-----Original Message-----
From: Mike Maslenkin <mike.maslen...@gmail.com>
Sent: Wednesday, November 15, 2023 2:26 PM
To: Igor Kulchytskyy <ig...@ami.com>
Cc: Leif Lindholm <quic_llind...@quicinc.com>; devel@edk2.groups.io; Abner
Chang <abner.ch...@amd.com>; Nickle Wang <nick...@nvidia.com>
Subject: Re: [EXTERNAL] Re: [edk2-devel] [PATCH v5 2/2] RedfishPkg:
RedfishDiscoverDxe: Optimize the Redfish Discover flow
Hi Igor,
On Wed, Nov 15, 2023 at 9:37 PM Igor Kulchytskyy <ig...@ami.com> wrote:
>
> Hi Mike,
> My implementation of checking the IpType supposed to be like this:
> /**
> Check if Network Protocol Type matches with SMBIOS Type 42 IP Address Type.
>
> @param[in] NetworkProtocolType The Network Protocol Type to check with.
> @param[in] IpType The Host IP Address Type from SMBIOS Type
> 42.
> **/
> STATIC
> BOOLEAN
> IsTcpTypeMatch (
> IN UINT32 NetworkProtocolType,
NetworkProtocolType has defined type -
NETWORK_INTERFACE_PROTOCOL_TYPE, why don't you use it.
Ah. I see it is declared as UINT32 in REDFISH_DISCOVER_REQUIRED_PROTOCOL... Ok.
It's not clear why, because it is internal structure.
> IN UINT8 IpType
> )
> {
> if ((NetworkProtocolType == ProtocolTypeTcp4) && (IpType ==
> REDFISH_HOST_INTERFACE_HOST_IP_ADDRESS_FORMAT_IP4)) {
> return TRUE;
> }
> if ((NetworkProtocolType == ProtocolTypeTcp6) && (IpType ==
> REDFISH_HOST_INTERFACE_HOST_IP_ADDRESS_FORMAT_IP6)) {
> return TRUE;
> }
> return FALSE;
> }
>
> And then in BuildupNetworkInterface function.
>
> // Get IP Type to filter out unnecessary network protocol if possible
> IpType = GetHiIpProtocolType ();
>
> for (Index = 0; Index < ListCount; Index++) {
> // Check IP Type and skip an unnecessary network protocol if does not
> match
> if (!IsTcpTypeMatch (mRequiredProtocol[Index].ProtocolType, IpType)) {
> continue;
> }
So, where is REDFISH_HOST_INTERFACE_HOST_IP_ADDRESS_FORMAT_UNKNOWN handled now?
If IpType == REDFISH_HOST_INTERFACE_HOST_IP_ADDRESS_FORMAT_UNKNOWN
IsTcpTypeMatch() always returns FALSE,
so !IsTcpTypeMatch() gives TRUE and we skip this iteration.
Effectively this means
if (IpType == REDFISH_HOST_INTERFACE_HOST_IP_ADDRESS_FORMAT_UNKNOWN ) {
return EFI_DEVICE_ERROR
}
Just because there is nothing after this loop.
And this is not what we wanted, and recognized as my mistake previously.
Igor:
Agree. We did recognize it as mistake. My fault.
Lets stick with your version and see what Leif say.
>
> -----Original Message-----
> From: Mike Maslenkin <mike.maslen...@gmail.com>
> Sent: Wednesday, November 15, 2023 1:27 PM
> To: Igor Kulchytskyy <ig...@ami.com>
> Cc: Leif Lindholm <quic_llind...@quicinc.com>; devel@edk2.groups.io; Abner
> Chang <abner.ch...@amd.com>; Nickle Wang <nick...@nvidia.com>
> Subject: Re: [EXTERNAL] Re: [edk2-devel] [PATCH v5 2/2] RedfishPkg:
> RedfishDiscoverDxe: Optimize the Redfish Discover flow
>
> On Wed, Nov 15, 2023 at 4:52 PM Igor Kulchytskyy <ig...@ami.com> wrote:
> >
> > Hello Leif and Mike,
> > Let me try to explain the idea of the filtering IP.
> > That filtering should work only if we know exactly that IP is IPv4 or IPv6
> > in SMBIOS Type 42.
> Hm. I've already composed a reply below, but then a returned to this
> statement...
>
> Is this a difference in condition between v3 and v5? I came to the
> conclusion that at the place we are discussing
> SMBIOS table 42h can be absent because
> PlatformHostInterfaceInformationReady hasn't been called yet,
> so REDFISH_HOST_INTERFACE_HOST_IP_ADDRESS_FORMAT_UNKNOWN is expected.
>
>
> > And it just helping to reduce the work in case we know the exact type of
> > IP, which supposed to be used in BIOS BMC communication.
