Hello,
I'm new to seL4 and I'm trying to get seL4 running on an Cortex-A7 with VE
extensions (NXP IMX6UL).
One of the experiments I wish to do is measure how fast I can get from POR
to seL4 doing something meningful.
To achive optimal boot speed I have a custom bootloader that does the bare
minimum.
The boot flow looks like this;
1. POR
2. Init HW
3. Load & verify blobs for trust zone and seL4
4. Jump to TEE init (OP-TEE)
5. Tee init code returns to bootloader with the CPU in HYP mode
At this point we're back in the bootloader, there is no MMU, D cache or I
cache active
6. Configure MMU
7. Jump to seL4 kernel entry
I'm currently struggling with getting the MMU properly setup and I was
hoping that someone here might shed some light on
what I would need to do. I've looked at the elf-loader and from what I can
understand it will setup a basic memory-mapping
for the kernel only.
Some of the questions that stand out in my head are :
1) How should the hand over work between the BL and seL4 with respect to
setting up more mappings, for example IO memory. Should the PGD & PMD
tables
created by the bootloader be shared with the kernel?
2) What needs to be configured before calling the seL4 entry?
Thanks,
Jonas
_______________________________________________
Devel mailing list
[email protected]
https://sel4.systems/lists/listinfo/devel
