From: Achin Gupta <achin.gu...@arm.com>
This patch uses the FFA_MEM_PERM_GET/SET ABIs to tweak the permissions of a
set of pages if FF-A v1.1 and above is supported by the SPMC. For FF-A v1.0
the previous method through FFA_MSG_SEND_DIRECT_REQ/RESP is used.
Signed-off-by: Achin Gupta <achin.gu...@arm.com>
Signed-off-by: Nishant Sharma <nishant.sha...@arm.com>
---
ArmPkg/Include/IndustryStandard/ArmFfaSvc.h | 2 +
ArmPkg/Library/StandaloneMmMmuLib/ArmMmuStandaloneMmLib.c | 132
+++++++++++++++++---
2 files changed, 120 insertions(+), 14 deletions(-)
diff --git a/ArmPkg/Include/IndustryStandard/ArmFfaSvc.h
b/ArmPkg/Include/IndustryStandard/ArmFfaSvc.h
index c80d783fad3f..7987678c996e 100644
--- a/ArmPkg/Include/IndustryStandard/ArmFfaSvc.h
+++ b/ArmPkg/Include/IndustryStandard/ArmFfaSvc.h
@@ -23,6 +23,8 @@
#define ARM_SVC_ID_FFA_MSG_SEND_DIRECT_RESP_AARCH64 0xC4000070
#define ARM_SVC_ID_FFA_SUCCESS_AARCH32 0x84000061
#define ARM_SVC_ID_FFA_SUCCESS_AARCH64 0xC4000061
+#define ARM_SVC_ID_FFA_MEM_PERM_SET_AARCH32 0x84000089
+#define ARM_SVC_ID_FFA_MEM_PERM_GET_AARCH32 0x84000088
#define ARM_SVC_ID_FFA_ERROR_AARCH32 0x84000060
#define ARM_SVC_ID_FFA_ERROR_AARCH64 0xC4000060
#define ARM_SVC_ID_FFA_MSG_WAIT_AARCH32 0x8400006B
diff --git a/ArmPkg/Library/StandaloneMmMmuLib/ArmMmuStandaloneMmLib.c
b/ArmPkg/Library/StandaloneMmMmuLib/ArmMmuStandaloneMmLib.c
index 1a41a289ef17..76ef214bcb85 100644
--- a/ArmPkg/Library/StandaloneMmMmuLib/ArmMmuStandaloneMmLib.c
+++ b/ArmPkg/Library/StandaloneMmMmuLib/ArmMmuStandaloneMmLib.c
@@ -25,6 +25,66 @@
#include <Library/DebugLib.h>
#include <Library/PcdLib.h>
+
+/**
+ Utility function to determine whether ABIs in FF-A v1.1 to set and get
+ memory permissions can be used. Ideally, this should be invoked once in the
+ library constructor and set a flag that can be used at runtime. However, the
+ StMM Core invokes this library before constructors are called and before the
+ StMM image itself is relocated.
+
+ @retval EFI_SUCCESS The availability of ABIs was correctly determined.
+ @retval Other value Software stack is misconfigured.
+
+**/
+STATIC
+BOOLEAN
+UseFfaMemPermAbis (
+ VOID
+ )
+{
+ ARM_SVC_ARGS SvcArgs;
+ UINT32 SpmcFfaVersion;
+ STATIC UINT16 SpmcMajorVer = 0;
+ STATIC UINT16 SpmcMinorVer = 0;
+
+ // Use prefetched version info. if either is not 0, then the version is
+ // already fetched.
+ if ((SpmcMajorVer | SpmcMinorVer) != 0) {
+ return (SpmcMajorVer == SPM_MAJOR_VERSION_FFA) && (SpmcMinorVer >=
SPM_MINOR_VERSION_FFA);
+ }
+
+ // Nothing to do if FF-A has not be enabled
+ if (FixedPcdGet32 (PcdFfaEnable) == 0) {
+ return FALSE;
+ }
+
+ // Prepare the message parameters.
+ ZeroMem (&SvcArgs, sizeof (ARM_SVC_ARGS));
+ SvcArgs.Arg0 = ARM_SVC_ID_FFA_VERSION_AARCH32;
+ SvcArgs.Arg1 = FFA_VERSION_COMPILED;
+
+ // Invoke the ABI
+ ArmCallSvc (&SvcArgs);
+
+ // Check if FF-A is supported and what version
+ SpmcFfaVersion = SvcArgs.Arg0;
+
+ // Damn! FF-A is not supported at all even though we specified v1.0 as our
+ // version. However, the feature flag has been turned on. This is a
+ // misconfigured software stack. So, return an error and assert in a debug
build.
+ if (SpmcFfaVersion == ARM_FFA_SPM_RET_NOT_SUPPORTED) {
+ ASSERT (0);
+ return FALSE;
+ }
+
+ SpmcMajorVer = (SpmcFfaVersion >> FFA_VERSION_MAJOR_SHIFT) &
FFA_VERSION_MAJOR_MASK;
+ SpmcMinorVer = (SpmcFfaVersion >> FFA_VERSION_MINOR_SHIFT) &
FFA_VERSION_MINOR_MASK;
+
+ return (SpmcMajorVer == SPM_MAJOR_VERSION_FFA) && (SpmcMinorVer >=
SPM_MINOR_VERSION_FFA);
+}
+
+
/** Send memory permission request to target.
@param [in, out] SvcArgs Pointer to SVC arguments to send. On
@@ -55,6 +115,36 @@ SendMemoryPermissionRequest (
ArmCallSvc (SvcArgs);
if (FixedPcdGet32 (PcdFfaEnable) != 0) {
+
+ // Check if FF-A memory permission ABIs were used.
