> On Jun 6, 2016, at 5:53 PM, Eric S. Raymond <e...@thyrsus.com> wrote: > > Five Pis and an Odroid are now up and running, fully configured, and > ready for test/profiling use. The mix looks like this: > > au RasPi 2 Blue-wired SKU 424254 > cu RasPi 3 Uputronics GPS HAT > fe RasPi 3 Adafruit GPS HAT > nd RasPi 3 Adafruit GPS HAT > ne RasPi 3 Adafruit GPS HAT > xe Odroid C2 Adafruit GPS HAT > > Important caveat: the Odroid lacks the kernel support to do 1PPS. Until I > can beat Hardkernel into fixing that
Have you considered a different kernel for the Odroid (or rolling your own)? If you’re using what they have on their site, it’s quite old. I know this is out of scope for the HowTo, but if the Mfg supplied kernel doesn’t/won’t support PPS, then either the Odroid is out as a platform, or you roll your own. If you roll your own, it could be made available with the How To, like the other scripts/tools. > Except for the rack, I think the buildout is done at this point - at least > until we get a BeagleBone cape to work with I saw somewhere that the Adafruit GPS HAT for the Pi should “just work” for the BeagleBone… Have you given any consideration of how to maintain these now (sysadmin stuff - updates, etc.)? The Pis are all the same (for now - the Pi's may eventually get a 64-bit distro). Somehow you’ll need to follow updates, architecture changes (like the dtb overlays on the Pi’s), etc. This would be 3 x systems to follow - Pi, Odroid & BeagleBone... _______________________________________________ devel mailing list devel@ntpsec.org http://lists.ntpsec.org/mailman/listinfo/devel
