Hello again, After hearing about success cases of GNU Radio and the USRP GUI tools on Fedora 8 and 9, and after reviewing and retesting the previously described setup, I've reinstalled my whole GNU Radio environment under Fedora 9 (vs Fedora 8) using the same laptop. Fedora 9 has been fully updated today. I'm using GNU Radio 3.1.3 but I'm still suffering the same GUI-based tools freeze issue.
When running "usrp_oscope.py" (or other GUI tools, like "usrp_wfm_rcv.py") I get the following warning messages: # usrp_oscope.py -f 2.412G ** (python:2988): WARNING **: IPP request failed with status 1030 ** (python:2988): WARNING **: IPP request failed with status 1030 uOuOuOuOuOuOuOuOuOuOuOuOuOuOuOKilled # After some searching, I didn't find how to remove and solve them, although they seem to be related with wxPython (and perhaps the issue I'm suffering). Could anyone confirm this? I've tried to run other (non GNU Radio) wxPython basic examples, such as "/usr/share/doc/wxPython-2.8.7.1/samples/wxProject/wxProject.py", and they work fine. Some details about the current setup: - wxPython versions: # rpm -aq | grep -i wx wxPython-devel-2.8.7.1-5.fc9.i386 wxBase-2.8.7-2.fc9.i386 wxGTK-gl-2.8.7-2.fc9.i386 wxGTK-devel-2.8.7-2.fc9.i386 wxPython-2.8.7.1-5.fc9.i386 wxGTK-2.8.7-2.fc9.i386 - CPU: # cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Genuine Intel(R) CPU 2.80GHz stepping : 9 cpu MHz : 1596.000 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe up pebs bts cid xtpr bogomips : 3196.88 clflush size : 64 power management: - Graphical card and USB bus/ports: (I'm using the USB 2.0 bus/port) # lspci 00:00.0 Host bridge: ATI Technologies Inc RS200/RS200M AGP Bridge [IGP 340M] (rev 02) 00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 340M] 00:0b.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50) 00:0b.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50) 00:0b.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon IGP 330M/340M/350M - Kernel version: # uname -a Linux aereo 2.6.26.3-29.fc9.i686 #1 SMP Wed Sep 3 03:42:27 EDT 2008 i686 i686 i386 GNU/Linux Any suggestion about how to troubleshoot this GUI issue? I'm starting to think it is related to the hardware I'm using. Thanks for your help! -- Raul Siles On Tue, Sep 9, 2008 at 2:02 AM, Robert McGwier <[EMAIL PROTECTED]> wrote: > As Matt is so fond of pointing, I LOVE to install new toys. > > I have F 8,9, Ubuntu 8.04 with F8 and F9 on x86, x86_64, PPC, and > Cell. I have Ubuntu 8.04 on x86, x86_64. > > They all do gnuradio. > > Bob > > > On Mon, Sep 8, 2008 at 7:56 PM, Eric Blossom <[EMAIL PROTECTED]> wrote: > >> Fedora 7, 8, and 9 are known to work fine. I us them. >> >> Eric >> > _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
