Reviewed-by: Zhichao Gao <zhichao....@intel.com>
Thanks,
Zhichao
> -----Original Message-----
> From: Page Chen <paiching_c...@apple.com>
> Sent: Friday, November 10, 2023 3:27 AM
> To: devel@edk2.groups.io
> Cc: Page Chen <paiching_c...@apple.com>; Gao, Zhichao
> <zhichao....@intel.com>; Andrew Fish <af...@apple.com>
> Subject: [PATCH v2 1/1] ShellPkg: Fix typos
>
> begining->beginning
> dirve->drive
> duplicat->duplicate
> fuly->fully
> Funciton->Function
> Functino->Function
> optioanl->optional
> poitners->pointers
> rountine->routine
> sucessful->successful
> sucessfully->successfully
>
> Signed-off-by: Page Chen <paiching_c...@apple.com>
> Cc: Zhichao Gao <zhichao....@intel.com>
> Cc: Andrew Fish <af...@apple.com>
> ---
> .../HttpDynamicCommand/HttpApp.c | 2 +-
> .../HttpDynamicCommand/HttpDynamicCommand.c | 4 +-
> ShellPkg/Include/Library/BcfgCommandLib.h | 2 +-
> ShellPkg/Include/Library/HandleParsingLib.h | 2 +-
> ShellPkg/Include/Library/ShellCommandLib.h | 6 +--
> ShellPkg/Include/Library/ShellLib.h | 30 +++++++-------
> .../Include/Protocol/EfiShellEnvironment2.h | 10 ++---
> .../UefiHandleParsingLib.c | 16 ++++----
> .../UefiShellBcfgCommandLib.c | 20 +++++-----
> .../UefiShellCommandLib/UefiShellCommandLib.c | 6 +--
> .../UefiShellDebug1CommandsLib/Compress.c | 2 +-
> .../UefiShellDebug1CommandsLib/Compress.h | 2 +-
> .../UefiShellDebug1CommandsLib.c | 2 +-
> .../UefiShellDriver1CommandsLib.c | 2 +-
> .../UefiShellInstall1CommandsLib.c | 2 +-
> .../UefiShellLevel1CommandsLib.c | 4 +-
> .../UefiShellLevel1CommandsLib.h | 2 +-
> .../Library/UefiShellLevel2CommandsLib/Cd.c | 4 +-
> .../Library/UefiShellLevel2CommandsLib/Ls.c | 2 +-
> .../Library/UefiShellLevel2CommandsLib/Map.c | 2 +-
> .../Library/UefiShellLevel2CommandsLib/Mv.c | 6 +--
> .../Library/UefiShellLevel2CommandsLib/Set.c | 2 +-
> .../UefiShellLevel2CommandsLib.c | 8 ++--
> .../UefiShellLevel2CommandsLib.h | 6 +--
> .../Library/UefiShellLevel2CommandsLib/Vol.c | 2 +-
> .../UefiShellLevel3CommandsLib/Alias.c | 4 +-
> .../UefiShellLevel3CommandsLib/Touch.c | 4 +-
> .../Library/UefiShellLevel3CommandsLib/Type.c | 4 +-
> .../UefiShellLevel3CommandsLib.c | 2 +-
> ShellPkg/Library/UefiShellLib/UefiShellLib.c | 40 +++++++++----------
> .../UefiShellNetwork1CommandsLib/Ping.c | 2 +-
> .../UefiShellNetwork1CommandsLib.c | 2 +-
> .../UefiShellNetwork2CommandsLib/Ping6.c | 2 +-
> .../UefiShellNetwork2CommandsLib.c | 2 +-
> 34 files changed, 104 insertions(+), 104 deletions(-)
>
> diff --git a/ShellPkg/DynamicCommand/HttpDynamicCommand/HttpApp.c
> b/ShellPkg/DynamicCommand/HttpDynamicCommand/HttpApp.c
> index 6622e058aab6..ea41417fc3d6 100644
> --- a/ShellPkg/DynamicCommand/HttpDynamicCommand/HttpApp.c
> +++ b/ShellPkg/DynamicCommand/HttpDynamicCommand/HttpApp.c
> @@ -28,7 +28,7 @@ EFI_STRING_ID mStringHelpTokenId = STRING_TOKEN
> (STR_GET_HELP_HTTP);
> @param ImageHandle The image handle of the process.
>
> @param SystemTable The EFI System Table pointer.
>
>
>
> - @retval EFI_SUCCESS Http command is executed sucessfully.
>
> + @retval EFI_SUCCESS Http command is executed successfully.
>
> @retval EFI_ABORTED HII package was failed to initialize.
>
> @retval others Other errors when executing http command.
>
> **/
>
> diff --git
> a/ShellPkg/DynamicCommand/HttpDynamicCommand/HttpDynamicComma
> nd.c
> b/ShellPkg/DynamicCommand/HttpDynamicCommand/HttpDynamicComma
> nd.c
> index 45aeaac347ad..d3c384dc8b8a 100644
> ---
> a/ShellPkg/DynamicCommand/HttpDynamicCommand/HttpDynamicComma
> nd.c
> +++
> b/ShellPkg/DynamicCommand/HttpDynamicCommand/HttpDynamicComma
> nd.c
> @@ -22,7 +22,7 @@
> @param[in] Shell The instance of the shell protocol used in
>
> the context of processing this command.
>
>
>
> - @return EFI_SUCCESS the operation was sucessful
>
> + @return EFI_SUCCESS the operation was successful
>
> @return other the operation failed.
>
> **/
>
> SHELL_STATUS
>
> @@ -78,7 +78,7 @@ EFI_SHELL_DYNAMIC_COMMAND_PROTOCOL
> mHttpDynamicCommand = {
> @param ImageHandle The image handle of the process.
>
> @param SystemTable The EFI System Table pointer.
>
>
>
> - @retval EFI_SUCCESS Http command is executed sucessfully.
>
> + @retval EFI_SUCCESS Http command is executed successfully.
>
> @retval EFI_ABORTED HII package was failed to initialize.
>
> @retval others Other errors when executing http command.
>
> **/
>
> diff --git a/ShellPkg/Include/Library/BcfgCommandLib.h
> b/ShellPkg/Include/Library/BcfgCommandLib.h
> index ec5579ce614a..649fe00f98a2 100644
> --- a/ShellPkg/Include/Library/BcfgCommandLib.h
> +++ b/ShellPkg/Include/Library/BcfgCommandLib.h
> @@ -18,7 +18,7 @@
> @param[in] SystemTable the EFI System Table pointer
>
> @param[in] Name the profile name to use
>
>
>
> - @retval EFI_SUCCESS the shell command handlers were installed
> sucessfully
>
> + @retval EFI_SUCCESS the shell command handlers were installed
> successfully
>
> @retval EFI_UNSUPPORTED the shell level required was not found.
>
> **/
>
> EFI_STATUS
>
> diff --git a/ShellPkg/Include/Library/HandleParsingLib.h
> b/ShellPkg/Include/Library/HandleParsingLib.h
> index 8193be94a478..b86d69cb0ef5 100644
> --- a/ShellPkg/Include/Library/HandleParsingLib.h
> +++ b/ShellPkg/Include/Library/HandleParsingLib.h
> @@ -20,7 +20,7 @@
> @param[in] TheName The Guid's name
>
> @param[in] Lang RFC4646 language code list or NULL
>
>
>
> - @retval EFI_SUCCESS The operation was sucessful
>
> + @retval EFI_SUCCESS The operation was successful
>
> @retval EFI_ACCESS_DENIED There was a duplicate
>
> @retval EFI_OUT_OF_RESOURCES A memory allocation failed
>
> **/
>
> diff --git a/ShellPkg/Include/Library/ShellCommandLib.h
> b/ShellPkg/Include/Library/ShellCommandLib.h
> index 7a97b203f1ff..0b185e3e5781 100644
> --- a/ShellPkg/Include/Library/ShellCommandLib.h
> +++ b/ShellPkg/Include/Library/ShellCommandLib.h
> @@ -70,7 +70,7 @@ CONST CHAR16 *
> the command built into shell.
