-----邮件原件-----
发件人: devel@edk2.groups.io <devel@edk2.groups.io> 代表 Kun Qin
发送时间: 2023年6月9日 4:45
收件人: devel@edk2.groups.io
抄送: Hao A Wu <hao.a...@intel.com>; Liming Gao
<gaolim...@byosoft.com.cn>; Jian J Wang <jian.j.w...@intel.com>; Ronny
Hansen <hansen.ro...@microsoft.com>; Shriram Masanamuthu
Chinnathurai <shrira...@microsoft.com>; Preshit Harlikar
<pharli...@microsoft.com>
主题: [edk2-devel] [PATCH v1 2/2] MdeModulePkg: Variable: Introduce MM
based variable read service in PEI
From: Kun Qin <ku...@microsoft.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4464
This change introduced the Standalone MM based variable read capability
in PEI phase for applicable platforms (such as ARM platforms).
Similar to the x86 counterpart, MM communicate PPI is used to request
variable information from Standalone MM environment.
Cc: Hao A Wu <hao.a...@intel.com>
Cc: Liming Gao <gaolim...@byosoft.com.cn>
Cc: Jian J Wang <jian.j.w...@intel.com>
Co-authored-by: Ronny Hansen <hansen.ro...@microsoft.com>
Co-authored-by: Shriram Masanamuthu Chinnathurai
<shrira...@microsoft.com>
Co-authored-by: Preshit Harlikar <pharli...@microsoft.com>
Signed-off-by: Kun Qin <ku...@microsoft.com>
---
MdeModulePkg/Universal/Variable/MmVariablePei/MmVariablePei.c |
381 ++++++++++++++++++++
MdeModulePkg/MdeModulePkg.dsc
| 1 +
MdeModulePkg/Universal/Variable/MmVariablePei/MmVariablePei.h |
134 +++++++
MdeModulePkg/Universal/Variable/MmVariablePei/MmVariablePei.inf |
43 +++
4 files changed, 559 insertions(+)
diff --git
a/MdeModulePkg/Universal/Variable/MmVariablePei/MmVariablePei.c
b/MdeModulePkg/Universal/Variable/MmVariablePei/MmVariablePei.c
new file mode 100644
index 000000000000..4f937e22e89e
--- /dev/null
+++ b/MdeModulePkg/Universal/Variable/MmVariablePei/MmVariablePei.c
@@ -0,0 +1,381 @@
+/** @file -- MmVariablePei.c
+ Provides interface for reading Secure System Variables during PEI.
+
+ Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) Microsoft Corporation.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#include "MmVariablePei.h"
+
+#define MM_VARIABLE_COMM_BUFFER_OFFSET
(SMM_COMMUNICATE_HEADER_SIZE +
SMM_VARIABLE_COMMUNICATE_HEADER_SIZE)
+
+//
+// Module globals
+//
+EFI_PEI_READ_ONLY_VARIABLE2_PPI mPeiSecureVariableRead = {
+ PeiMmGetVariable,
+ PeiMmGetNextVariableName
+};
+
+EFI_PEI_PPI_DESCRIPTOR mPeiMmVariablePpi = {
+ (EFI_PEI_PPI_DESCRIPTOR_PPI |
EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),
+ &gEfiPeiReadOnlyVariable2PpiGuid,
+ &mPeiSecureVariableRead
+};
+
+/**
+ Entry point of PEI Secure Variable read driver
+
+ @param FileHandle Handle of the file being invoked.
+ Type EFI_PEI_FILE_HANDLE is defined in
FfsFindNextFile().
+ @param PeiServices General purpose services available to every
PEIM.
+
+ @retval EFI_SUCCESS If the interface could be successfully installed
+ @retval Others Returned from PeiServicesInstallPpi()
+**/
+EFI_STATUS
+EFIAPI
+PeiMmVariableInitialize (
+ IN EFI_PEI_FILE_HANDLE FileHandle,
+ IN CONST EFI_PEI_SERVICES **PeiServices
+ )
+{
+ return PeiServicesInstallPpi (&mPeiMmVariablePpi);
+}
+
+/**
+ Helper function to populate MM communicate header and variable
communicate header
+ and then communicate to PEI.
+
+ @param[in, out] CommunicateBuffer Size of the variable name.
+ @param[in] CommunicateBufferSize The entire buffer size to be
sent to MM.
