Hey all, I am playing with reconfiguring the USRP while its running and I was trying to figure out some kind of benchmark time (on the order of...?) that it might take to reconfigure different settings for the USRP.
(1) frequency (2) interpolation / decimation (3) mux (4) etc. I know that when you use the wfm GUI's these parameters can be set "instantly" from a user point of view, but I'm a little more interested in a more numerical answer (more on the ms or us level...or clock cycle!) I realize the latency is much longer the first time you set the USRP, but I'm more concerned with REconfiguration. In the case of the receive "set_freq" method for the RFX900, I have looked through some of the code, and it seems like there is a function in db_flexrf.py that writes to the FPGA registers _write_all that appears to be the final step before heading to the FPGA. Is this right?? I tried to put some print statements ( print time.time() ) in the code to do an informal time test to see how fast it might take, but it didn't work...so either I'm wrong about this method being involved in setting the frequency or I'm editing the wrong document. (FYI, I used the script in the ../site-packages/gnuradio/db_flexrf.py folder). Going along with the idea of latency in the reconfiguration process, I was wondering if you loose samples while changing settings or is it pretty seemless (i.e. in the case of decimation, I'm guessing there is a significant time lag to reset the FPGA decimators, but in the case of setting the carrier frequency, I would expect there to be less loss of data and more than likely less latency), or perhaps there is a buffer that holds the data until its ready to run again? Any help on quantifying the latency, and perhaps some help understanding what happens at the bit level to the samples in the FPGA during reconfiguration would be most appreciated. THANKS, David Scaperoth _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