>
> @param[in] SystemTable The pointer to the system table.
>
>
>
> - @retval RETURN_SUCCESS The shell command was sucessful.
>
> + @retval RETURN_SUCCESS The shell command was successful.
>
> @retval RETURN_UNSUPPORTED The command is not supported.
>
> **/
>
> typedef
>
> @@ -544,7 +544,7 @@ ShellCommandFindMapItem (
> @param[in] Flags The Flags attribute for this map item.
>
> @param[in] Path TRUE to update path, FALSE to skip this step
> (should only be TRUE during initialization).
>
>
>
> - @retval EFI_SUCCESS The addition was sucessful.
>
> + @retval EFI_SUCCESS The addition was successful.
>
> @retval EFI_OUT_OF_RESOURCES A memory allocation failed.
>
> @retval EFI_INVALID_PARAMETER A parameter was invalid.
>
> **/
>
> @@ -563,7 +563,7 @@ ShellCommandAddMapItemAndUpdatePath (
>
>
> Also sets up the default path environment variable if Type is FileSystem.
>
>
>
> - @retval EFI_SUCCESS All map names were created sucessfully.
>
> + @retval EFI_SUCCESS All map names were created successfully.
>
> @retval EFI_NOT_FOUND No protocols were found in the system.
>
> @return Error returned from gBS->LocateHandle().
>
>
>
> diff --git a/ShellPkg/Include/Library/ShellLib.h
> b/ShellPkg/Include/Library/ShellLib.h
> index 10cf7f4fefe0..f41bc4851c57 100644
> --- a/ShellPkg/Include/Library/ShellLib.h
> +++ b/ShellPkg/Include/Library/ShellLib.h
> @@ -300,7 +300,7 @@ ShellWriteFile (
>
>
> @param[in] FileHandle The file handle to close.
>
>
>
> - @retval EFI_SUCCESS The file handle was closed sucessfully.
>
> + @retval EFI_SUCCESS The file handle was closed successfully.
>
> @retval INVALID_PARAMETER One of the parameters has an invalid
> value.
>
> **/
>
> EFI_STATUS
>
> @@ -318,7 +318,7 @@ ShellCloseFile (
>
>
> @param[in] FileHandle The file handle to delete.
>
>
>
> - @retval EFI_SUCCESS The file was closed sucessfully.
>
> + @retval EFI_SUCCESS The file was closed successfully.
>
> @retval EFI_WARN_DELETE_FAILURE The handle was closed, but the file
> was not
>
> deleted.
>
> @retval INVALID_PARAMETER One of the parameters has an invalid
> value.
>
> @@ -342,9 +342,9 @@ ShellDeleteFile (
>
>
> @param[in] FileHandle The file handle on which the position is
> being
> set.
>
>
>
> - @param[in] Position The byte position from the begining of the
> file.
>
> + @param[in] Position The byte position from the beginning of the
> file.
>
>
>
> - @retval EFI_SUCCESS Operation completed sucessfully.
>
> + @retval EFI_SUCCESS Operation completed successfully.
>
> @retval EFI_UNSUPPORTED The seek request for non-zero is not valid
> on
>
> directories.
>
> @retval INVALID_PARAMETER One of the parameters has an invalid value.
>
> @@ -365,9 +365,9 @@ ShellSetFilePosition (
> if FileHandle is a directory.
>
>
>
> @param[in] FileHandle The open file handle on which to get the
> position.
>
> - @param[out] Position The byte position from the begining of the
> file.
>
> + @param[out] Position The byte position from the beginning of the
> file.
>
>
>
> - @retval EFI_SUCCESS The operation completed sucessfully.
>
> + @retval EFI_SUCCESS The operation completed successfully.
>
> @retval INVALID_PARAMETER One of the parameters has an invalid value.
>
> @retval EFI_UNSUPPORTED The request is not valid on directories.
>
> **/
>
> @@ -466,7 +466,7 @@ ShellFindNextFile (
> @param[in] FileHandle The file handle from which size is retrieved.
>
> @param[out] Size The pointer to size.
>
>
>
> - @retval EFI_SUCCESS The operation was completed sucessfully.
>
> + @retval EFI_SUCCESS The operation was completed successfully.
>
> @retval EFI_DEVICE_ERROR Cannot access the file.
>
> **/
>
> EFI_STATUS
>
> @@ -524,7 +524,7 @@ ShellGetEnvironmentVariable (
> @param[in] EnvVal The Value of the environment variable
>
> @param[in] Volatile Indicates whether the variable is
> non-volatile
> (FALSE) or volatile (TRUE).
>
>
>
> - @retval EFI_SUCCESS The operation completed sucessfully
>
> + @retval EFI_SUCCESS The operation completed successfully
>
> @retval EFI_UNSUPPORTED This operation is not allowed in pre-UEFI 2.0
> Shell environments.
>
> **/
>
> EFI_STATUS
>
> @@ -559,7 +559,7 @@ ShellSetEnvironmentVariable (
> in the form "x=y". If NULL, the current
> set is used.
>
> @param[out] Status The status of the run command line.
>
>
>
> - @retval EFI_SUCCESS The operation completed sucessfully.
> Status
>
> + @retval EFI_SUCCESS The operation completed successfully.
> Status
>
> contains the status code returned.
>
> @retval EFI_INVALID_PARAMETER A parameter contains an invalid value.
>
> @retval EFI_OUT_OF_RESOURCES Out of resources.
>
> @@ -626,7 +626,7 @@ ShellSetPageBreakMode (
> @param[in] OpenMode Mode to open files with.
>
> @param[in, out] ListHead Head of linked list of results.
>
>
>
> - @retval EFI_SUCCESS The operation was sucessful and the list head
>
> + @retval EFI_SUCCESS The operation was successful and the list
> head
>
> contains the list of opened files.
>
> @retval != EFI_SUCCESS The operation failed.
>
>
>
> @@ -645,7 +645,7 @@ ShellOpenFileMetaArg (
>
>
> @param[in, out] ListHead The pointer to free.
>
>
>
> - @retval EFI_SUCCESS The operation was sucessful.
>
> + @retval EFI_SUCCESS The operation was successful.
>
> @retval EFI_INVALID_PARAMETER A parameter was invalid.
>
> **/
>
> EFI_STATUS
>
> @@ -730,7 +730,7 @@ extern SHELL_PARAM_ITEM SfoParamList[];
> @param[in] AutoPageBreak Will automatically set PageBreakEnabled.
>
> @param[in] AlwaysAllowNumbers Will never fail for number based flags.
>
>
>
> - @retval EFI_SUCCESS The operation completed sucessfully.
>
> + @retval EFI_SUCCESS The operation completed successfully.
>
> @retval EFI_OUT_OF_RESOURCES A memory allocation failed.
>
> @retval EFI_INVALID_PARAMETER A parameter was invalid.
>
> @retval EFI_VOLUME_CORRUPTED The command line was corrupt.
>
> @@ -878,7 +878,7 @@ ShellCommandLineCheckDuplicate (
>
>
> This function is intended for internal access for shell commands only.
>
>
>
> - @retval EFI_SUCCESS The initialization was complete sucessfully.
>
> + @retval EFI_SUCCESS The initialization was complete successfully.
>
>
>
> **/
>
> EFI_STATUS
>
> @@ -1249,7 +1249,7 @@ ShellPromptForResponse (
> @param[in] HiiFormatHandle The format string Handle for getting from
> Hii.
>
> @param[in, out] Response The pointer to Response, which will be
> populated upon return.
>
>
>
> - @retval EFI_SUCCESS The operation was sucessful.
