2011/3/25 Andy Gospodarek <go...@redhat.com> > [...] > Your devices are not showing up because the driver is failing to load. >
That is one strange thing, modprobe didn't report any error and you can see the driver in the lsmod list. > Erroe -15 is IXGBE_ERR_RESET_FAILED, so it seems there is either > something wrong with your cards of you are hitting a driver bug. > >From time to time the card come up (after changes in /etc/udev/rules.d/70-*net*) and I get errors like: [ 234.127257] ixgbe: eth2: ixgbe_disable_rx_queue: RXDCTL.ENABLE on Rx queue 0 not cleared within the polling period [ 234.132529] ixgbe: eth2: ixgbe_disable_rx_queue: RXDCTL.ENABLE on Rx queue 1 not cleared within the polling period [ 234.136400] ixgbe: eth2: ixgbe_disable_rx_queue: RXDCTL.ENABLE on Rx queue 2 not cleared within the polling period [ 234.140396] ixgbe: eth2: ixgbe_disable_rx_queue: RXDCTL.ENABLE on Rx queue 3 not cleared within the polling period [ 234.144402] ixgbe: eth2: ixgbe_disable_rx_queue: RXDCTL.ENABLE on Rx queue 4 not cleared within the polling period [ 234.148405] ixgbe: eth2: ixgbe_disable_rx_queue: RXDCTL.ENABLE on Rx queue 5 not cleared within the polling period [ 234.152408] ixgbe: eth2: ixgbe_disable_rx_queue: RXDCTL.ENABLE on Rx queue 6 not cleared within the polling period [ 234.156408] ixgbe: eth2: ixgbe_disable_rx_queue: RXDCTL.ENABLE on Rx queue 7 not cleared within the polling period [ 234.212147] ixgbe: eth2: ixgbe_watchdog_link_is_up: NIC Link is Up 10 Gbps, Flow Control: RX/TX When I try to set an IP adress. You should probably turn on dynamic debugging for the ixgbe module and > see if you can figure out what might be going wrong. A guide for using > dynamic debugging can be found in Documentation/dynamic-debug-howto.txt. > I'm already struggeling with the debugfs, sorry but I need a documentation that a system administrator can understand :). One remark, the error occured with the standard ixgbe module (2.0.62-k2), so I upgraded the module to the latest version (3.2.10-NAPI) but still have the same error. Regards, Thomas
-- devel mailing list devel@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/devel
