On 2/15/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
I am currently working with GNU radio and USRP board with its transceiver
daughtercards for transmitting and receiving signals. I have recently aqcuired
new RF front end hardware that can mix a baseband signal up to 3.4 GHz and
transmit it. The interface to the new RF hardware is thru BNC cables. I want
to know if there is a way that I can do all the processing in GNU radio, send
the data through the usrp board to and the transmit DAC's, and then send the I
and Q channels from the DAC to the new RF front end hardware. For example, are
there pins on the USRP board (or daughtercards) that I can pull the I/Q data
off of to send to the new hardware?
Thanks
Nick
You can pick up the baseband differential analog signals of I/Q from
the daugherboard header. I believe the dboard.sch in the usrp-hw
module under SVN would be helpful.
http://gnuradio.org/trac/browser/usrp-hw/trunk/usrp
Brian
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