>
> + @retval EFI_SUCCESS The operation was successful.
>
> @return other The operation failed.
>
>
>
> @sa ShellPromptForResponse
>
> @@ -1385,7 +1385,7 @@ ShellFileHandleReadLine (
>
>
> @param[in] FileName Pointer to file name to delete.
>
>
>
> - @retval EFI_SUCCESS the file was deleted sucessfully
>
> + @retval EFI_SUCCESS the file was deleted successfully
>
> @retval EFI_WARN_DELETE_FAILURE the handle was closed, but the file
> was not
>
> deleted
>
> @retval EFI_INVALID_PARAMETER One of the parameters has an invalid
> value.
>
> diff --git a/ShellPkg/Include/Protocol/EfiShellEnvironment2.h
> b/ShellPkg/Include/Protocol/EfiShellEnvironment2.h
> index 8b7c86dc24fc..2f826be070fa 100644
> --- a/ShellPkg/Include/Protocol/EfiShellEnvironment2.h
> +++ b/ShellPkg/Include/Protocol/EfiShellEnvironment2.h
> @@ -507,7 +507,7 @@ VOID
> This must be called after INIT_HANDLE_ENUMERATOR and before
> CLOSE_HANDLE_ENUMERATOR.
>
>
>
> @param[in, out] Handle The pointer to pointer to Handle. It is set
>
> - on a sucessful return.
>
> + on a successful return.
>
>
>
> @retval EFI_SUCCESS The next handle in the handle database is
> *Handle.
>
> @retval EFI_NOT_FOUND There is not another handle.
>
> @@ -652,7 +652,7 @@ VOID
>
>
> @param[in, out] ProtocolInfo The pointer to pointer to protocol
> information structure.
>
>
>
> - @retval EFI_SUCCESS The next protocol's information was
> sucessfully
> returned.
>
> + @retval EFI_SUCCESS The next protocol's information was
> successfully returned.
>
> @retval NULL There are no more protocols.
>
> **/
>
> typedef
>
> @@ -684,7 +684,7 @@ EFI_STATUS
> called after INIT_PROTOCOL_INFO_ENUMERATOR.
>
>
>
> This function resets the list of protocols such that the next one in the
>
> - list is the begining of the list.
>
> + list is the beginning of the list.
>
> **/
>
> typedef
>
> VOID
>
> @@ -809,7 +809,7 @@ EFI_DEVICE_PATH_PROTOCOL *
>
>
> This function looks through the shell environment map for a map whose
> device
>
> path matches the DevPath parameter. If one is found the Name is
> returned via
>
> - Name parameter. If sucessful the caller must free the memory allocated
> for
>
> + Name parameter. If successful the caller must free the memory allocated
> for
>
> Name.
>
>
>
> This function will use the internal lock to prevent changes to the map
> during
>
> @@ -817,7 +817,7 @@ EFI_DEVICE_PATH_PROTOCOL *
>
>
> @param[in] DevPath The device path to search for a name for.
>
> @param[in] ConsistMapping What state to verify map flag
> VAR_ID_CONSIST.
>
> - @param[out] Name On sucessful return the name of that
> device
> path.
>
> + @param[out] Name On successful return the name of that
> device
> path.
>
>
>
> @retval EFI_SUCCESS The DevPath was found and the name returned
>
> in Name.
>
> diff --git a/ShellPkg/Library/UefiHandleParsingLib/UefiHandleParsingLib.c
> b/ShellPkg/Library/UefiHandleParsingLib/UefiHandleParsingLib.c
> index aa0115bdd498..781da4d55d96 100644
> --- a/ShellPkg/Library/UefiHandleParsingLib/UefiHandleParsingLib.c
> +++ b/ShellPkg/Library/UefiHandleParsingLib/UefiHandleParsingLib.c
> @@ -2549,7 +2549,7 @@ Function to add a new GUID/Name mapping.
> @param[in] DumpFunc The pointer to the dump function
>
>
>
>
>
> -@retval EFI_SUCCESS The operation was sucessful
>
> +@retval EFI_SUCCESS The operation was successful
>
> @retval EFI_OUT_OF_RESOURCES A memory allocation failed
>
> @retval EFI_INVALID_PARAMETER Guid NameId was invalid
>
> **/
>
> @@ -2595,7 +2595,7 @@ InsertNewGuidNameMapping (
> @param[in] TheName The Guid's name
>
> @param[in] Lang RFC4646 language code list or NULL
>
>
>
> - @retval EFI_SUCCESS The operation was sucessful
>
> + @retval EFI_SUCCESS The operation was successful
>
> @retval EFI_ACCESS_DENIED There was a duplicate
>
> @retval EFI_OUT_OF_RESOURCES A memory allocation failed
>
> @retval EFI_INVALID_PARAMETER Guid or TheName was NULL
>
> @@ -2708,7 +2708,7 @@ GetProtocolInformationDump (
> @param[in] Lang The pointer to the language code.
>
> @param[out] Guid The pointer to the Guid.
>
>
>
> - @retval EFI_SUCCESS The operation was sucessful.
>
> + @retval EFI_SUCCESS The operation was successful.
>
> **/
>
> EFI_STATUS
>
> EFIAPI
>
> @@ -3312,7 +3312,7 @@ ParseHandleDatabaseByRelationshipWithType (
> If both DriverBindingHandle and ControllerHandle are NULL, then ASSERT.
>
> If MatchingHandleCount is NULL, then ASSERT.
>
>
>
> - If MatchingHandleBuffer is not NULL upon a sucessful return the memory
> must be
>
> + If MatchingHandleBuffer is not NULL upon a successful return the memory
> must be
>
> caller freed.
>
>
>
> @param[in] DriverBindingHandle Handle to a object with Driver Binding
> protocol
>
> @@ -3321,10 +3321,10 @@ ParseHandleDatabaseByRelationshipWithType (
> @param[in] Mask Mask of what relationship(s) is desired.
>
> @param[in] MatchingHandleCount Poitner to UINTN specifying number
> of HANDLES in
>
> MatchingHandleBuffer.
>
> - @param[out] MatchingHandleBuffer On a sucessful return a buffer of
> MatchingHandleCount
>
> + @param[out] MatchingHandleBuffer On a successful return a buffer of
> MatchingHandleCount
>
> EFI_HANDLEs and a terminating NULL
> EFI_HANDLE.
>
>
>
> - @retval EFI_SUCCESS The operation was sucessful and any
> related
> handles
>
> + @retval EFI_SUCCESS The operation was successful and any
> related
> handles
>
> are in MatchingHandleBuffer;
>
> @retval EFI_NOT_FOUND No matching handles were found.
>
> @retval EFI_INVALID_PARAMETER A parameter was invalid or out of
> range.
>
> @@ -3450,7 +3450,7 @@ ParseHandleDatabaseByRelationship (
> return.
>
>
>
>
>
> - @retval EFI_SUCCESS The operation was sucessful.
>
> + @retval EFI_SUCCESS The operation was successful.
>
> **/
>
> EFI_STATUS
>
> EFIAPI
>
> @@ -3613,7 +3613,7 @@ BuffernCatGrow (
> MatchingHandleBuffer on return.
>
> @param[out] MatchingHandleBuffer Buffer containing handles on a
> successful
>
> return.
>
> - @retval EFI_SUCCESS The operation was sucessful.
>
> + @retval EFI_SUCCESS The operation was successful.
>
> @sa ParseHandleDatabaseByRelationship
>
> **/
>
> EFI_STATUS
>
> diff --git
> a/ShellPkg/Library/UefiShellBcfgCommandLib/UefiShellBcfgCommandLib.c
> b/ShellPkg/Library/UefiShellBcfgCommandLib/UefiShellBcfgCommandLib.c
> index 4a19794b9fe0..0b94d9f5a183 100644
> ---
> a/ShellPkg/Library/UefiShellBcfgCommandLib/UefiShellBcfgCommandLib.c
> +++
> b/ShellPkg/Library/UefiShellBcfgCommandLib/UefiShellBcfgCommandLib.c
> @@ -79,10 +79,10 @@ typedef struct {
>
>
> @param[in] Index The boot or driver option index update.