+ if (UseFfaMemPermAbis()) {
+ switch (SvcArgs->Arg0) {
+
+ case ARM_SVC_ID_FFA_ERROR_AARCH32:
+ case ARM_SVC_ID_FFA_ERROR_AARCH64:
+ switch (SvcArgs->Arg2) {
+ case ARM_FFA_SPM_RET_INVALID_PARAMETERS:
+ return EFI_INVALID_PARAMETER;
+ case ARM_FFA_SPM_RET_NOT_SUPPORTED:
+ return EFI_UNSUPPORTED;
+ default:
+ // Undefined error code received.
+ ASSERT (0);
+ return EFI_INVALID_PARAMETER;
+ }
+
+ case ARM_SVC_ID_FFA_SUCCESS_AARCH32:
+ case ARM_SVC_ID_FFA_SUCCESS_AARCH64:
+ *RetVal = SvcArgs->Arg2;
+ return EFI_SUCCESS;
+
+ default:
+ // Undefined error code received.
+ ASSERT (0);
+ return EFI_INVALID_PARAMETER;
+ }
+ }
+
// Get/Set memory attributes is an atomic call, with
// StandaloneMm at S-EL0 being the caller and the SPM
// core being the callee. Thus there won't be a
@@ -164,12 +254,18 @@ GetMemoryPermissions (
// See [1], Section 13.5.5.1 MM_SP_MEMORY_ATTRIBUTES_GET_AARCH64.
ZeroMem (&SvcArgs, sizeof (ARM_SVC_ARGS));
if (FixedPcdGet32 (PcdFfaEnable) != 0) {
- // See [2], Section 10.2 FFA_MSG_SEND_DIRECT_REQ.
- SvcArgs.Arg0 = ARM_SVC_ID_FFA_MSG_SEND_DIRECT_REQ;
- SvcArgs.Arg1 = ARM_FFA_DESTINATION_ENDPOINT_ID;
- SvcArgs.Arg2 = 0;
- SvcArgs.Arg3 = ARM_SVC_ID_SP_GET_MEM_ATTRIBUTES;
- SvcArgs.Arg4 = BaseAddress;
+ // Check if FF-A memory permission ABIs can be used.
+ if (UseFfaMemPermAbis()) {
+ SvcArgs.Arg0 = ARM_SVC_ID_FFA_MEM_PERM_GET_AARCH32;
+ SvcArgs.Arg1 = BaseAddress;
+ } else {
+ // See [2], Section 10.2 FFA_MSG_SEND_DIRECT_REQ.
+ SvcArgs.Arg0 = ARM_SVC_ID_FFA_MSG_SEND_DIRECT_REQ;
+ SvcArgs.Arg1 = ARM_FFA_DESTINATION_ENDPOINT_ID;
+ SvcArgs.Arg2 = 0;
+ SvcArgs.Arg3 = ARM_SVC_ID_SP_GET_MEM_ATTRIBUTES;
+ SvcArgs.Arg4 = BaseAddress;
+ }
} else {
SvcArgs.Arg0 = ARM_SVC_ID_SP_GET_MEM_ATTRIBUTES;
SvcArgs.Arg1 = BaseAddress;
@@ -219,14 +315,22 @@ RequestMemoryPermissionChange (
// See [1], Section 13.5.5.2 MM_SP_MEMORY_ATTRIBUTES_SET_AARCH64.
ZeroMem (&SvcArgs, sizeof (ARM_SVC_ARGS));
if (FixedPcdGet32 (PcdFfaEnable) != 0) {
- // See [2], Section 10.2 FFA_MSG_SEND_DIRECT_REQ.
- SvcArgs.Arg0 = ARM_SVC_ID_FFA_MSG_SEND_DIRECT_REQ;
- SvcArgs.Arg1 = ARM_FFA_DESTINATION_ENDPOINT_ID;
- SvcArgs.Arg2 = 0;
- SvcArgs.Arg3 = ARM_SVC_ID_SP_SET_MEM_ATTRIBUTES;
- SvcArgs.Arg4 = BaseAddress;
- SvcArgs.Arg5 = EFI_SIZE_TO_PAGES (Length);
- SvcArgs.Arg6 = Permissions;
+ // Check if FF-A memory permission ABIs can be used.
+ if (UseFfaMemPermAbis()) {
+ SvcArgs.Arg0 = ARM_SVC_ID_FFA_MEM_PERM_SET_AARCH32;
+ SvcArgs.Arg1 = BaseAddress;
+ SvcArgs.Arg2 = EFI_SIZE_TO_PAGES (Length);
+ SvcArgs.Arg3 = Permissions;
+ } else {
+ // See [2], Section 10.2 FFA_MSG_SEND_DIRECT_REQ.
+ SvcArgs.Arg0 = ARM_SVC_ID_FFA_MSG_SEND_DIRECT_REQ;
+ SvcArgs.Arg1 = ARM_FFA_DESTINATION_ENDPOINT_ID;
+ SvcArgs.Arg2 = 0;
+ SvcArgs.Arg3 = ARM_SVC_ID_SP_SET_MEM_ATTRIBUTES;
+ SvcArgs.Arg4 = BaseAddress;
+ SvcArgs.Arg5 = EFI_SIZE_TO_PAGES (Length);
+ SvcArgs.Arg6 = Permissions;
+ }
} else {
SvcArgs.Arg0 = ARM_SVC_ID_SP_SET_MEM_ATTRIBUTES;
SvcArgs.Arg1 = BaseAddress;
--
2.34.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#106798): https://edk2.groups.io/g/devel/message/106798
Mute This Topic: https://groups.io/mt/100079878/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
