Hi,
I'm testing gnuradio with the beagle board.
I'm using:
- gnuradio 3.2.1 (with neon patch).
- libusb-1.0-0
First, I've tried benchmark_dotprod_fff:
# ./benchmark_dotprod_fff
generic: taps: 256 input: 4e+07 cpu: 1119.820 taps/sec: 9.144e+06
cortex_a8: taps: 256 input: 4e+07 cpu: 43.391 taps/sec: 2.36e+08
(and I believe it is ok)
Then, I've tried usrp_benchmark_usb, with very low performance:
./arm-angstrom-linux-gnueabi-usrp_benchmark_usb.py
Testing 2MB/sec... [ 718.592163] usb 1-2: USB disconnect, address 2
[ 719.116760] usb 1-2: new high speed USB device using ehci-omap and
address 3
[ 719.283386] usb 1-2: configuration #1 chosen from 1 choice
gr_vmcircbuf_createfilemapping: createfilemapping is not available
gr_vmcircbuf_sysv_shm: shmat (2): Invalid argument
usb_throughput = 2M
ntotal = 1000000
nright = 994162
runlength = 994162
delta = 5838
OK
Testing 4MB/sec... usb_throughput = 4M
ntotal = 2000000
nright = 1982575
runlength = 1982575
delta = 17425
OK
Testing 8MB/sec... uUuUuUuUuOuOuOuOuOuOuOuOuOuOuOuOuOuOuOusb_throughput = 8M
ntotal = 4000000
nright = 3720433
runlength = 22608
delta = 3977392
FAILED
Testing 16MB/sec...
uUuOuUuOuUuOuUuOuUuUuOuUuOuUuOuUuUuOuUuOuUuOuUuUuOuUuOuUuUuOuUuOuUuOuUM
ntotal = 8000000
nright = 1934045
runlength = 0
delta = 8000000
FAILED
Testing 32MB/sec...
uUuOuUuOuUuOuUuUuOuUuOuUuOuUuUuOuUuOuUuOuUuUuOuUuOuUuOuUuUuOuUuOuUuOuUM
ntotal = 16000000
nright = 167550
runlength = 0
delta = 16000000
FAILED
Max USB/USRP throughput = 4MB/sec
Do you have any suggestion?
thanks
andrea
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