>
> @param[in] DataSize The size in bytes of Data.
>
> - @param[in] Data The buffer for the optioanl data.
>
> + @param[in] Data The buffer for the optional data.
>
> @param[in] Target The target of the operation.
>
>
>
> - @retval EFI_SUCCESS The data was sucessfully updated.
>
> + @retval EFI_SUCCESS The data was successfully updated.
>
> @retval other A error occurred.
>
> **/
>
> EFI_STATUS
>
> @@ -172,7 +172,7 @@ UpdateOptionalData (
> @param[in, out] Crc The CRC value to return.
>
> @param[in] BootIndex The boot option index to CRC.
>
>
>
> - @retval EFI_SUCCESS The CRC was sucessfully returned.
>
> + @retval EFI_SUCCESS The CRC was successfully returned.
>
> @retval other A error occurred.
>
> **/
>
> EFI_STATUS
>
> @@ -226,9 +226,9 @@ GetBootOptionCrc (
> This function will populate the device path protocol parameter based on
> TheHandle.
>
>
>
> @param[in] TheHandle Driver handle.
>
> - @param[in, out] FilePath On a sucessful return the device path to the
> handle.
>
> + @param[in, out] FilePath On a successful return the device path to the
> handle.
>
>
>
> - @retval EFI_SUCCESS The device path was sucessfully returned.
>
> + @retval EFI_SUCCESS The device path was successfully returned.
>
> @retval other A error from gBS->HandleProtocol.
>
>
>
> @sa HandleProtocol
>
> @@ -284,11 +284,11 @@ GetDevicePathForDriverHandle (
> }
>
>
>
> /**
>
> - Functino to get Device Path by a handle.
>
> + Function to get Device Path by a handle.
>
>
>
> @param[in] TheHandle Use it to get DevicePath.
>
> @param[in] Target Boot option target.
>
> - @param[in, out] DevicePath On a sucessful return the device path to the
> handle.
>
> + @param[in, out] DevicePath On a successful return the device path to
> the handle.
>
>
>
> @retval SHELL_INVALID_PARAMETER The handle was NULL.
>
> @retval SHELL_NOT_FOUND Not found device path by handle.
>
> @@ -870,7 +870,7 @@ BcfgAdd (
> }
>
>
>
> /**
>
> - Funciton to remove an item.
>
> + Function to remove an item.
>
>
>
> @param[in] Target The target item to move.
>
> @param[in] CurrentOrder The pointer to the current order of items.
>
> @@ -934,7 +934,7 @@ BcfgRemove (
> }
>
>
>
> /**
>
> - Funciton to move a item to another location.
>
> + Function to move a item to another location.
>
>
>
> @param[in] Target The target item to move.
>
> @param[in] CurrentOrder The pointer to the current order of items.
>
> @@ -1921,7 +1921,7 @@ ShellCommandGetManFileNameBcfg (
> @param[in] SystemTable the EFI System Table pointer
>
> @param[in] Name the profile name to use
>
>
>
> - @retval EFI_SUCCESS the shell command handlers were installed
> sucessfully
>
> + @retval EFI_SUCCESS the shell command handlers were installed
> successfully
>
> @retval EFI_UNSUPPORTED the shell level required was not found.
>
> **/
>
> EFI_STATUS
>
> diff --git a/ShellPkg/Library/UefiShellCommandLib/UefiShellCommandLib.c
> b/ShellPkg/Library/UefiShellCommandLib/UefiShellCommandLib.c
> index 4549cbde9b9a..75fbd50cbe51 100644
> --- a/ShellPkg/Library/UefiShellCommandLib/UefiShellCommandLib.c
> +++ b/ShellPkg/Library/UefiShellCommandLib/UefiShellCommandLib.c
> @@ -155,7 +155,7 @@ CommandInit (
> @param ImageHandle the image handle of the process
>
> @param SystemTable the EFI System Table pointer
>
>
>
> - @retval EFI_SUCCESS the initialization was complete sucessfully
>
> + @retval EFI_SUCCESS the initialization was complete successfully
>
> **/
>
> RETURN_STATUS
>
> EFIAPI
>
> @@ -1286,7 +1286,7 @@ ShellCommandCreateNewMappingName (
> @param[in] Flags The Flags attribute for this map item.
>
> @param[in] Path TRUE to update path, FALSE to skip this step
> (should only be TRUE during initialization).
>
>
>
> - @retval EFI_SUCCESS The addition was sucessful.
>
> + @retval EFI_SUCCESS The addition was successful.
>
> @retval EFI_OUT_OF_RESOURCES A memory allocation failed.
>
> @retval EFI_INVALID_PARAMETER A parameter was invalid.
>
> **/
>
> @@ -1374,7 +1374,7 @@ ShellCommandAddMapItemAndUpdatePath (
>
>
> Also sets up the default path environment variable if Type is FileSystem.
>
>
>
> - @retval EFI_SUCCESS All map names were created sucessfully.
>
> + @retval EFI_SUCCESS All map names were created successfully.
>
> @retval EFI_NOT_FOUND No protocols were found in the system.
>
> @return Error returned from gBS->LocateHandle().
>
>
>
> diff --git a/ShellPkg/Library/UefiShellDebug1CommandsLib/Compress.c
> b/ShellPkg/Library/UefiShellDebug1CommandsLib/Compress.c
> index c76805ed30a9..3dea3c2f2f45 100644
> --- a/ShellPkg/Library/UefiShellDebug1CommandsLib/Compress.c
> +++ b/ShellPkg/Library/UefiShellDebug1CommandsLib/Compress.c
> @@ -1317,7 +1317,7 @@ Encode (
> @param[in, out] DstSize On input the size (in bytes) of DstBuffer,
> on
>
> return the number of bytes placed in
> DstBuffer.
>
>
>
> - @retval EFI_SUCCESS The compression was sucessful.
>
> + @retval EFI_SUCCESS The compression was successful.
>
> @retval EFI_BUFFER_TOO_SMALL The buffer was too small. DstSize is
> required.
>
> **/
>
> EFI_STATUS
>
> diff --git a/ShellPkg/Library/UefiShellDebug1CommandsLib/Compress.h
> b/ShellPkg/Library/UefiShellDebug1CommandsLib/Compress.h
> index dad3201c6053..37338ad4bd99 100644
> --- a/ShellPkg/Library/UefiShellDebug1CommandsLib/Compress.h
> +++ b/ShellPkg/Library/UefiShellDebug1CommandsLib/Compress.h
> @@ -18,7 +18,7 @@
> @param[in, out] DstSize On input the size (in bytes) of DstBuffer,
> on
>
> return the number of bytes placed in
> DstBuffer.
>
>
>
> - @retval EFI_SUCCESS The compression was sucessful.
>
> + @retval EFI_SUCCESS The compression was successful.
>
> @retval EFI_BUFFER_TOO_SMALL The buffer was too small. DstSize is
> required.
>
> **/
>
> EFI_STATUS
>
> diff --git
> a/ShellPkg/Library/UefiShellDebug1CommandsLib/UefiShellDebug1Comman
> dsLib.c
> b/ShellPkg/Library/UefiShellDebug1CommandsLib/UefiShellDebug1Comman
> dsLib.c
> index c3682eeae476..a1a055928f3f 100644
> ---
> a/ShellPkg/Library/UefiShellDebug1CommandsLib/UefiShellDebug1Comman
> dsLib.c
> +++
> b/ShellPkg/Library/UefiShellDebug1CommandsLib/UefiShellDebug1Comman
> dsLib.c
> @@ -33,7 +33,7 @@ ShellCommandGetManFileNameDebug1 (
> @param ImageHandle the image handle of the process
>
> @param SystemTable the EFI System Table pointer
>
>
>
> - @retval EFI_SUCCESS the shell command handlers were installed
> sucessfully
>
> + @retval EFI_SUCCESS the shell command handlers were installed
> successfully
>
> @retval EFI_UNSUPPORTED the shell level required was not found.
