Hello,
Thanks for your reply, apparently I hadn't read a part of your reply (I was
viewing it on my N900).
I discovered the other part of your reply only when I reread the message on my
computer ;)
Well, anyway, I have now just created a new project and copied over my C++
source files and .qml's, I also edited the main.cpp/QuickClamshell.cpp to this
one (thanks Artem! :) )
and my app now runs in the emulator of the 1312 SDK release. It also created
i586 RPMs. But unfortunately for some reason it doesn't create armv7hl RPMs
when I switch to the armv7hl target and build it with MerSDK-SailfishOS-armv7hl
-> Release -> Deploy As RPM or Deploy By Building An RPM Package (the run
option is grayed out when the armv7hl target is chosen) . So I headed to the
"Projects" tab and checked the steps the SDK runs when building or running.
Apparently the SDK runs a "mb2 rpm" command/step when running, so I simply
added that step to the build process with "Custom Build Step". Unfortunately
that didn't work, because I'm now getting:
p, li { white-space: pre-wrap; } "18:35:34: Could not start process "mb2 rpm" "
however there were no problems with the makeing: " p, li { white-space:
pre-wrap; } "The process
"$HOME/.config/SailfishAlpha3/mer-sdk-tools/MerSDK/SailfishOS-armv7hl/make"
exited normally."
So how can I build armv7hl RPMs for a Jolla Device?
Kind Regards,
Superpelican
---- On Fri, 13 Dec 2013 11:09:26 -0800 Juha Kallioinen
<juha.kallioi...@jolla.com> wrote ----
On 13.12.2013 20:02, superpelican wrote:
12192051540.946002420813249...@zoho.com" type="cite">
Hello,
I just completely removed my old SDK with the SDK Maintenance tool (and also
removed $HOME/.scratchbox2 as the installer of the new SDK version suggested, I
also removed the Mer SDK VM and Emulator VM of the old SDK version in the
Virtualbox Manager) and installed the new 1312 SDK. When I tried to build my
simple, little multiplication tables practising application Quick Clamshell it
failed with the following messages in the Compile Output pane:
Hi, did this build in the previous "1310" release of the SDK?
The application seems to use the "old way" of specifying a
sailfishapplication, since it doesn't use libsailfishapp, which is the new
(since 1310 installer) and recommended way of creating applications for
Sailfish OS.
Before trying to build your project with "1312" be sure to clean all previous
build results from the project directory. Your bitbucket repository has lots of
build generated files (like the application binary) that should not be there.
....
12192051540.946002420813249...@zoho.com" type="cite"> + QT_SELECT=5
+ make install INSTALL_ROOT=/home/deploy/installroot
install -m 755 -p "Quick2Clamshell"
"/home/deploy/installroot/usr/bin/Quick2Clamshell"
: "/home/deploy/installroot/usr/bin/Quick2Clamshell"
install -m 755 -p
/home/mersdk/Coding/ClamshellSailfish/Quick2Clamshell/main.qml
/home/deploy/installroot/usr/share/Quick2Clamshell/
: /home/deploy/installroot/usr/share/Quick2Clamshell/main.qml
cp -f -R /home/mersdk/Coding/ClamshellSailfish/Quick2Clamshell/pages
/home/deploy/installroot/usr/share/Quick2Clamshell/
cp -f -R /home/mersdk/Coding/ClamshellSailfish/Quick2Clamshell/cover
/home/deploy/installroot/usr/share/Quick2Clamshell/
install -m 755 -p
/home/mersdk/Coding/ClamshellSailfish/Quick2Clamshell/main.qml
/home/deploy/installroot/usr/share/Quick2Clamshell/
: /home/deploy/installroot/usr/share/Quick2Clamshell/main.qml
install -m 755 -p
/home/mersdk/Coding/ClamshellSailfish/Quick2Clamshell/Quick2Clamshell.desktop
/home/deploy/installroot/usr/share/applications/
: /home/deploy/installroot/usr/share/applications/Quick2Clamshell.desktop
+ /usr/lib/rpm/find-debuginfo.sh --strict-build-id
/home/mersdk/Coding/ClamshellSailfish/build-Quick2Clamshell-MerSDK_SailfishOS_i486_x86-Release/
...
12192051540.946002420813249...@zoho.com" type="cite">
Processing files: Quick2Clamshell-0.1-1.i586
error:
File not found: /home/deploy/installroot/icons
That "File not found" is the initial problem.
12192051540.946002420813249...@zoho.com" type="cite">
RPM build errors:
error:
File not found: /home/deploy/installroot/images
error:
File not found: /home/deploy/installroot/usr/share/Quick2Clamshell/images
File not found: /home/deploy/installroot/icons
File not found: /home/deploy/installroot/images
File not found: /home/deploy/installroot/usr/share/Quick2Clamshell/images
Looking at the make install output from earlier in the log, we can see that
the /icons and /images directories are not installed, leading to the initial
problem.
The output below comes just because the build engine tries to copy files to
the emulator, but there are no files it can find because the build failed
already. The build/deploy process should have ended to the RPM build errors and
seems like something to fix in future SDK releases.
12192051540.946002420813249...@zoho.com" type="cite"> receiving incremental
file list
sent 8 bytes received 87 bytes 190.00 bytes/sec
total size is 0 speedup is 0.00
rsync: change_dir "/home/nemo/RPMS" failed: No such file or directory (2)
rsync error: some files/attrs were not transferred (see previous errors) (code
23) at main.c(1637) [Receiver=3.1.0]
rsync: [Receiver] write error: Broken pipe (32)
Command failed: A filename to install is required
18:41:38: The process
"$HOME/.config/SailfishAlpha3/mer-sdk-tools/MerSDK/SailfishOS-i486-x86/deploy"
exited with code 3.
Error while building/deploying project Quick2Clamshell (kit:
MerSDK-SailfishOS-i486-x86)
When executing step 'Rpm'
18:41:38: Elapsed time: 00:06.
"
....
12192051540.946002420813249...@zoho.com" type="cite"> I believe this isn't
related to my app, but rather a problem with the new SDK, so I thought I'd post
it on the ML ;)
There is something incorrect in the way you have specified the RPM packaging
for your application. Looking at your .yaml file, its files section specifies
that /images and /icons should be added to the RPM package. That means images
and icons directories in the root of the filesystem. I'm sure you don't really
want them to be there, but somewhere under /usr/share/applicationname instead.
Please take a look at the following links, which [1] describe what kind of
requirements there are for an application you might want to ship to the Harbour
one day and [2] in detail describe creating an installation package (RPM) for
your application.
[1] https://harbour.jolla.com/faq
[2] https://sailfishos.org/develop-packaging-apps.html
Also, take a while to study the latest application template "File->New
Project" and the example and tutorial applications that come with the "1312"
SDK to see how to use libsailfishapp in your application.
12192051540.946002420813249...@zoho.com" type="cite"> Kind Regards,
Superpelican
P.S.:Someone I know already received her Jolla today, so I had the opportunity
to try it out already before my phone arrives soon :)
It is absolutely awesome! Congratulations on this great product! Within 20
minutes the swipe-based UI felt like a second nature, while I have never used a
N9 or BB10 device!
I have only watched a lot of videos ;)
Glad to hear that! :-) I hope you can figure out the packaging issues with
your app.
For a more real-time discussion with other developers, feel free to join
#sailfishos irc channel in Freenode.
Best regards,
Juha
_______________________________________________
SailfishOS.org Devel mailing list
_______________________________________________
SailfishOS.org Devel mailing list
