Hello,
On Thu, 5 Jul 2018 10:55:26 +0200, Christophe Lyon wrote:
> > /tmp/cceTVltl.s: Assembler messages:
> > /tmp/cceTVltl.s:14: Error: selected processor does not support ARM opcodes
> > /tmp/cceTVltl.s:19: Error: attempt to use an ARM instruction on a
> > Thumb-only processor -- `sub r4,pc,#8'
> > /tmp/cceTVltl.s:20: Error: attempt to use an ARM instruction on a
> > Thumb-only processor -- `ldr r1,.L__ROFIXUP_LIST__'
> > /tmp/cceTVltl.s:21: Error: attempt to use an ARM instruction on a
> > Thumb-only processor -- `add r1,r1,r4'
> > /tmp/cceTVltl.s:22: Error: attempt to use an ARM instruction on a
> > Thumb-only processor -- `ldr r2,.L__ROFIXUP_END__'
> > /tmp/cceTVltl.s:23: Error: attempt to use an ARM instruction on a
> > Thumb-only processor -- `add r2,r2,r4'
> > /tmp/cceTVltl.s:24: Error: attempt to use an ARM instruction on a
> > Thumb-only processor -- `movs r0,r8'
> > /tmp/cceTVltl.s:25: Error: attempt to use an ARM instruction on a
> > Thumb-only processor -- `moveq r0,r7'
> > /tmp/cceTVltl.s:26: Error: attempt to use an ARM instruction on a
> > Thumb-only processor -- `push {r7,r8,r9,r10}'
> > /tmp/cceTVltl.s:27: Error: attempt to use an ARM instruction on a
> > Thumb-only processor -- `bl __self_reloc'
> > /tmp/cceTVltl.s:28: Error: attempt to use an ARM instruction on a
> > Thumb-only processor -- `pop {r7,r8,r9,r10}'
> > /tmp/cceTVltl.s:29: Error: attempt to use an ARM instruction on a
> > Thumb-only processor -- `mov r1,r7'
> > /tmp/cceTVltl.s:30: Error: attempt to use an ARM instruction on a
> > Thumb-only processor -- `mov r2,r8'
> > /tmp/cceTVltl.s:31: Error: attempt to use an ARM instruction on a
> > Thumb-only processor -- `mov r3,r9'
> > /tmp/cceTVltl.s:32: Error: attempt to use an ARM instruction on a
> > Thumb-only processor -- `mov r4,sp'
> > /tmp/cceTVltl.s:33: Error: attempt to use an ARM instruction on a
> > Thumb-only processor -- `sub r5,sp,#8'
> > /tmp/cceTVltl.s:34: Error: attempt to use an ARM instruction on a
> > Thumb-only processor -- `sub sp,sp,#16'
> > /tmp/cceTVltl.s:35: Error: attempt to use an ARM instruction on a
> > Thumb-only processor -- `str r4,[sp,#4]'
> > /tmp/cceTVltl.s:36: Error: attempt to use an ARM instruction on a
> > Thumb-only processor -- `str r5,[sp,#0]'
> > /tmp/cceTVltl.s:37: Error: attempt to use an ARM instruction on a
> > Thumb-only processor -- `mov r9,r0'
> > /tmp/cceTVltl.s:38: Error: attempt to use an ARM instruction on a
> > Thumb-only processor -- `mov r4,r9'
> > /tmp/cceTVltl.s:39: Error: attempt to use an ARM instruction on a
> > Thumb-only processor -- `bl _dl_start'
> > /tmp/cceTVltl.s:40: Error: attempt to use an ARM instruction on a
> > Thumb-only processor -- `ldr r10,.L_dl_fini_gotofffuncdesc'
> > /tmp/cceTVltl.s:41: Error: attempt to use an ARM instruction on a
> > Thumb-only processor -- `add r10,r10,r4'
> > /tmp/cceTVltl.s:42: Error: attempt to use an ARM instruction on a
> > Thumb-only processor -- `ldr r5,[sp,#8]'
> > /tmp/cceTVltl.s:43: Error: attempt to use an ARM instruction on a
> > Thumb-only processor -- `ldr r9,[sp,#12]'
> > /tmp/cceTVltl.s:44: Error: attempt to use an ARM instruction on a
> > Thumb-only processor -- `add sp,sp,#16'
> > /tmp/cceTVltl.s:45: Error: attempt to use an ARM instruction on a
> > Thumb-only processor -- `bx r5'
> > /tmp/cceTVltl.s:47: Error: attempt to use an ARM instruction on a
> > Thumb-only processor -- `b .loopforever'
> > make[2]: *** [ldso/ldso/ldso.oS] Error 1
> > make[1]: ***
> > [/home/test/outputs/arm-fdpic/build/uclibc-1.0.30/.stamp_built] Error 2
> > make: *** [_all] Error 2
> >
> > Any idea ?
> >
>
> Thanks for checking that. I did build with a GCC defaulting to Thumb
> mode, but it still uses a CPU that supports ARM mode, so I missed
> these problems.
Thanks for your quick feedback.
So you mean that you tested building for a Cortex-A platform and not
Cortex-M ?
Since this FDPIC work is mainly intended for noMMU platforms, my first
test was to build a toolchain targeting Cortex-M, which only support
Thumb 2.
Best regards,
Thomas
--
Thomas Petazzoni, CTO, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
_______________________________________________
devel mailing list
devel@uclibc-ng.org
https://mailman.uclibc-ng.org/cgi-bin/mailman/listinfo/devel
