REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4352

Adding support for EFI_CONFORMANCE_PROFILE_TABLE by adding an
associated header file and relevant GUIDs to MdePkg.dec as defined
in the UEFI 2.10 spec.
This table is needed to address changes being made within ShellPkg.

Cc: Michael D Kinney <michael.d.kin...@intel.com>
Cc: Liming Gao <gaolim...@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang....@intel.com>
Signed-off-by: Sam Kaynor <sam.kay...@arm.com>
---

Notes:
    v8:
    - Added copyright information
    - Fixed CI formatting
    v7:
    - Separated out Guids from UEFI and EBBR
    v6:
    - Added patch to address MdePkg changes separately

 MdePkg/MdePkg.dec                         |  4 ++
 MdePkg/Include/Guid/ConformanceProfiles.h | 57 ++++++++++++++++++++
 2 files changed, 61 insertions(+)

diff --git a/MdePkg/MdePkg.dec b/MdePkg/MdePkg.dec
index 94170ff9a4a1..3a9a0fec241e 100644
--- a/MdePkg/MdePkg.dec
+++ b/MdePkg/MdePkg.dec
@@ -751,6 +751,10 @@ [Guids]
   ## Include/Guid/DeviceAuthentication.h
   gEfiDeviceSignatureDatabaseGuid  = { 0xb9c2b4f4, 0xbf5f, 0x462d, {0x8a, 
0xdf, 0xc5, 0xc7, 0xa, 0xc3, 0x5d, 0xad }}
 
+  ## Include/Guid/ConformanceProfiles.h
+  gEfiConfProfilesTableGuid        = { 0x36122546, 0xf7e7, 0x4c8f, { 0xbd, 
0x9b, 0xeb, 0x85, 0x25, 0xb5, 0x0c, 0x0b }}
+  gEfiConfProfilesUefiSpecGuid     = { 0x523c91af, 0xa195, 0x4382, { 0x81, 
0x8d, 0x29, 0x5f, 0xe4, 0x00, 0x64, 0x65 }}
+
   #
   # GUID defined in PI1.0
   #
diff --git a/MdePkg/Include/Guid/ConformanceProfiles.h 
b/MdePkg/Include/Guid/ConformanceProfiles.h
new file mode 100644
index 000000000000..550501123151
--- /dev/null
+++ b/MdePkg/Include/Guid/ConformanceProfiles.h
@@ -0,0 +1,57 @@
+/** @file
+  GUIDs used for UEFI Conformance Profiles Table in the UEFI 2.10 
specification.
+
+  Copyright (c) 2024, Arm Limited. All rights reserved.<BR>
+  SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef CONFORMANCE_PROFILES_TABLE_GUID_H_
+#define CONFORMANCE_PROFILES_TABLE_GUID_H_
+
+//
+// This table allows the platform to advertise its UEFI specification 
conformance
+// in the form of pre-defined profiles. Each profile is identified by a GUID, 
with
+// known profiles listed in the section below.
+// The absence of this table shall indicate that the platform implementation is
+// conformant with the UEFI specification requirements, as defined in Section 
2.6.
+// This is equivalent to publishing this configuration table with the
+// EFI_CONFORMANCE_PROFILES_UEFI_SPEC_GUID conformance profile.
+//
+#define EFI_CONFORMANCE_PROFILES_TABLE_GUID \
+  { \
+    0x36122546, 0xf7e7, 0x4c8f, { 0xbd, 0x9b, 0xeb, 0x85, 0x25, 0xb5, 0x0c, 
0x0b } \
+  }
+
+#pragma pack(1)
+
+typedef struct {
+  ///
+  /// Version of the table must be 0x1
+  ///
+  UINT16    Version;
+  ///
+  /// The number of profiles GUIDs present in ConformanceProfiles
+  ///
+  UINT16    NumberOfProfiles;
+  ///
+  /// An array of conformance profile GUIDs that are supported by this system.
+  /// EFI_GUID        ConformanceProfiles[];
+  ///
+} EFI_CONFORMANCE_PROFILES_TABLE;
+
+#pragma pack()
+
+#define EFI_CONFORMANCE_PROFILES_TABLE_VERSION  0x1
+
+//
+// GUID defined in spec.
+//
+#define EFI_CONFORMANCE_PROFILES_UEFI_SPEC_GUID \
+    { 0x523c91af, 0xa195, 0x4382, \
+    { 0x81, 0x8d, 0x29, 0x5f, 0xe4, 0x00, 0x64, 0x65 }}
+
+extern EFI_GUID  gEfiConfProfilesTableGuid;
+extern EFI_GUID  gEfiConfProfilesUefiSpecGuid;
+
+#endif
-- 
2.34.1

Reply via email to