On 7/11/2023 7:36 AM, Nishant Sharma wrote:
From: Achin Gupta <achin.gu...@arm.com>
This patch adds support for discovering the presence of the SP using the
EFI_MM_COMMUNICATION_PROTOCOL GUID that implements Standalone MM
drivers. This is done by querying the framework through
FFA_PARTITION_INFO_GET whether any partition that implements the
EFI_MM_COMMUNICATION_PROTOCOL is present or not. The partition ID and
its properties are stashed for use in subsequent communication with the
StMM SP.
Signed-off-by: Achin Gupta <achin.gu...@arm.com>
Signed-off-by: Nishant Sharma <nishant.sha...@arm.com>
---
ArmPkg/Include/IndustryStandard/ArmFfaSvc.h | 24 +++++
ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.c | 93 +++++++++++++++++++-
2 files changed, 114 insertions(+), 3 deletions(-)
diff --git a/ArmPkg/Include/IndustryStandard/ArmFfaSvc.h
b/ArmPkg/Include/IndustryStandard/ArmFfaSvc.h
index f78442a465e1..530af8bd3c2e 100644
--- a/ArmPkg/Include/IndustryStandard/ArmFfaSvc.h
+++ b/ArmPkg/Include/IndustryStandard/ArmFfaSvc.h
@@ -19,6 +19,9 @@
#define ARM_SVC_ID_FFA_VERSION_AARCH32 0x84000063
#define ARM_SVC_ID_FFA_RXTX_MAP_AARCH32 0x84000066
#define ARM_SVC_ID_FFA_RXTX_MAP_AARCH64 0xC4000066
+#define ARM_SVC_ID_FFA_RX_RELEASE_AARCH32 0x84000065
+#define ARM_SVC_ID_FFA_RXTX_UNMAP_AARCH32 0x84000067
+#define ARM_SVC_ID_FFA_PARTITION_INFO_GET_AARCH32 0x84000068
#define ARM_SVC_ID_FFA_ID_GET_AARCH32 0x84000069
#define ARM_SVC_ID_FFA_MSG_SEND_DIRECT_REQ_AARCH32 0x8400006F
#define ARM_SVC_ID_FFA_MSG_SEND_DIRECT_RESP_AARCH32 0x84000070
@@ -154,4 +157,25 @@ typedef struct {
UINT64 Reserved;
} EFI_FFA_BOOT_INFO_HEADER;
+// FF-A partition information descriptor
+typedef struct {
+ UINT16 PartId;
+ UINT16 EcCnt;
+ UINT32 PartProps;
+ UINT32 PartGuid[4];
+} EFI_FFA_PART_INFO_DESC;
+
+#define PART_INFO_PROP_MASK 0x3f
+#define PART_INFO_PROP_SHIFT 0
+#define PART_INFO_PROP_DIR_MSG_RECV_BIT (1u << 0)
+#define PART_INFO_PROP_DIR_MSG_SEND_BIT (1u << 1)
+#define PART_INFO_PROP_INDIR_MSG_BIT (1u << 2)
+#define PART_INFO_PROP_NOTIFICATIONS_BIT (1u << 3)
+#define PART_INFO_PROP_EP_TYPE_MASK 0x3
+#define PART_INFO_PROP_EP_TYPE_SHIFT 4
+#define PART_INFO_PROP_EP_PE 0
+#define PART_INFO_PROP_EP_SEPID_IND 1
+#define PART_INFO_PROP_EP_SEPID_DEP 2
+#define PART_INFO_PROP_EP_AUX 3
+
#endif // ARM_FFA_SVC_H_
diff --git a/ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.c
b/ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.c
index 39a1b329b9ea..94a5d96c051d 100644
--- a/ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.c
+++ b/ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.c
@@ -8,6 +8,7 @@
#include <Library/ArmLib.h>
#include <Library/ArmSmcLib.h>
+#include <Library/BaseLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/DebugLib.h>
#include <Library/DxeServicesTableLib.h>
@@ -28,6 +29,11 @@
//
STATIC UINT16 mFfaPartId;
+// Partition information of the StMM SP if FF-A support is enabled
+// TODO: Revisit assumption that there is only a single StMM SP
+//
+STATIC EFI_FFA_PART_INFO_DESC mStmmPartInfo;
+
//
// RX/TX pair if FF-A support is enabled
//
@@ -298,7 +304,9 @@ GetMmCompatibility (
{
EFI_STATUS Status;
UINT32 MmVersion;
+ UINT32 SmccUuid[4];
ARM_SMC_ARGS SmcArgs = {0};
+ EFI_GUID MmCommProtGuid = EFI_MM_COMMUNICATION_PROTOCOL_GUID;
if (FixedPcdGet32 (PcdFfaEnable) != 0) {
SmcArgs.Arg0 = ARM_SVC_ID_FFA_VERSION_AARCH32;
@@ -335,14 +343,21 @@ GetMmCompatibility (
Status = EFI_UNSUPPORTED;
}
- // If FF-A is supported then discover our ID and register our RX/TX buffers.
