> On May 20, 2016, at 10:10 AM, Eric S. Raymond <e...@thyrsus.com> wrote:
>
> I now have, at
>
> http://www.catb.org/esr/faqs/stratum-1-microserver-howto/
Regarding this:
Make sure your SD card is right-side-up
I don’t think any SD card (micro or regular size) can be fully inserted upside
down. At least it won’t on any of the readers I have. I just tested a
Raspberry Pi B+ & the micro-SD card cannot be fully inserted upside down.
Are you thinking a user might just barely have the SD card inserted, upside
down? If so, it might be worth mentioning the following:
All Pi’s that use a micro-SD card, except the Pi 3, have a spring loaded
micro-SD slot. If the user does not “feel” the springiness, then the card is
either inserted only partially, whether it’s upside down or right side up. The
Pi’s that use a full size SD card & the Pi 3 have slots that are just friction
fit.
OR
Just state which direction (up or down) the SD card must be inserted & mention
the springiness stuff.
Thanks,
Frank
_______________________________________________
devel mailing list
devel@ntpsec.org
http://lists.ntpsec.org/mailman/listinfo/devel
