Hi Johnathan, Sorry for not being clear. I was making a new usrp_source.py & usrp_sink.py files (attached below) to be posted to gunradio. Testing the new usrp_source.py code was ok for all frequencies and daughter boards. However, testing usrp_sink.py code, with TX frequencies between 44MHz and 83 MHz gave me the tuning function failing indication which I use it to print the message "Failed to set TX frequency". This is strangely happening to the Basic TX daughter board only in this frequency range.
Firas, http://www.nabble.com/file/p11435727/new_usrp_source.py new_usrp_source.py http://www.nabble.com/file/p11435727/new_usrp_sink.py new_usrp_sink.py . Johnathan Corgan-2 wrote: > > Eng. Firas wrote: > >> I think there is a problem in setting TX frequency of Basic daughter >> board >> using the USRP "tune" function in the range from (45MHz to 83MHz)!. >> Outside this range, the tune function is working fine. > > You'd have a much higher chance of getting a useful reply if you > included a description with more content than "there is a problem." > > What is happening that shouldn't be happening? > > What isn't happening that should be happening? > > What do you see on your screen? > > Has it worked before but something changed and now it is not working? > What changed? > > -- > Johnathan Corgan > Corgan Enterprises LLC > http://corganenterprises.com > > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > -- View this message in context: http://www.nabble.com/Failed-to-set-TX-frequency%21%21-tf4025764.html#a11435727 Sent from the GnuRadio mailing list archive at Nabble.com. _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