>
> **/
>
> EFI_STATUS
>
> diff --git
> a/ShellPkg/Library/UefiShellDriver1CommandsLib/UefiShellDriver1Command
> sLib.c
> b/ShellPkg/Library/UefiShellDriver1CommandsLib/UefiShellDriver1Comman
> dsLib.c
> index d441f66e096f..28c4282659f4 100644
> ---
> a/ShellPkg/Library/UefiShellDriver1CommandsLib/UefiShellDriver1Command
> sLib.c
> +++
> b/ShellPkg/Library/UefiShellDriver1CommandsLib/UefiShellDriver1Comman
> dsLib.c
> @@ -32,7 +32,7 @@ ShellCommandGetManFileNameDriver1 (
> @param ImageHandle the image handle of the process
>
> @param SystemTable the EFI System Table pointer
>
>
>
> - @retval EFI_SUCCESS the shell command handlers were installed
> sucessfully
>
> + @retval EFI_SUCCESS the shell command handlers were installed
> successfully
>
> @retval EFI_UNSUPPORTED the shell level required was not found.
>
> **/
>
> EFI_STATUS
>
> diff --git
> a/ShellPkg/Library/UefiShellInstall1CommandsLib/UefiShellInstall1Command
> sLib.c
> b/ShellPkg/Library/UefiShellInstall1CommandsLib/UefiShellInstall1Command
> sLib.c
> index 16c2df338297..7745f3415f08 100644
> ---
> a/ShellPkg/Library/UefiShellInstall1CommandsLib/UefiShellInstall1Command
> sLib.c
> +++
> b/ShellPkg/Library/UefiShellInstall1CommandsLib/UefiShellInstall1Command
> sLib.c
> @@ -16,7 +16,7 @@
> @param ImageHandle the image handle of the process
>
> @param SystemTable the EFI System Table pointer
>
>
>
> - @retval EFI_SUCCESS the shell command handlers were installed
> sucessfully
>
> + @retval EFI_SUCCESS the shell command handlers were installed
> successfully
>
> @retval EFI_UNSUPPORTED the shell level required was not found.
>
> **/
>
> EFI_STATUS
>
> diff --git
> a/ShellPkg/Library/UefiShellLevel1CommandsLib/UefiShellLevel1Commands
> Lib.c
> b/ShellPkg/Library/UefiShellLevel1CommandsLib/UefiShellLevel1Commands
> Lib.c
> index 92e438437fa4..503b74c86505 100644
> ---
> a/ShellPkg/Library/UefiShellLevel1CommandsLib/UefiShellLevel1Commands
> Lib.c
> +++
> b/ShellPkg/Library/UefiShellLevel1CommandsLib/UefiShellLevel1Commands
> Lib.c
> @@ -34,7 +34,7 @@ ShellCommandGetManFileNameLevel1 (
> @param ImageHandle the image handle of the process
>
> @param SystemTable the EFI System Table pointer
>
>
>
> - @retval EFI_SUCCESS the shell command handlers were installed
> sucessfully
>
> + @retval EFI_SUCCESS the shell command handlers were installed
> successfully
>
> @retval EFI_UNSUPPORTED the shell level required was not found.
>
> **/
>
> EFI_STATUS
>
> @@ -243,7 +243,7 @@ TestNodeForMove (
> @param[in] MovePast TRUE makes function return 1 past the found
>
> location.
>
> @param[in] FindOnly TRUE to not change the ScriptFile.
>
> - @param[in] WrapAroundScript TRUE to wrap end-to-begining or vise versa
> in
>
> + @param[in] WrapAroundScript TRUE to wrap end-to-beginning or vise
> versa in
>
> searching.
>
> **/
>
> BOOLEAN
>
> diff --git
> a/ShellPkg/Library/UefiShellLevel1CommandsLib/UefiShellLevel1Commands
> Lib.h
> b/ShellPkg/Library/UefiShellLevel1CommandsLib/UefiShellLevel1Commands
> Lib.h
> index 45584cdb9616..6d3294ad04fd 100644
> ---
> a/ShellPkg/Library/UefiShellLevel1CommandsLib/UefiShellLevel1Commands
> Lib.h
> +++
> b/ShellPkg/Library/UefiShellLevel1CommandsLib/UefiShellLevel1Commands
> Lib.h
> @@ -183,7 +183,7 @@ LIST_ENTRY *
> @param[in] MovePast TRUE makes function return 1 past the found
>
> location.
>
> @param[in] FindOnly TRUE to not change the ScriptFile.
>
> - @param[in] WrapAroundScript TRUE to wrap end-to-begining or vise versa
> in
>
> + @param[in] WrapAroundScript TRUE to wrap end-to-beginning or vise
> versa in
>
> searching.
>
> **/
>
> BOOLEAN
>
> diff --git a/ShellPkg/Library/UefiShellLevel2CommandsLib/Cd.c
> b/ShellPkg/Library/UefiShellLevel2CommandsLib/Cd.c
> index 48ef988fb744..88791c442866 100644
> --- a/ShellPkg/Library/UefiShellLevel2CommandsLib/Cd.c
> +++ b/ShellPkg/Library/UefiShellLevel2CommandsLib/Cd.c
> @@ -14,8 +14,8 @@
> /**
>
> Function will replace drive identifier with CWD.
>
>
>
> - If FullPath begining with ':' is invalid path, then ASSERT.
>
> - If FullPath not include dirve identifier , then do nothing.
>
> + If FullPath beginning with ':' is invalid path, then ASSERT.
>
> + If FullPath not include drive identifier , then do nothing.
>
> If FullPath likes "fs0:\xx" or "fs0:/xx" , then do nothing.
>
> If FullPath likes "fs0:xxx" or "fs0:", the drive replaced by CWD.
>
>
>
> diff --git a/ShellPkg/Library/UefiShellLevel2CommandsLib/Ls.c
> b/ShellPkg/Library/UefiShellLevel2CommandsLib/Ls.c
> index 6f9d035a1ae4..c03967ee3a2b 100644
> --- a/ShellPkg/Library/UefiShellLevel2CommandsLib/Ls.c
> +++ b/ShellPkg/Library/UefiShellLevel2CommandsLib/Ls.c
> @@ -427,7 +427,7 @@ FileTimeToLocalTime (
> @param[in] ListUnfiltered TRUE to request listing the directory contents
>
> unfiltered.
>
>
>
> - @retval SHELL_SUCCESS the printing was sucessful.
>
> + @retval SHELL_SUCCESS the printing was successful.
>
> **/
>
> SHELL_STATUS
>
> PrintLsOutput (
>
> diff --git a/ShellPkg/Library/UefiShellLevel2CommandsLib/Map.c
> b/ShellPkg/Library/UefiShellLevel2CommandsLib/Map.c
> index f3c888edd48c..1e7168364d5f 100644
> --- a/ShellPkg/Library/UefiShellLevel2CommandsLib/Map.c
> +++ b/ShellPkg/Library/UefiShellLevel2CommandsLib/Map.c
> @@ -1354,7 +1354,7 @@ ShellCommandRunMap (
> SName,
>
> TRUE
>
> );
>
> - } // we were sucessful so do an output
>
> + } // we were successful so do an output
>
> }
>
> } // got a valid map target
>
> } // got 2 variables
>
> diff --git a/ShellPkg/Library/UefiShellLevel2CommandsLib/Mv.c
> b/ShellPkg/Library/UefiShellLevel2CommandsLib/Mv.c
> index 58cdeca7cb11..d93facc6f5d7 100644
> --- a/ShellPkg/Library/UefiShellLevel2CommandsLib/Mv.c
> +++ b/ShellPkg/Library/UefiShellLevel2CommandsLib/Mv.c
> @@ -216,7 +216,7 @@ IsValidMove (
> that there is only a single possible target (IE we cant have wildcards that
>
> have 2 possible destination).