+ @param[in] Function The MM variable function
value.
+
+ @retval EFI_INVALID_PARAMETER Invalid parameter.
+ @retval EFI_SUCCESS Find the specified variable.
+ @retval Others Errors returned by MM
communicate or variable service.
+
+**/
+EFI_STATUS
+PopulateHeaderAndCommunicate (
+ IN OUT UINT8 *CommunicateBuffer,
+ IN UINTN CommunicateBufferSize,
+ IN UINTN Function
+ )
+{
+ EFI_STATUS Status;
+ EFI_PEI_MM_COMMUNICATION_PPI *MmCommunicationPpi;
+ EFI_MM_COMMUNICATE_HEADER *MmCommunicateHeader;
+ SMM_VARIABLE_COMMUNICATE_HEADER *MmVarCommsHeader;
+
+ // Minimal sanity check
+ if ((CommunicateBuffer == NULL) ||
+ (CommunicateBufferSize <
MM_VARIABLE_COMM_BUFFER_OFFSET))
+ {
+ Status = EFI_INVALID_PARAMETER;
+ DEBUG ((DEBUG_ERROR, "%a: Invalid incoming parameters: %p and
0x%x\n", __func__, CommunicateBuffer, CommunicateBufferSize));
+ goto Exit;
+ }
+
+ if ((Function !=
SMM_VARIABLE_FUNCTION_GET_NEXT_VARIABLE_NAME) &&
+ (Function != SMM_VARIABLE_FUNCTION_GET_VARIABLE))
+ {
+ Status = EFI_INVALID_PARAMETER;
+ DEBUG ((DEBUG_ERROR, "%a: Invalid function value: 0x%x\n",
__func__, Function));
+ goto Exit;
+ }
+
+ Status = PeiServicesLocatePpi (&gEfiPeiMmCommunicationPpiGuid, 0,
NULL, (VOID **)&MmCommunicationPpi);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: Failed to locate PEI MM Communication
PPI: %r\n", __func__, Status));
+ goto Exit;
+ }
+
+ // Zero the entire Communication Buffer Header
+ MmCommunicateHeader = (EFI_MM_COMMUNICATE_HEADER
*)CommunicateBuffer;
+
+ ZeroMem (MmCommunicateHeader,
SMM_COMMUNICATE_HEADER_SIZE);
+
+ // Use gEfiSmmVariableProtocolGuid to request the MM variable service
in Standalone MM
+ CopyMem ((VOID *)&MmCommunicateHeader->HeaderGuid,
&gEfiSmmVariableProtocolGuid, sizeof (GUID));
+
+ // Program the MM header size
+ MmCommunicateHeader->MessageLength = CommunicateBufferSize -
SMM_COMMUNICATE_HEADER_SIZE;
+
+ MmVarCommsHeader = (SMM_VARIABLE_COMMUNICATE_HEADER
*)(CommunicateBuffer + SMM_COMMUNICATE_HEADER_SIZE);
+
+ // We are only supporting GetVariable and GetNextVariableName
+ MmVarCommsHeader->Function = Function;
+
+ // Send the MM request using MmCommunicationPei
+ Status = MmCommunicationPpi->Communicate (MmCommunicationPpi,
CommunicateBuffer, &CommunicateBufferSize);
+ if (EFI_ERROR (Status)) {
+ // Received an error from MM interface.
+ DEBUG ((DEBUG_ERROR, "%a - MM Interface Error: %r\n", __func__,
Status));
+ goto Exit;
+ }
+
+ // MM request was successfully handled by the framework.
+ // Set status to the Variable Service Status Code
+ Status = MmVarCommsHeader->ReturnStatus;
+ if (EFI_ERROR (Status)) {
+ // We received an error from Variable Service.
+ // We cant do anymore so return Status
+ if (Status != EFI_BUFFER_TOO_SMALL) {
+ DEBUG ((DEBUG_ERROR, "%a - Variable Service Error: %r\n",
__func__, Status));
+ }
+
+ goto Exit;
+ }
+
+Exit:
+ return Status;
+}
+
+/**
+ This service retrieves a variable's value using its name and GUID.
+
+ This function is using the Secure Variable Store. If the Data
+ buffer is too small to hold the contents of the variable, the error
+ EFI_BUFFER_TOO_SMALL is returned and DataSize is set to the required
buffer
+ size to obtain the data.
