>>>>> "Brian" == Brian Padalino <[EMAIL PROTECTED]> writes:
Brian> On Mon, Mar 31, 2008 at 11:46 AM, Uwe Bonnes
Brian> <[EMAIL PROTECTED]> wrote:
>> Hello,
>>
>> has there been any effort to expose more JTAG functionality via the
>> FX2 so that the USRP FX2 firmware could be used with modified other
>> JTAG software, like xc3sprog.
Brian> As far as I can tell, not without some hardware modification.
Ah, sorry, I use an xguff(recycle.lbl.gov/~ldoolitt/xguff.html ) like
hardware.
Brian> According to the schematics found here:
Brian>
Brian>
http://gnuradio.org/trac/browser/usrp-hw/trunk/usrp/interface.pdf?format=raw
Brian> The JTAG section of the FPGA is pulled either high or low and has
Brian> no other connections. You're obviously free to do what you want
Brian> with your hardware, but I don't think you'll get much extra
Brian> support from the mailing list?
For the original USRP, my question doesn't apply. I didn't realize that with
my first post. However modified setups are used in different places and
perhaps someone, has hints for me.
--
Uwe Bonnes [EMAIL PROTECTED]
Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt
--------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
