> I am using USRP1 + RFX2400. > > You know there are two antenna ports on RFX2400 daughter card those are RX2, > TX/RX. Is it possible to use both these ports in parallel for data > reception. If yes then pelase provide me little clue how I should do it, or > may be refer me to some existing example. > > I have two RFX2400 daughter cards and my problem is to use two different > ports for data reception, it doesnt matter if I use two ports on a single > card (i.e RX2, and RX/TX), or two ports on two different cards (e.g. RX2 on > each card). Please let me know which one is possible and easier to implement > and please also refer me to some application where I can find relevant code. >
I do not believe it is possible to receive data from the TX/RX and TX port simultaneously, I believe the are tied to the same set of ADCs. You should use two RFX cards if you are planning on doing MIMO reception. Check in the examples section, I don't think there is a specific 2 antenna receive example with the 2400's; but there is a 4rx fm receiver that you should be able to extrapolate from. Jason _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
