Hi Jesse

Thanks for your answer. I checked the specs [1] [2]:

* ZCU104

UART0 (MIO 18-19)
Primary Zynq UltraScale+ MPSoC PS-side UART interface, connected to the U151 
FT4232HL USB-to-Quad-UART.
PS-side UART0 is accessed through the U151 FT4232HL USB-to-Quad-UART bridge 
BDBUS port.
The UART connections from XCZU7EV MPSoC U1 PS-side MIO 18 and 19 to the 
FT4232HL device through level-shifter U161.

UART1 (MIO 20-21)
PS-side UART1 is accessed through the U151 FT4232HL USB-to-Quad-UART bridge 
CDBUS port.

* ZCU102

UART0 (MIO 18-19)
Primary Zynq UltraScale+ MPSoC PS-side UART interface, connected to the U40 
CP2108 USB-to-Quad-UART bridge.
PS-side UART0 is accessed through the U40 CP2108 USB-to-Quad-UART bridge port 0.

UART1 (MIO 20-21)
PS-side UART1 is accessed through the U40 CP2108 USB-to-Quad-UART Bridge port 1.

According to this the UARTs are quite different. So the ZCU104 does not run out 
of the box and may require (quite) some work. Do you concur?

Kind regards,

derek

[1] - 
https://www.xilinx.com/support/documentation/boards_and_kits/zcu104/ug1267-zcu104-eval-bd.pdf
[2] - 
https://www.xilinx.com/support/documentation/boards_and_kits/zcu102/ug1182-zcu102-eval-bd.pdf

‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Tuesday, July 9, 2019 3:58 PM, Jesse Millwood 
<[email protected]> wrote:

> Derek,
>
> We haven't tried it on any other ZUS+ boards. It should be pretty close but 
> you may want to make sure that the UART isn't different between the boards.
>
> Jesse
>
> On 2019-07-09 6:24 a.m., derek65 wrote:
>
>> Hi,
>>
>> I'm interested in running sel4 on a Xilinx Zynq UltraScale+ MPSoC evaluation 
>> board. I read the great blog post about the port from DornerWorks [1] and 
>> checked the sel4 hardware support page here [2].
>>
>> Since the Zynq ZCU102 Evaluation Kit listed is quite expensive, I wanted to 
>> ask if anyone tried the procedure described in the blog post on the much 
>> cheaper Xilinx US+ ZCU104 Evaluation Kit. Might this work as well?
>>
>> Thanks!
>>
>> Kind regards,
>> - derek
>>
>> [1] - 
>> https://dornerworks.com/blog/hardware-security-growing-concern-sel4-ecosystem-offers-one-solution
>> [2] - https://docs.sel4.systems/Hardware/
>>
>> _______________________________________________ Devel mailing list 
>> [email protected] https://sel4.systems/lists/listinfo/devel
_______________________________________________
Devel mailing list
[email protected]
https://sel4.systems/lists/listinfo/devel

Reply via email to