From: Michael Kubacki <michael.kuba...@microsoft.com>
Since the code is most regularly tested in CI, distro/versioning
details are updated to match the latest CI configuration.
CI has moved from Ubuntu 18.04 to Ubuntu 22.04 since the time of the
file's creation, but the code is actually built in a Fedora container
so Fedora is mentioned as the primary build/test environment.
Updates the following information:
- Build OS: Fedora 37 Linux
- Supported Configuration: Additional DSCs added
- Python: 3.12.x
- Packaging Tool: dnf instead of apt
- Container Details: Added
- Primary Build Example: QemuBuild.py instead of PlatformBuild.py
Cc: Ard Biesheuvel <ardb+tianoc...@kernel.org>
Cc: Gerd Hoffmann <kra...@redhat.com>
Cc: Julien Grall <jul...@xen.org>
Cc: Leif Lindholm <quic_llind...@quicinc.com>
Cc: Sami Mujawar <sami.muja...@arm.com>
Signed-off-by: Michael Kubacki <michael.kuba...@microsoft.com>
---
Notes:
I don't use ArmVirtPkg that often. I was reviewing the
file for the latest build instructions and realized it
was quite out of date, leading to this patch.
The project is using Python 3.11.x right now, but a
patch is going in the next day or so that has shown
Python 3.12 will work:
https://edk2.groups.io/g/devel/message/110323
So I went ahead and made the Python version in this
patch mention 3.12.x.
ArmVirtPkg/PlatformCI/ReadMe.md | 53 +++++++++++++-------
1 file changed, 34 insertions(+), 19 deletions(-)
diff --git a/ArmVirtPkg/PlatformCI/ReadMe.md b/ArmVirtPkg/PlatformCI/ReadMe.md
index ee8d8cd61e73..c0f2b2a43b3c 100644
--- a/ArmVirtPkg/PlatformCI/ReadMe.md
+++ b/ArmVirtPkg/PlatformCI/ReadMe.md
@@ -5,28 +5,43 @@ to use the same Pytools based build infrastructure locally.
## Supported Configuration Details
-This solution for building and running ArmVirtPkg has only been validated with
Ubuntu
-18.04 and the GCC5 toolchain. Two different firmware builds are supported and
are
-described below.
+This solution for building and running ArmVirtPkg has been validated with
Fedora
+37 Linux and the GCC5 toolchain. Two different firmware builds are supported
+and are described below.
-| Configuration name | Architecture | DSC File |Additional
Flags |
-| :---------- | :----- | :----- | :----
|
-| AARCH64 | AARCH64 | ArmVirtQemu.dsc | None
|
-| ARM | ARM | ArmVirtQemu.dsc | None
|
+| Configuration name | Architecture | DSC File |
Additional Flags |
+| :---------- | :----- | :----- |
:---- |
+| AARCH64 - KVM Cloud HV | AARCH64 | ArmVirtCloudHv.dsc | None
|
+| ARM - KVM Cloud HV | ARM | ArmVirtCloudHv.dsc | None
|
+| AARCH64 - kvmtool | AARCH64 | ArmVirtKvmTool.dsc | None
|
+| ARM - kvmtool | ARM | ArmVirtKvmTool.dsc | None
|
+| AARCH64 - QEMU | AARCH64 | ArmVirtQemu.dsc | None
|
+| ARM - QEMU | ARM | ArmVirtQemu.dsc | None
|
+| AARCH64 - QEMU Kernel | AARCH64 | ArmVirtQemuKernel.dsc | None
|
+| ARM - QEMU Kernel | ARM | ArmVirtQemuKernel.dsc | None
|
+| AARCH64 - Xen HV | AARCH64 | ArmVirtXen.dsc | None
|
+| ARM - Xen HV | ARM | ArmVirtXen.dsc | None
|
## EDK2 Developer environment
-- [Python 3.8.x - Download & Install](https://www.python.org/downloads/)
+- [Python 3.12.x - Download & Install](https://www.python.org/downloads/)
- [GIT - Download & Install](https://git-scm.com/download/)
- [QEMU - Download, Install, and add to your
path](https://www.qemu.org/download/)
- [Edk2 Source](https://github.com/tianocore/edk2)
-- Additional packages found necessary for Ubuntu 18.04
- - apt-get install gcc g++ make uuid-dev
+- Additional packages found necessary for Fedora Linux 37
+ - dnf install gcc g++ make libuuid-devel
Note: edksetup, Submodule initialization and manual installation of NASM,
iASL, or
the required cross-compiler toolchains are **not** required, this is handled
by the
Pytools build system.
