >> gr-audio-osx >> gr-audio-portaudio >> gr-audio-windows >> gr-gpio >> gr-radar-mono >> gr-wxgui >> gr-qtgui >> gr-sounder >> gr-utils >> grc >> >> These components will not be built. > > Andrew, > > With the configure script, you can always add a "--enable-gr-usrp" or > any other component. This will force the configure script to > explicitly check that those components can be installed. If they > can't, it will immediately exit and you can see the error that caused > the exit. > > Of this group that you have listed that will not be installed, the > important ones are gr-usrp and gr-wxgui, which will allow gr-utils to > be installed. For gr-usrp, you probably need SDCC installed and for > gr-wxgui you'll need wxPython and wxGui. > > Tom > > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio > _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
