I have migrate my home server from Fedora 11 to Fedora 25 with a new installation.
All work fine except the load firmware of the cxacru module (ADSL Modem USB) at boot time, after a poweroff and unplug/plug the AC power cable. If I try reload the modules manually when the server is started I get the same error and the firmware is not loaded. If I disconnect and reconnect modem USB when the server is on, the cxacru module load its firmware without problem and I can load the ppp interface property . This is log message at boot time: > giu 28 09:11:18 igloo.home.solinos.it kernel: rt61pci 0000:05:00.0 wlp5s0: > renamed from wlan0 > giu 28 09:11:18 igloo.home.solinos.it crda[811]: setting regulatory domain to > IT based on timezone (Europe/Rome) > giu 28 09:11:19 igloo.home.solinos.it systemd[1]: Found device > /dev/fedora/multimedia. > giu 28 09:11:19 igloo.home.solinos.it kernel: cxacru 2-1.1:1.0: receive of cm > 0x90 failed (-104) > giu 28 09:11:19 igloo.home.solinos.it kernel: usbcore: registered new > interface driver cxacru > giu 28 09:11:19 igloo.home.solinos.it kernel: cxacru 2-1.1:1.0: found > firmware cxacru-fw.bin > giu 28 09:11:19 igloo.home.solinos.it kernel: cxacru 2-1.1:1.0: loading > firmware > giu 28 09:11:19 igloo.home.solinos.it kernel: cxacru 2-1.1:1.0: Firmware > upload failed: -32 > giu 28 09:11:19 igloo.home.solinos.it kernel: cxacru 2-1.1:1.0: send of cm > 0x90 failed (-32) > giu 28 09:11:19 igloo.home.solinos.it systemd[1]: Found device > /dev/fedora/temp. > giu 28 09:11:19 igloo.home.solinos.it systemd[1]: Found device > /dev/mapper/fedora-var. > giu 28 09:11:19 igloo.home.solinos.it systemd[1]: Found device > /dev/mapper/fedora-home. > giu 28 09:11:19 igloo.home.solinos.it systemd[1]: Found device > /dev/fedora/lv_virt. > giu 28 09:11:20 igloo.home.solinos.it lvm[775]: 9 logical volume(s) in > volume group "fedora" now active > This is log message when all work fine: > giu 28 12:12:57 igloo.home.solinos.it kernel: usbcore: registered new > interface driver cxacru > giu 28 12:12:57 igloo.home.solinos.it kernel: cxacru 2-1.1:1.0: found > firmware cxacru-fw.bin > giu 28 12:12:57 igloo.home.solinos.it kernel: cxacru 2-1.1:1.0: loading > firmware > giu 28 12:12:58 igloo.home.solinos.it kernel: cxacru 2-1.1:1.0: starting > device > giu 28 12:12:59 igloo.home.solinos.it NetworkManager[1055]: <info> > [1498644779.6061] manager: (cxacru0): new ADSL device > (/org/freedesktop/NetworkManager/Devices/4) > giu 28 12:12:59 igloo.home.solinos.it NetworkManager[1055]: <info> > [1498644779.6064] device (cxacru0): state change: unmanaged -> unavailable > (reason 'managed') [10 20 2] > giu 28 12:12:59 igloo.home.solinos.it kernel: cxacru0: ADSL USB MODEM > (usb-0000:00:1d.0-1.1) 00:04:ed:54:e2:53 > giu 28 12:12:59 igloo.home.solinos.it kernel: ATM dev 0: ADSL state: running > giu 28 12:12:59 igloo.home.solinos.it kernel: ATM dev 0: ADSL line: down > giu 28 12:13:03 igloo.home.solinos.it kernel: ATM dev 0: ADSL line: > attempting to activate > giu 28 12:13:05 igloo.home.solinos.it kernel: ATM dev 0: ADSL line: down > giu 28 12:13:07 igloo.home.solinos.it kernel: ATM dev 0: ADSL line: > attempting to activate > giu 28 12:13:09 igloo.home.solinos.it kernel: ATM dev 0: ADSL line: down > giu 28 12:13:11 igloo.home.solinos.it kernel: ATM dev 0: ADSL line: > attempting to activate > giu 28 12:13:19 igloo.home.solinos.it kernel: ATM dev 0: ADSL line: training > giu 28 12:13:21 igloo.home.solinos.it kernel: ATM dev 0: ADSL line: channel > analysis > giu 28 12:13:26 igloo.home.solinos.it kernel: ATM dev 0: ADSL line: up (800 > kb/s down | 320 kb/s up) > giu 28 12:13:29 igloo.home.solinos.it NetworkManager[1055]: <info> > [1498644809.6502] device (cxacru0): link connected > giu 28 12:13:29 igloo.home.solinos.it NetworkManager[1055]: <info> > [1498644809.6505] device (cxacru0): state change: unavailable -> disconnected > (reason 'carrier-changed') [20 30 40] I have do a script to run after boot in order to load cxacru module and ppp0 interface. But I must unplug and reattach manually the usb cable before run this script There is some way (command line) to simulate unplug/plug of Modem USB? Someone have some suggest? Many thanks -- Dario Lesca (inviato dal mio Linux Fedora 25 Workstation) _______________________________________________ devel mailing list -- devel@lists.fedoraproject.org To unsubscribe send an email to devel-le...@lists.fedoraproject.org
