Thomas Graf wrote:
Hi Matt,
I have not gotten the xcvr2450 driver ported the USRP2 yet. As of now
all daughterboards except for the DBSRX and XCVR2450 are supported.
Those last 2 will be supported soon.
Because I would really need this working soon I began to port that
myself. So far no success yet. I get it discovered now (db 0x61).
I get the debugging over the UART. Unfortunately I don't find the
schematic of the XCVR2450. Is it somewhere available as PDF?
I'm already reading the Maxim's data sheet.
If "soon" means in the next days i would wait ;)
It will be a little while yet, since there are other things on the list
of todos...
I tried to use another SD-Card, but it didn't work. Only with the
original SD-Card is working. Is there some other brand which is known to
be working with the USRP2? I'm just afraid I might destroy the card
always keeping re-flashing the firmware.
Many SD cards require a 3.3V interface and we use 2.5V. The card we
supply is known to work, as are most from that company, Patriot. You
are unlikely to hurt the card by reflashing it a lot. They are
specified for thousands of cycles.
Matt
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
