> On May 20, 2016, at 2:39 PM, Eric S. Raymond <e...@thyrsus.com> wrote: > > Anthony Stirk <upu...@gmail.com>: >> Will respond more later but serial port thing fixed here : >> >> https://www.raspberrypi.org/forums/viewtopic.php?f=66&t=148515 > > I attempted to follow one set of those directions. Specifically, > I changed /boot/config.txt so enable_uart=1 and disabled auto because > the enable for it was on the line above rthat - seems like they might > have both been put there by raspi-config. > > That looked like it ought to work, But it didn't. Sigh. > > If anyone has a /boot/config.txt and /boot/cmdline.txt that makes > the GPS visible under 2016-05-10-raspbian-jessie-lite, I'd love to see it.
Please see this page: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=141195 It explains the change in UART behavior & what the options are used for. “enable_uart=1” is used if you want a UART **console** on boot-up. I suspect this would prevent the use of the UART for other purposes (GPS hat). I’m working on a good set of boot options now. Thanks, Frank
_______________________________________________ devel mailing list devel@ntpsec.org http://lists.ntpsec.org/mailman/listinfo/devel