>
>
>
> - if the result is sucessful the caller must free *DestPathPointer.
>
> + if the result is successful the caller must free *DestPathPointer.
>
>
>
> @param[in] DestParameter The original path to the
> destination.
>
> @param[in, out] DestPathPointer A pointer to the callee allocated final
> path.
>
> @@ -227,7 +227,7 @@ IsValidMove (
> @retval SHELL_INVALID_PARAMETER The DestParameter could not be
> resolved to a location.
>
> @retval SHELL_INVALID_PARAMETER The DestParameter could be
> resolved to more than 1 location.
>
> @retval SHELL_INVALID_PARAMETER Cwd is required and is NULL.
>
> - @retval SHELL_SUCCESS The operation was sucessful.
>
> + @retval SHELL_SUCCESS The operation was successful.
>
> **/
>
> SHELL_STATUS
>
> GetDestinationLocation (
>
> @@ -850,7 +850,7 @@ ShellCommandRunMv (
> } else {
>
> //
>
> // ValidateAndMoveFiles will report errors to the screen itself
>
> - // Only change ShellStatus if it's sucessful
>
> + // Only change ShellStatus if it's successful
>
> //
>
> if (ShellStatus == SHELL_SUCCESS) {
>
> ShellStatus = ValidateAndMoveFiles (FileList, &Response,
> ShellCommandLineGetRawValue (Package, ParamCount));
>
> diff --git a/ShellPkg/Library/UefiShellLevel2CommandsLib/Set.c
> b/ShellPkg/Library/UefiShellLevel2CommandsLib/Set.c
> index c9082eb76ce6..79596373d6e3 100644
> --- a/ShellPkg/Library/UefiShellLevel2CommandsLib/Set.c
> +++ b/ShellPkg/Library/UefiShellLevel2CommandsLib/Set.c
> @@ -14,7 +14,7 @@
>
>
> If you spawn a pre 2.0 shell from the Shell 2.0 the environment variable
> may
> not carry through.
>
>
>
> - @retval STATUS_SUCCESS the printout was sucessful
>
> + @retval STATUS_SUCCESS the printout was successful
>
> @return any return code from GetNextVariableName except
> EFI_NOT_FOUND
>
> **/
>
> SHELL_STATUS
>
> diff --git
> a/ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2Commands
> Lib.c
> b/ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2Commands
> Lib.c
> index 794284d02ebe..ae643996aa72 100644
> ---
> a/ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2Commands
> Lib.c
> +++
> b/ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2Commands
> Lib.c
> @@ -53,7 +53,7 @@ ShellCommandGetManFileNameLevel2 (
> @param ImageHandle the image handle of the process
>
> @param SystemTable the EFI System Table pointer
>
>
>
> - @retval EFI_SUCCESS the shell command handlers were installed
> sucessfully
>
> + @retval EFI_SUCCESS the shell command handlers were installed
> successfully
>
> @retval EFI_UNSUPPORTED the shell level required was not found.
>
> **/
>
> EFI_STATUS
>
> @@ -148,10 +148,10 @@ ShellLevel2CommandsLibDestructor (
> }
>
>
>
> /**
>
> - returns a fully qualified directory (contains a map drive at the begining)
>
> + returns a fully qualified directory (contains a map drive at the beginning)
>
> path from a unknown directory path.
>
>
>
> - If Path is already fully qualified this will return a duplicat otherwise
> this
>
> + If Path is already fully qualified this will return a duplicate otherwise
> this
>
> will use get the current directory and use that to build the fully
> qualified
>
> version.
>
>
>
> @@ -161,7 +161,7 @@ ShellLevel2CommandsLibDestructor (
>
>
> @retval NULL A memory allocation failed
>
> @retval NULL A fully qualified path could not be discovered.
>
> - @retval other An allocated pointer to a fuly qualified path.
>
> + @retval other An allocated pointer to a fully qualified path.
>
> **/
>
> CHAR16 *
>
> GetFullyQualifiedPath (
>
> diff --git
> a/ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2Commands
> Lib.h
> b/ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2Commands
> Lib.h
> index 7c525b31d056..814044d095d6 100644
> ---
> a/ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2Commands
> Lib.h
> +++
> b/ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2Commands
> Lib.h
> @@ -241,10 +241,10 @@ ShellCommandRunMv (
> );
>
>
>
> /**
>
> - returns a fully qualified directory (contains a map drive at the begining)
>
> + returns a fully qualified directory (contains a map drive at the beginning)
>
> path from a unknown directory path.
>
>
>
> - If Path is already fully qualified this will return a duplicat otherwise
> this
>
> + If Path is already fully qualified this will return a duplicate otherwise
> this
>
> will use get the current directory and use that to build the fully
> qualified
>
> version.
>
>
>
> @@ -254,7 +254,7 @@ ShellCommandRunMv (
>
>
> @retval NULL A memory allocation failed
>
> @retval NULL a fully qualified path could not be discovered.
>
> - @retval other pointer to a fuly qualified path.
>
> + @retval other pointer to a fully qualified path.
>
> **/
>
> CHAR16 *
>
> GetFullyQualifiedPath (
>
> diff --git a/ShellPkg/Library/UefiShellLevel2CommandsLib/Vol.c
> b/ShellPkg/Library/UefiShellLevel2CommandsLib/Vol.c
> index 8f7310c07474..c4accca6cdf0 100644
> --- a/ShellPkg/Library/UefiShellLevel2CommandsLib/Vol.c
> +++ b/ShellPkg/Library/UefiShellLevel2CommandsLib/Vol.c
> @@ -18,7 +18,7 @@
> @param[in] Delete TRUE to delete the volume label. FALSE otherwise.
>
> @param[in] Name New name to set to the volume label.
>
>
>
> - @retval SHELL_SUCCESS The operation was sucessful.
>
> + @retval SHELL_SUCCESS The operation was successful.
>
> **/
>
> SHELL_STATUS
>
> HandleVol (
>
> diff --git a/ShellPkg/Library/UefiShellLevel3CommandsLib/Alias.c
> b/ShellPkg/Library/UefiShellLevel3CommandsLib/Alias.c
> index 5a8a21aac7b8..8ad0dd63ad19 100644
> --- a/ShellPkg/Library/UefiShellLevel3CommandsLib/Alias.c
> +++ b/ShellPkg/Library/UefiShellLevel3CommandsLib/Alias.c
> @@ -17,7 +17,7 @@
> @param[in] Alias Points to the NULL-terminated shell alias.
>
> If this parameter is NULL, then all
>
> aliases will be returned in ReturnedData.
>
> - @retval SHELL_SUCCESS the printout was sucessful
>
> + @retval SHELL_SUCCESS the printout was successful
>
> **/
>
> SHELL_STATUS
>
> PrintSingleShellAlias (
>
> @@ -47,7 +47,7 @@ PrintSingleShellAlias (
> /**
>
> Print out each alias registered with the Shell.
>
>
>
> - @retval STATUS_SUCCESS the printout was sucessful
>
> + @retval STATUS_SUCCESS the printout was successful
>
> @return any return code from GetNextVariableName except
> EFI_NOT_FOUND
>
> **/
>
> SHELL_STATUS
>
> diff --git a/ShellPkg/Library/UefiShellLevel3CommandsLib/Touch.c
> b/ShellPkg/Library/UefiShellLevel3CommandsLib/Touch.c
> index 823328155bfe..624641696777 100644
> --- a/ShellPkg/Library/UefiShellLevel3CommandsLib/Touch.c
> +++ b/ShellPkg/Library/UefiShellLevel3CommandsLib/Touch.c
> @@ -232,8 +232,8 @@ ShellCommandRunTouch (
> }
>
>
>
> //
>
> - // make sure we completed the param parsing sucessfully...
