On 04/04/2011 10:55 AM, Przemek Klosowski wrote:
On 04/03/2011 06:04 PM, Steve Clark wrote:
I am trying to use preupgrade a fedora 13 system to fedora 14. When I
reboot the system just
hangs.
The hardware is a Jetway MB with an intel D510 cpu and 2 GB of memory
sata drive.
All I see on reboot is a blinking cursor in the upper left corner of the
screen.
I have to ctl-alt-del to get out of the hang.
It looks like it stopped booting, so either your boot environment got
damaged or the F14 kernel fails on your machine. Does the Fedora 14
Live CD boot successfully for you? Do you have enough space in the /boot
partition? Can you boot the Live CD, spacebar into the grub menu and try
booting off the local hard disk?
Haven't tried live cd - don't have a dvd/cd drive on the box. Plenty of room in
the /boot
partition.
/dev/sda1 485M 246M 214M 54% /boot
Grub comes up of the hard disk just fine. If I select thetitle Upgrade to
Fedora 14 (Laughlin)
kernel /boot/upgrade/vmlinuz preupgrade
repo=hd::/var/cache/yum/preupgrade ks=hd:/dev/sda1/upgrade/ks.cfg
stage2=hd:/dev/sda1/upgrade/install.img
initrd /boot/upgrade/initrd.img
I just get a flashing cursor in the top left corner of the screen. I can then
ctl-alt-del and select the f13 kernel from grub and the
system will boot back into f13.
lspci
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge (rev 02)
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated
Graphics Controller (rev 02)
00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics
Controller (rev 02)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio
Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev
02)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev
02)
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev
02)
00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller
#1 (rev 02)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller
#2 (rev 02)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller
#3 (rev 02)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller
#4 (rev 02)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller
(rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation N10/ICH7 Family SATA AHCI Controller
(rev 02)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI
Express Gigabit Ethernet controller (rev 03)
02:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA
Controller (rev 02)
02:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA
Controller (rev 02)
03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network
Adapter (PCI-Express) (rev 01)
I was hoping maybe there were some options I could add to the kernel line to
make it boot.
--
Stephen Clark
*NetWolves*
Sr. Software Engineer III
Phone: 813-579-3200
Fax: 813-882-0209
Email: steve.cl...@netwolves.com
http://www.netwolves.com
--
devel mailing list
devel@lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/devel