+The code is built in CI using a container. The latest Fedora Linux 37
container is
+available in this GitHub container registry feed
+[fedora-37-test](https://github.com/tianocore/containers/pkgs/container/containers%2Ffedora-37-test).
+
+The exact container version tested in CI is maintained in this file
+[edk2/.azurepipelines/templates/default.yml](https://github.com/tianocore/edk2/blob/HEAD/.azurepipelines/templates/defaults.yml).
+
## Building with Pytools for ArmVirtPkg
If you are unfamiliar with Pytools, it is recommended to first read through
@@ -57,16 +72,16 @@ the generic set of edk2 [Build
Instructions](https://github.com/tianocore/tianoc
pip install --upgrade -r pip-requirements.txt
```
-4. Initialize & Update Submodules - only when submodules updated
+4. Initialize & Update Submodules - only when submodules updated (QEMU build
example)
``` bash
- stuart_setup -c ArmVirtPkg/PlatformCI/PlatformBuild.py
TOOL_CHAIN_TAG=<TOOL_CHAIN_TAG> -a <TARGET_ARCH>
+ stuart_setup -c ArmVirtPkg/PlatformCI/QemuBuild.py
TOOL_CHAIN_TAG=<TOOL_CHAIN_TAG> -a <TARGET_ARCH>
```
-5. Initialize & Update Dependencies - only as needed when ext_deps change
+5. Initialize & Update Dependencies - only as needed when ext_deps change
(QEMU build example)
``` bash
- stuart_update -c ArmVirtPkg/PlatformCI/PlatformBuild.py
TOOL_CHAIN_TAG=<TOOL_CHAIN_TAG> -a <TARGET_ARCH>
+ stuart_update -c ArmVirtPkg/PlatformCI/QemuBuild.py
TOOL_CHAIN_TAG=<TOOL_CHAIN_TAG> -a <TARGET_ARCH>
```
6. Compile the basetools if necessary - only when basetools C source files
change
@@ -75,13 +90,13 @@ the generic set of edk2 [Build
Instructions](https://github.com/tianocore/tianoc
python BaseTools/Edk2ToolsBuild.py -t <ToolChainTag>
```
-7. Compile Firmware
+7. Compile Firmware (QEMU build example)
``` bash
- stuart_build -c ArmVirtPkg/PlatformCI/PlatformBuild.py
TOOL_CHAIN_TAG=<TOOL_CHAIN_TAG> -a <TARGET_ARCH>
+ stuart_build -c ArmVirtPkg/PlatformCI/QemuBuild.py
TOOL_CHAIN_TAG=<TOOL_CHAIN_TAG> -a <TARGET_ARCH>
```
- - use `stuart_build -c ArmVirtPkg/PlatformCI/PlatformBuild.py -h` option
to see additional
+ - use `stuart_build -c ArmVirtPkg/PlatformCI/QemuBuild.py -h` option to
see additional
options like `--clean`
8. Running Emulator
@@ -90,7 +105,7 @@ the generic set of edk2 [Build
Instructions](https://github.com/tianocore/tianoc
- or use the `--FlashOnly` feature to just run the emulator.
``` bash
- stuart_build -c ArmVirtPkg/PlatformCI/PlatformBuild.py
TOOL_CHAIN_TAG=<TOOL_CHAIN_TAG> -a <TARGET_ARCH> --FlashOnly
+ stuart_build -c ArmVirtPkg/PlatformCI/QemuBuild.py
TOOL_CHAIN_TAG=<TOOL_CHAIN_TAG> -a <TARGET_ARCH> --FlashOnly
```
### Notes
@@ -120,7 +135,7 @@ command-line. _stuart_build_ currently requires values to
be assigned, so add an
For example, to enable the TPM2 support, instead of the traditional "-D
TPM2_ENABLE=TRUE", the stuart_build
command-line would be:
-`stuart_build -c ArmVirtPkg/PlatformCI/PlatformBuild.py BLD_*_TPM2_ENABLE=TRUE`
+`stuart_build -c ArmVirtPkg/PlatformCI/QemuBuild.py BLD_*_TPM2_ENABLE=TRUE`
## References
--
2.42.0.windows.2
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110348): https://edk2.groups.io/g/devel/message/110348
Mute This Topic: https://groups.io/mt/102287336/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