>
> - // Also make sure that any previous action was sucessful
>
> + // make sure we completed the param parsing successfully...
>
> + // Also make sure that any previous action was successful
>
> //
>
> if (ShellStatus == SHELL_SUCCESS) {
>
> //
>
> diff --git a/ShellPkg/Library/UefiShellLevel3CommandsLib/Type.c
> b/ShellPkg/Library/UefiShellLevel3CommandsLib/Type.c
> index d00997d8189e..8e3138ad5b6a 100644
> --- a/ShellPkg/Library/UefiShellLevel3CommandsLib/Type.c
> +++ b/ShellPkg/Library/UefiShellLevel3CommandsLib/Type.c
> @@ -251,8 +251,8 @@ ShellCommandRunType (
> }
>
>
>
> //
>
> - // make sure we completed the param parsing sucessfully...
>
> - // Also make sure that any previous action was sucessful
>
> + // make sure we completed the param parsing successfully...
>
> + // Also make sure that any previous action was successful
>
> //
>
> if (ShellStatus == SHELL_SUCCESS) {
>
> //
>
> diff --git
> a/ShellPkg/Library/UefiShellLevel3CommandsLib/UefiShellLevel3Commands
> Lib.c
> b/ShellPkg/Library/UefiShellLevel3CommandsLib/UefiShellLevel3Commands
> Lib.c
> index bef59b031cbb..35bb3803074a 100644
> ---
> a/ShellPkg/Library/UefiShellLevel3CommandsLib/UefiShellLevel3Commands
> Lib.c
> +++
> b/ShellPkg/Library/UefiShellLevel3CommandsLib/UefiShellLevel3Commands
> Lib.c
> @@ -33,7 +33,7 @@ ShellCommandGetManFileNameLevel3 (
> @param ImageHandle the image handle of the process
>
> @param SystemTable the EFI System Table pointer
>
>
>
> - @retval EFI_SUCCESS the shell command handlers were installed
> sucessfully
>
> + @retval EFI_SUCCESS the shell command handlers were installed
> successfully
>
> @retval EFI_UNSUPPORTED the shell level required was not found.
>
> **/
>
> EFI_STATUS
>
> diff --git a/ShellPkg/Library/UefiShellLib/UefiShellLib.c
> b/ShellPkg/Library/UefiShellLib/UefiShellLib.c
> index 746c9ccecee0..93e36197b26b 100644
> --- a/ShellPkg/Library/UefiShellLib/UefiShellLib.c
> +++ b/ShellPkg/Library/UefiShellLib/UefiShellLib.c
> @@ -417,7 +417,7 @@ ShellLibConstructorWorker (
> @param ImageHandle the image handle of the process
>
> @param SystemTable the EFI System Table pointer
>
>
>
> - @retval EFI_SUCCESS the initialization was complete sucessfully
>
> + @retval EFI_SUCCESS the initialization was complete successfully
>
> @return others an error ocurred during initialization
>
> **/
>
> EFI_STATUS
>
> @@ -516,7 +516,7 @@ ShellLibDestructor (
>
>
> /**
>
> This function causes the shell library to initialize itself. If the shell
> library
>
> - is already initialized it will de-initialize all the current protocol
> poitners and
>
> + is already initialized it will de-initialize all the current protocol
> pointers and
>
> re-populate them again.
>
>
>
> When the library is used with PcdShellLibAutoInitialize set to true this
> function
>
> @@ -524,7 +524,7 @@ ShellLibDestructor (
>
>
> This function is intended for internal access for shell commands only.
>
>
>
> - @retval EFI_SUCCESS the initialization was complete sucessfully
>
> + @retval EFI_SUCCESS the initialization was complete successfully
>
>
>
> **/
>
> EFI_STATUS
>
> @@ -962,7 +962,7 @@ ShellWriteFile (
>
>
> @param FileHandle the file handle to close.
>
>
>
> -@retval EFI_SUCCESS the file handle was closed sucessfully.
>
> +@retval EFI_SUCCESS the file handle was closed successfully.
>
> **/
>
> EFI_STATUS
>
> EFIAPI
>
> @@ -982,7 +982,7 @@ ShellCloseFile (
>
>
> @param FileHandle the file handle to delete
>
>
>
> - @retval EFI_SUCCESS the file was closed sucessfully
>
> + @retval EFI_SUCCESS the file was closed successfully
>
> @retval EFI_WARN_DELETE_FAILURE the handle was closed, but the file
> was not
>
> deleted
>
> @retval INVALID_PARAMETER One of the parameters has an invalid value.
>
> @@ -1008,9 +1008,9 @@ ShellDeleteFile (
> has the effect of starting the read process of the directory entries over.
>
>
>
> @param FileHandle The file handle on which the position is
> being set
>
> - @param Position Byte position from begining of file
>
> + @param Position Byte position from beginning of file
>
>
>
> - @retval EFI_SUCCESS Operation completed sucessfully.
>
> + @retval EFI_SUCCESS Operation completed successfully.
>
> @retval EFI_UNSUPPORTED the seek request for non-zero is not valid
> on
>
> directories.
>
> @retval INVALID_PARAMETER One of the parameters has an invalid value.
>
> @@ -1034,9 +1034,9 @@ ShellSetFilePosition (
> if FileHandle is a directory.
>
>
>
> @param FileHandle The open file handle on which to get the
> position.
>
> - @param Position Byte position from begining of file.
>
> + @param Position Byte position from beginning of file.
>
>
>
> - @retval EFI_SUCCESS the operation completed sucessfully.
>
> + @retval EFI_SUCCESS the operation completed successfully.
>
> @retval INVALID_PARAMETER One of the parameters has an invalid value.
>
> @retval EFI_UNSUPPORTED the request is not valid on directories.
>
> **/
>
> @@ -1152,7 +1152,7 @@ ShellFindNextFile (
> @param FileHandle file handle from which size is retrieved
>
> @param Size pointer to size
>
>
>
> - @retval EFI_SUCCESS operation was completed sucessfully
>
> + @retval EFI_SUCCESS operation was completed successfully
>
> @retval EFI_DEVICE_ERROR cannot access the file
>
> **/
>
> EFI_STATUS
>
> @@ -1254,7 +1254,7 @@ environment variable is created and assigned the
> specified value.
> @param EnvVal The Value of the environment variable
>
> @param Volatile Indicates whether the variable is
> non-volatile
> (FALSE) or volatile (TRUE).
>
>
>
> - @retval EFI_SUCCESS the operation was completed sucessfully
>
> + @retval EFI_SUCCESS the operation was completed successfully
>
> @retval EFI_UNSUPPORTED This operation is not allowed in pre UEFI 2.0
> Shell environments
>
> **/
>
> EFI_STATUS
>
> @@ -1302,7 +1302,7 @@ ShellSetEnvironmentVariable (
> in the form "x=y". If NULL, the current
> set is used.
>
> @param[out] Status The status of the run command line.
>
>
>
> - @retval EFI_SUCCESS The operation completed sucessfully.
> Status
>
> + @retval EFI_SUCCESS The operation completed successfully.
> Status
>
> contains the status code returned.
>
> @retval EFI_INVALID_PARAMETER A parameter contains an invalid value.
>
> @retval EFI_OUT_OF_RESOURCES Out of resources.