> > In that case there is no need to build network interface for the unused IP
> > Type.
> > On some systems IP address could be dynamic and we will not be able to know
> > the version of IP from SMBIOS.
> > If you see I check HostIpAssignmentType in GetHiIpProtocolType function.
> > And return IP type UNKNOWN if it is not static.
> > If we get an unknown IP type, we should not return from
> > BuildupNetworkInterface function, but just proceed and build the network
> > interface for all IPs.
> > So, later Redfish Discover driver can find the right one.
> > Based on this logic I'm going to prepare the patch v6.
> > Thank you,
> > Igor
>
> Agree.. I was focused on edk2 implementation of
> RedfishPlatformHostInterfaceLib and PlatformHostInterfaceBmcUsbNicLib
> where HostIpAddressFormat is specified (hardcoded). I guess
> HostIpAddressFormat as well as SMBIOS table 42h must be available
> by the time RedfishServiceAcquireService()->DiscoverRedfishHostInterface()
> call, while it might be not available at the moment
> RedfishDiscoverDriverBindingStart()->BuildupNetworkInterface(). So,
> condition from v3 looks correct to me.
>
> My main concern was introduction of defines. Those don't look great.
> Those are huge (it even doesn't fit into the screen) and misleading a
> bit.
> For example:
> +#define MAC_COMPARE(ThisNetworkInterface, TargetNetworkInterface)
> (CompareMem ((VOID *)&ThisNetworkInterface->MacAddress,
> &TargetNetworkInterface->MacAddress,
> ThisNetworkInterface->HwAddressSize))
>
> The proposed variant is equal to #define MAC_COMPARE(A, B)
> (CompareMem ((VOID *)&ThisNetworkInterface->MacAddress,
> &TargetNetworkInterface->MacAddress,
> ThisNetworkInterface->HwAddressSize)), i.e a bit useless.
>
> I would expect it could be declared at least as:
> #define MAC_COMPARE(This, Target) CompareMem ((VOID
> *)&(This)->MacAddress, &(Target)->MacAddress, (This)->HwAddressSize)
> I.e define should really replace some arguments also reducing the line
> length.
>
> BTW: there is a place in ValidateTargetNetworkInterface() where
> CompareMem can be replaced with MAC_COMPARE too.
>
> Also, I found IP6_LINK_EQUAL(Mac1, Mac2) define, that is unused in
> edk2. But according to that one, please consider moving "== 0" check
> to #define declaration.
> But I do not think this macro is required at all, because there are 5
> MAC compares left in this module. So, it just brings some
> inconsistency.
>
> Agreed that static helper function would be the best.
>
> Leif, do you expect something like this?
> STATIC
> BOOLEAN
> FilterInterface (
> IN NETWORK_INTERFACE_PROTOCOL_TYPE ProtocolType,
> IN UINT8 HostIpAddressFormat
> )
> {
> // This is based on v5, but according to the comments above
> // v3 is correct as it allows
> REDFISH_HOST_INTERFACE_HOST_IP_ADDRESS_FORMAT_UNKNOWN
>
> if (ProtocolType == ProtocolTypeTcp4) {
> return IpType != REDFISH_HOST_INTERFACE_HOST_IP_ADDRESS_FORMAT_IP4;
> } else if (ProtocolType == ProtocolTypeTcp6) {
> return IpType != REDFISH_HOST_INTERFACE_HOST_IP_ADDRESS_FORMAT_IP6;
> }
> return false;
> }
>
> and then::
>
> // Get IP Type to filter out unnecessary network protocol if possible
> IpType = GetHiIpProtocolType ();
>
> for (Index = 0; Index < ListCount; Index++) {
> // Check IP Type and skip an unnecessary network protocol if does not match
> if (FilterInterface (gRequiredProtocol[Index].ProtocolType, IpType)) {
> continue;
> }
>
> Regards,
> Mike.
> -The information contained in this message may be confidential and
> proprietary to American Megatrends (AMI). This communication is intended to
> be read only by the individual or entity to whom it is addressed or by their
> designee. If the reader of this message is not the intended recipient, you
> are on notice that any distribution of this message, in any form, is strictly
> prohibited. Please promptly notify the sender by reply e-mail or by telephone
> at 770-246-8600, and then delete or destroy all copies of the transmission.
-The information contained in this message may be confidential and proprietary
to American Megatrends (AMI). This communication is intended to be read only by
the individual or entity to whom it is addressed or by their designee. If the
reader of this message is not the intended recipient, you are on notice that
any distribution of this message, in any form, is strictly prohibited. Please
promptly notify the sender by reply e-mail or by telephone at 770-246-8600, and
then delete or destroy all copies of the transmission.
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#111291): https://edk2.groups.io/g/devel/message/111291
Mute This Topic: https://groups.io/mt/102584140/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
