Does the fault occur before or after the kernel page directory is activated? https://github.com/seL4/seL4/blob/master/src/arch/arm/kernel/boot.c#L189
- Alex Kroh On Tue, 2017-01-24 at 17:17 +0100, Wladislav Wiebe wrote: > could it be an TLB fault? For my understandig, based on > http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0438g/BABFFDFD.html > it is the DFSR = 0x7 -> b00111 > Translation fault, 2nd level. > > > Thanks! > - Wladislav Wiebe > > 2017-01-24 15:42 GMT+01:00 Wladislav Wiebe <[email protected]>: > > Hello, > > > > has somebody experience with running into arm_data_abort_exception > > after enabling the MMU/paging and jumping to the kernel image: > > .. > > ELF-loader started on CPU: ARM Ltd. Cortex-A15 r2p4 > > paddr=[90000000..904b041f] > > ELF-loading image 'kernel' > > paddr=[80000000..80033fff] > > vaddr=[f0000000..f0033fff] > > virt_entry=f0000000 > > ELF-loading image 'sel4test-driver' > > paddr=[80034000..8042dfff] > > vaddr=[10000..409fff] > > virt_entry=1e924 > > Enabling MMU and paging > > Jumping to kernel-image entry point... > > > > check_data_abort_exception() > > DFAR = 0xfff01014 > > DFSR = 0x7 > > ADFSR = 0x0 > > abort() called. > > > > I've dumped the DFAR/DFSR register -- > > > > Relevant config parts about the setup: > > CONFIG_ARCH_ARM_V7A=y > > CONFIG_ARCH_ARM=y > > CONFIG_ARCH_AARCH32=y > > CONFIG_ARM_CORTEX_A15=y > > CONFIG_PLAT_KEYSTONE=y > > > > > > Thanks in advance! > > -- > > WBR, Wladislav WIebe > > > _______________________________________________ Devel mailing list [email protected] https://sel4.systems/lists/listinfo/devel
