Hello all and thanks for your.
I finally got all the baseline and gnuradio software installed per
KD7LMO.net with some modification and still some question, for instance:
1- In the install_baseline.sh there is the installation of
xerces-c-src-2_6_0 but not in the baseline build shell or in the list of
items needed. I did not install this package, is this ok?
2- Is the Octave/Octave-forge package needed? I did build and
installed these packages.
3- Should any of these packages, including gnuradio, be
installed with sudo?
I then tried to do install my brand new USRP, =), based on the wiki
UsrpInstall. Here are the problems I have encountered and need help with:
1- The directory /usr/local/share/usrp/rev2 was not created with the
required files (firmware). I created the directory and added the files as
root manually. Running the program test_usrp_standard_tx does not seem to
install the firmware file in the directory. Most likely related to #3 above
but not I did try to do gnuradio install with sudo and it did not put the
fillies. I did use CVS and per the instruction, I manually copied the file
usrp_fpga.rbf to the directory.
2- When I run test_usrp_standard_tx I get the error - can't find
usrp_fpga.rbf. The LED on the USRP does change from 2Hz to 1Hz, so the
firmware did get loaded.
3- I do have hotplug running and seem to have permission to access the
USRP device (when I had a camera to the USB port, it loaded automatically).
When I check the /etc/hotplub/usb, I do not see usrp or usrp.usremap.
4- When I run the example usrp_oscope.py I get the error No module
named gnuradio.
Please help.
Mike
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