>
> @@ -1576,7 +1576,7 @@ InternalShellConvertFileListType (
> NewInfo->Info = AllocateCopyPool ((UINTN)OldInfo->Info->Size,
> OldInfo->Info);
>
>
>
> //
>
> - // make sure all the memory allocations were sucessful
>
> + // make sure all the memory allocations were successful
>
> //
>
> if ((NULL == NewInfo->FullName) || (NewInfo->FileName == NULL) ||
> (NewInfo->Info == NULL)) {
>
> //
>
> @@ -1621,7 +1621,7 @@ InternalShellConvertFileListType (
> @param OpenMode mode to open files with
>
> @param ListHead head of linked list of results
>
>
>
> - @retval EFI_SUCCESS the operation was sucessful and the list head
>
> + @retval EFI_SUCCESS the operation was successful and the list
> head
>
> contains the list of opened files
>
> @return != EFI_SUCCESS the operation failed
>
>
>
> @@ -1748,7 +1748,7 @@ ShellOpenFileMetaArg (
>
>
> @param ListHead the pointer to free.
>
>
>
> - @retval EFI_SUCCESS the operation was sucessful.
>
> + @retval EFI_SUCCESS the operation was successful.
>
> **/
>
> EFI_STATUS
>
> EFIAPI
>
> @@ -2131,7 +2131,7 @@ InternalIsFlag (
> @param[in] Argc Count of parameters in Argv
>
> @param[in] AlwaysAllowNumbers TRUE to allow numbers always, FALSE
> otherwise.
>
>
>
> - @retval EFI_SUCCESS The operation completed sucessfully.
>
> + @retval EFI_SUCCESS The operation completed successfully.
>
> @retval EFI_OUT_OF_RESOURCES A memory allocation failed
>
> @retval EFI_INVALID_PARAMETER A parameter was invalid
>
> @retval EFI_VOLUME_CORRUPTED the command line was corrupt. an
> argument was
>
> @@ -2371,7 +2371,7 @@ InternalCommandLineParse (
> @param[in] AutoPageBreak Will automatically set PageBreakEnabled.
>
> @param[in] AlwaysAllowNumbers Will never fail for number based flags.
>
>
>
> - @retval EFI_SUCCESS The operation completed sucessfully.
>
> + @retval EFI_SUCCESS The operation completed successfully.
>
> @retval EFI_OUT_OF_RESOURCES A memory allocation failed.
>
> @retval EFI_INVALID_PARAMETER A parameter was invalid.
>
> @retval EFI_VOLUME_CORRUPTED The command line was corrupt.
>
> @@ -2875,7 +2875,7 @@ ShellCopySearchAndReplace (
>
>
> @param[in] String The string to print out.
>
>
>
> - @retval EFI_SUCCESS The operation was sucessful.
>
> + @retval EFI_SUCCESS The operation was successful.
>
> @retval !EFI_SUCCESS The operation failed.
>
> **/
>
> EFI_STATUS
>
> @@ -3515,7 +3515,7 @@ StrnCatGrow (
> @param Prompt Pointer to string prompt to use to request
> input.
>
> @param Response Pointer to Response which will be populated
> upon return.
>
>
>
> - @retval EFI_SUCCESS The operation was sucessful.
>
> + @retval EFI_SUCCESS The operation was successful.
>
> @retval EFI_UNSUPPORTED The operation is not supported as
> requested.
>
> @retval EFI_INVALID_PARAMETER A parameter was invalid.
>
> @return other The operation failed.
>
> @@ -3801,7 +3801,7 @@ ShellPromptForResponse (
> @param[in] HiiFormatHandle The format string Handle for getting from
> Hii.
>
> @param Response Pointer to Response which will be populated
> upon return.
>
>
>
> - @retval EFI_SUCCESS the operation was sucessful.
>
> + @retval EFI_SUCCESS the operation was successful.
>
> @return other the operation failed.
>
>
>
> @sa ShellPromptForResponse
>
> diff --git a/ShellPkg/Library/UefiShellNetwork1CommandsLib/Ping.c
> b/ShellPkg/Library/UefiShellNetwork1CommandsLib/Ping.c
> index 6a002b15e5f8..21e09db70df0 100644
> --- a/ShellPkg/Library/UefiShellNetwork1CommandsLib/Ping.c
> +++ b/ShellPkg/Library/UefiShellNetwork1CommandsLib/Ping.c
> @@ -511,7 +511,7 @@ Ping6MatchEchoReply (
> The original intention is to send a request.
>
> Currently, the application retransmits an icmp6 echo request packet
>
> per second in sendnumber times that is specified by the user.
>
> - Because nothing can be done here, all things move to the timer rountine.
>
> + Because nothing can be done here, all things move to the timer routine.
>
>
>
> @param[in] Event A EFI_EVENT type event.
>
> @param[in] Context The pointer to Context.
>
> diff --git
> a/ShellPkg/Library/UefiShellNetwork1CommandsLib/UefiShellNetwork1Com
> mandsLib.c
> b/ShellPkg/Library/UefiShellNetwork1CommandsLib/UefiShellNetwork1Com
> mandsLib.c
> index c614c26c0c30..4d4bc2b4ab8d 100644
> ---
> a/ShellPkg/Library/UefiShellNetwork1CommandsLib/UefiShellNetwork1Com
> mandsLib.c
> +++
> b/ShellPkg/Library/UefiShellNetwork1CommandsLib/UefiShellNetwork1Com
> mandsLib.c
> @@ -32,7 +32,7 @@ ShellCommandGetManFileNameNetwork1 (
> @param ImageHandle The image handle of the process.
>
> @param SystemTable The EFI System Table pointer.
>
>
>
> - @retval EFI_SUCCESS The shell command handlers were installed
> sucessfully.
>
> + @retval EFI_SUCCESS The shell command handlers were installed
> successfully.
>
> @retval EFI_UNSUPPORTED The shell level required was not found.
>
> **/
>
> EFI_STATUS
>
> diff --git a/ShellPkg/Library/UefiShellNetwork2CommandsLib/Ping6.c
> b/ShellPkg/Library/UefiShellNetwork2CommandsLib/Ping6.c
> index e0b58d4b8513..43d578bd6ad8 100644
> --- a/ShellPkg/Library/UefiShellNetwork2CommandsLib/Ping6.c
> +++ b/ShellPkg/Library/UefiShellNetwork2CommandsLib/Ping6.c
> @@ -357,7 +357,7 @@ Ping6OnMatchEchoReply (
> The original intention is to send a request.
>
> Currently, the application retransmits an icmp6 echo request packet
>
> per second in sendnumber times that is specified by the user.
>
> - Because nothing can be done here, all things move to the timer rountine.
>
> + Because nothing can be done here, all things move to the timer routine.
>
>
>
> @param[in] Event A EFI_EVENT type event.
>
> @param[in] Context The pointer to Context.
>
> diff --git
> a/ShellPkg/Library/UefiShellNetwork2CommandsLib/UefiShellNetwork2Com
> mandsLib.c
> b/ShellPkg/Library/UefiShellNetwork2CommandsLib/UefiShellNetwork2Com
> mandsLib.c
> index 29c82450b746..20445ca4af26 100644
> ---
> a/ShellPkg/Library/UefiShellNetwork2CommandsLib/UefiShellNetwork2Com
> mandsLib.c
> +++
> b/ShellPkg/Library/UefiShellNetwork2CommandsLib/UefiShellNetwork2Com
> mandsLib.c
> @@ -32,7 +32,7 @@ ShellCommandGetManFileNameNetwork2 (
> @param ImageHandle The image handle of the process.
>
> @param SystemTable The EFI System Table pointer.
>
>
>
> - @retval EFI_SUCCESS The shell command handlers were installed
> sucessfully.
>
> + @retval EFI_SUCCESS The shell command handlers were installed
> successfully.
>
> @retval EFI_UNSUPPORTED The shell level required was not found.
>
> **/
>
> EFI_STATUS
>
> --
> 2.39.3 (Apple Git-145)
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#111116): https://edk2.groups.io/g/devel/message/111116
Mute This Topic: https://groups.io/mt/102492744/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
