We received 4 new USRP2s this week with 2GB SD cards labelled 20091209. None of the USRP2s boot up, i.e. "flash the LEDs" with these SD cards. I tried one of these cards in an older USRP2 and it didn't work there either, but using an older 1GB SD card (not sure what revision of FPGA or firmware) in one of the new USRP2s does (at least) flash the LEDs.
I've tried reburning a new 2GB SD card with u2_flash_tool with various revisions of txrx.bin and u2_rev2.bin without success. I've never done this before so it's likely there is something wrong with my procedure but I'm running out of things to try. I am wondering if there is something about the 2GB SD cards that shipped with the USRP2s as well as the one I bought (none of them are HCSD of course but the one I bought yesterday is a Lexar Platinum II 60x). I assume the LEDs should flash. Needless to say, find_usrps doesn't see any USRP2s when I run it. _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
