Hey,
Thx! :D
I have the same issue with the map in my app, it’s popping the page from the
stack when scrolling. I’m just about to try it on the actual phone (which I
received yesterday, yay!) to see how it behaves there…I’ll get back to you with
the results.
About the pinch actions: I haven’t found a way to do that on the emulator,
maybe someone else knows?
//bob
On 23 dec 2013, at 22:43, Sylvain B. <sth...@hotmail.com> wrote:
> Hi again Bob,
>
> Just to let you know that your Map example is working fine (I like the
> blinking icon!) if you put it on the first page of your app, but if you put
> it on the second page, when you try to flick to the west, it actually pop the
> page off the stack.
> I am not asking for a solution right now because I won't have much time to
> work on it in the following weeks, but I am just letting you know in case you
> work on your example :)
>
> Last question while I am here: It may have already been asked, but is it
> possible to do Pinch actions on the emulator?
>
> Thanks again for the help!
> Sylvain.
>
> From: sth...@hotmail.com
> To: devel@lists.sailfishos.org
> Date: Mon, 23 Dec 2013 00:23:09 +0000
> Subject: Re: [SailfishDevel] (QtLocation 5.0) Coordinate is not a type
>
> Chris: I replied to you in private by error, so I am resaying here in the
> mailing-list: Thank you a lot, that's what I was missing!! It works now! I
> was sure that it was simple, but there is just not enough (not at all?) doc
> for Qt newbies like me =(
>
> Bob: Wow, it may not be finished, but your doc is already great and describe
> exactly what I was missing! Thank you. And if you have time to complete your
> TODO section, that would be a super doc to put directly on SailfishOs.org!
> Thanks for sharing :)
>
> --
> Sylvain.
>
> > Date: Sun, 22 Dec 2013 23:43:18 +0100
> > From: christopher.l...@thurweb.ch
> > To: devel@lists.sailfishos.org; sth...@hotmail.com
> > Subject: Re: [SailfishDevel] (QtLocation 5.0) Coordinate is not a type
> >
> > Hi Sylvain
> >
> > I've just got it working!
> >
> > I added
> >
> > qt5-plugin-geoservices-nokia
> >
> > to the "PkgBR" and "Requires" sections of the Yaml file, et voila,
> > Belle Paris sur L'emulatuer ....
> >
> > Have fun
> >
> > Chris
> >
> >
> > Zitat von "Sylvain B." <sth...@hotmail.com>:
> >
> > >
> > >
> > >
> > > Hello,
> > >
> > > I come back here because I am definitely not able to display a simple Map
> > > :(
> > > What I have done is:
> > > - Take the HelloWorld example generated by QtCreator.
> > > - Replace the content of SecondPage.qml by the code below.
> > >
> > > And I just get an empty page with the following error message in the logs:
> > > QML Map: Error: Plugin does not support mapping.
> > > Error message: The geoservices provider is not supported.
> > > If I remove the Plugin, I get the same empty page but without the
> > > error message.
> > > I have regenerated new token from here.com (I there a specific
> > > option to set?)
> > >
> > > I don't know what I need to do to make it working, is it in the .pro
> > > file? :(
> > > So I would really use either some tips or a working example.
> > >
> > > Thank you in advance!
> > >
> > > ----
> > >
> > > import QtQuick 2.0
> > > import Sailfish.Silica 1.0
> > > import QtLocation 5.0
> > > import QtPositioning 5.1
> > >
> > >
> > > Page {
> > > Map {
> > > anchors.fill: parent
> > > plugin : Plugin {
> > > name : "nokia";
> > > parameters: [
> > > PluginParameter { name: "app_id"; value: "xxx" },
> > > PluginParameter { name: "token"; value: "xxx" }
> > > ]
> > > }
> > > center: QtPositioning.coordinate(48.856047, 2.353907) // Paris
> > > }
> > > }
> > >
> > > From: sailf...@jelica.se
> > > Date: Thu, 19 Dec 2013 15:50:14 +0100
> > > To: devel@lists.sailfishos.org
> > > Subject: Re: [SailfishDevel] (QtLocation 5.0) Coordinate is not a type
> > >
> > > I have an example project showing a map and a location.Will try
> > > publishing it online later tonight/tomorrow so you guys don?t have
> > > to walk to Mordor and back like I did to get it working ;)
> > > //bob
> > >
> > > On 19 Dec 2013, at 14:45, Sthocs <sth...@hotmail.com> wrote:tw_bolek
> > > <tw_bolek@...> writes:
> > >
> > >
> > > <at> Bolek, have you got it working?
> > >
> > > Yes, it does work this way. Thank you *VERY MUCH* Chris for your help!
> > > For my needs now it's even better than
> > > previously as on Harmattan I then had to use Qt.createQmlObject for what I
> > > needed to get.
> > >
> > > Thanks a lot!
> > >
> > > BTW. Do you perhaps now the URL of the site where one can register to get
> > > the API key to use Nokia Maps plugin? If
> > > I try to use it without any key it says to go to
> > > https://api.developer.nokia.com but that URL just
> > > redirects to the main Nokia Developer page. I can't find the right place
> > > to register...
> > >
> > > _______________________________________________
> > > SailfishOS.org Devel mailing list
> > >
> > >
> > >
> > >
> > > Hello,
> > >
> > > I also wanted to use a Map in my application, and I am still struggling.
> > > I already figured out that:
> > > - We have to install QtLocation/QtPositioning in the SDK
> > > - We have to manually install them in the emulator (I just found out about
> > > pkcon and zypper)
> > > - We need to use QtPositioning.coordinate instead of Coordinate.
> > >
> > > But now, if I try to display the simplest Map, I just get a blank screen.
> > > I
> > > have a message telling me that there is an error with the Plugin I use
> > > (does
> > > not support something - sorry I don't have the precise error message here)
> > >
> > > I am sure it's something simple (some entry missing in the .pro?) but I
> > > could not find what yesterday, and I don't have so much time to search (It
> > > was really cool with Harmattan to have an example out of the box that we
> > > could just copy/paste and start customizing).
> > >
> > > Would it be possible to have a simple example in the doc explaining all
> > > the
> > > required steps?
> > > Or do you see what I am missing? For the plugin, I just put the same than
> > > for Harmattan:
> > > plugin : Plugin {
> > > name : "nokia";
> > > parameters: [
> > > PluginParameter { name: "app_id"; value: "APPID"
> > > },
> > > PluginParameter { name: "token"; value: "TOKEN"
> > > }
> > > ]
> > > }
> > >
> > > Thanks for your help!
> > >
> > > _______________________________________________
> > > SailfishOS.org Devel mailing list
> > >
> > > _______________________________________________
> > > SailfishOS.org Devel mailing list
> > >
> >
> >
> >
>
> _______________________________________________ SailfishOS.org Devel mailing
> list
> _______________________________________________
> SailfishOS.org Devel mailing list
_______________________________________________
SailfishOS.org Devel mailing list