+ // If FF-A is supported then discover the StMM SP's presence, ID, our ID and
+ // register our RX/TX buffers.
if (FixedPcdGet32 (PcdFfaEnable) != 0) {
+ EFI_FFA_PART_INFO_DESC *StmmPartInfo;
+
// Get our ID
ZeroMem(&SmcArgs, sizeof(SmcArgs));
SmcArgs.Arg0 = ARM_SVC_ID_FFA_ID_GET_AARCH32;
ArmCallSmc (&SmcArgs);
if (SmcArgs.Arg0 == ARM_SVC_ID_FFA_ERROR_AARCH32) {
- DEBUG ((DEBUG_ERROR, "Unable to retrieve FF-A partition ID (%d).\n",
SmcArgs.Arg2));
+ DEBUG ((
+ DEBUG_ERROR,
+ "Unable to retrieve FF-A partition ID (%d).\n",
+ SmcArgs.Arg2
+ ));
return EFI_UNSUPPORTED;
}
DEBUG ((DEBUG_INFO, "FF-A partition ID = 0x%lx.\n", SmcArgs.Arg2));
@@ -355,11 +370,83 @@ GetMmCompatibility (
SmcArgs.Arg3 = EFI_PAGE_SIZE / SIZE_4KB;
ArmCallSmc (&SmcArgs);
if (SmcArgs.Arg0 == ARM_SVC_ID_FFA_ERROR_AARCH32) {
- DEBUG ((DEBUG_ERROR, "Unable to register FF-A RX/TX buffers (%d).\n",
SmcArgs.Arg2));
+ DEBUG ((
+ DEBUG_ERROR,
+ "Unable to register FF-A RX/TX buffers (%d).\n",
+ SmcArgs.Arg2
+ ));
return EFI_UNSUPPORTED;
}
+ // Discover the StMM SP after converting the EFI_GUID to a format TF-A will
+ // understand.
+ SmcArgs.Arg0 = ARM_SVC_ID_FFA_PARTITION_INFO_GET_AARCH32;
+ MmCommProtGuid.Data2 += MmCommProtGuid.Data3;
+ MmCommProtGuid.Data3 = MmCommProtGuid.Data2 - MmCommProtGuid.Data3;
+ MmCommProtGuid.Data2 = MmCommProtGuid.Data2 - MmCommProtGuid.Data3;
+ CopyMem ((VOID *) SmccUuid, (VOID *) &MmCommProtGuid, sizeof(EFI_GUID));
+ SmcArgs.Arg1 = SmccUuid[0];
+ SmcArgs.Arg2 = SmccUuid[1];
+ SmcArgs.Arg3 = SmccUuid[2];
+ SmcArgs.Arg3 = SwapBytes32(SmcArgs.Arg3);
+ SmcArgs.Arg4 = SmccUuid[3];
+ SmcArgs.Arg4 = SwapBytes32(SmcArgs.Arg4);
+ ArmCallSmc (&SmcArgs);
+ if (SmcArgs.Arg0 == ARM_SVC_ID_FFA_ERROR_AARCH32) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "Unable to discover FF-A StMM SP (%d).\n",
+ SmcArgs.Arg2
+ ));
+ goto ffa_init_error;
+ }
+
+ // Retrieve the partition information from the RX buffer
+ StmmPartInfo = (EFI_FFA_PART_INFO_DESC *) FfaRxBuf;
+
+ // TODO: Sanity check the partition type.
+ DEBUG ((DEBUG_INFO, "Discovered FF-A StMM SP."));
+ DEBUG ((
+ DEBUG_INFO,
+ "ID = 0x%lx, Execution contexts = %d, Properties = 0x%lx. \n",
+ StmmPartInfo->PartId,
+ StmmPartInfo->EcCnt,
+ StmmPartInfo->PartProps
+ ));
+
+ // Make a local copy
+ mStmmPartInfo = *StmmPartInfo;
+
+ // Release the RX buffer
+ ZeroMem(&SmcArgs, sizeof(SmcArgs));
+ SmcArgs.Arg0 = ARM_SVC_ID_FFA_RX_RELEASE_AARCH32;
+ SmcArgs.Arg1 = mFfaPartId;
+ ArmCallSmc (&SmcArgs);
+
+ // This should really never fail since there is only a single CPU booting
+ // and another CPU could not have released the RX buffer before us.
+ if (SmcArgs.Arg0 == ARM_SVC_ID_FFA_ERROR_AARCH32) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "Unable to release FF-A RX buffer (%d).\n",
+ SmcArgs.Arg2
+ ));
+ ASSERT (0);
+ goto ffa_init_error;
+ }
+
return EFI_SUCCESS;
+
+ ffa_init_error:
+ // Release the RX/TX pair before exiting.
+ ZeroMem(&SmcArgs, sizeof(SmcArgs));
+ SmcArgs.Arg0 = ARM_SVC_ID_FFA_RXTX_UNMAP_AARCH32;
+ SmcArgs.Arg1 = mFfaPartId << 16; // TODO: Use a macro for shift
This macro would be nice to have, especially as the next patch uses it a
lot.
Thanks,
Oliver
+ ArmCallSmc (&SmcArgs);
+
+ // We do not bother checking the error code of the RXTX_UNMAP invocation
+ // since we did map the buffers and this call must succeed.
+ return EFI_UNSUPPORTED;
}
return Status;
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#106884): https://edk2.groups.io/g/devel/message/106884
Mute This Topic: https://groups.io/mt/100079892/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
