I get the same thing in Redhat FC4.
~Chris~ ----- Original Message ----- From: Javs <[EMAIL PROTECTED]> Date: Tuesday, October 18, 2005 12:13 pm Subject: Re: [Discuss-gnuradio] usb_claim_interface error > > > No clue. Is there anything interesting in the > > kernel logs? > > Nothing going on in the logs when i run the code. But > the usb allocates a new address to the usb (old > adress+1) upon reconnecting the power cable. > > Here are a few more observations i made: > > When i do a 'lsusb' upon system restart, I get the > usrp on Bus 1 and device 2 after i force the > bitstream. Now, when i disconnect and reconnect the > power, the device changes to 3 with default > permissions of '-rw-rw-r--' and the device address > increments upon further reconnects. As a test, here i > forced the bitstream (so that the examples work) and > then changed the permission by 'chmod 000 -R > /proc/bus/usb/001/*'. After this, no usrp found as > expected. Changed back to 'chmod 777 -R > /proc/bus/usb/001/*' and it works again. > > So, look like it does not stabilize on the device > address after power reconnect. The changing of > permissions (777) is not effected as it is creating a > new mount with a new address at each reconnect with > default permissions(664). > > Still experimenting ! > > -Javs > > > > __________________________________ > Start your day with Yahoo! - Make it your home page! > http://www.yahoo.com/r/hs > > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio > _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