+
+ @param This A pointer to this instance of the
EFI_PEI_READ_ONLY_VARIABLE2_PPI.
+ @param VariableName A pointer to a null-terminated string
that is the variable's name.
+ @param VariableGuid A pointer to an EFI_GUID that is the
variable's GUID. The combination of
+ VariableGuid and VariableName
must be unique.
+ @param Attributes If non-NULL, on return, points to the
variable's attributes.
+ @param DataSize On entry, points to the size in bytes
of the Data buffer.
+ On return, points to the size of the
data returned in Data.
+ @param Data Points to the buffer which will hold
the returned variable value.
+ May be NULL with a zero DataSize in
order to determine the size of the buffer needed.
+
+ @retval EFI_SUCCESS The variable was read successfully.
+ @retval EFI_NOT_FOUND The variable was not found.
+ @retval EFI_BUFFER_TOO_SMALL The DataSize is too small for the
resulting data.
+ DataSize is updated with the size
required for
+ the specified variable.
+ @retval EFI_INVALID_PARAMETER VariableName, VariableGuid, DataSize
or Data is NULL.
+ @retval EFI_DEVICE_ERROR The variable could not be retrieved
because of a device error.
+
+**/
+EFI_STATUS
+EFIAPI
+PeiMmGetVariable (
+ IN CONST EFI_PEI_READ_ONLY_VARIABLE2_PPI *This,
+ IN CONST CHAR16 *VariableName,
+ IN CONST EFI_GUID *VariableGuid,
+ OUT UINT32 *Attributes, OPTIONAL
+ IN OUT UINTN *DataSize,
+ OUT VOID *Data OPTIONAL
+ )
+{
+ EFI_STATUS Status;
+ UINTN MessageSize;
+ SMM_VARIABLE_COMMUNICATE_ACCESS_VARIABLE
*MmVarAccessHeader;
+ UINT8
*MmCommunicateBuffer;
+ UINTN RequiredPages;
+
+ // Check input parameters
+ if ((VariableName == NULL) || (VariableGuid == NULL) || (DataSize ==
NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (VariableName[0] == 0) {
+ return EFI_NOT_FOUND;
+ }
+
+ if ((*DataSize > 0) && (Data == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Allocate required pages to send MM request
+ MessageSize = MM_VARIABLE_COMM_BUFFER_OFFSET +
+ OFFSET_OF
(SMM_VARIABLE_COMMUNICATE_ACCESS_VARIABLE, Name) +
+ StrSize (VariableName) + *DataSize;
+
+ RequiredPages = EFI_SIZE_TO_PAGES (MessageSize);
+ MmCommunicateBuffer = (UINT8 *)AllocatePages (RequiredPages);
+
+ if (MmCommunicateBuffer == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ DEBUG ((DEBUG_ERROR, "%a: Failed to allocate memory: %r\n",
__func__, Status));
+ return Status;
+ }
+
+ // Zero the entire Communication Buffer
+ ZeroMem (MmCommunicateBuffer, (RequiredPages * EFI_PAGE_SIZE));
+
+ //
+ // Program all payload structure contents
+ //
+ MmVarAccessHeader =
(SMM_VARIABLE_COMMUNICATE_ACCESS_VARIABLE
*)(MmCommunicateBuffer + MM_VARIABLE_COMM_BUFFER_OFFSET);
+
+ // Variable GUID
+ CopyMem ((VOID *)&MmVarAccessHeader->Guid, VariableGuid, sizeof
(GUID));
+
+ // Program the max amount of data we accept.
+ MmVarAccessHeader->DataSize = *DataSize;
+
+ // Get size of the variable name
+ MmVarAccessHeader->NameSize = StrSize (VariableName);
+
+ // Populate incoming variable name
+ CopyMem ((VOID *)&MmVarAccessHeader->Name, VariableName,
MmVarAccessHeader->NameSize);
+
+ Status = PopulateHeaderAndCommunicate (MmCommunicateBuffer,
MessageSize, SMM_VARIABLE_FUNCTION_GET_VARIABLE);
+ if (EFI_ERROR (Status)) {
+ // We received an error from either communicate or Variable Service.
+ if (Status != EFI_BUFFER_TOO_SMALL) {
+ DEBUG ((DEBUG_ERROR, "%a - Communite to MM for variable
service errored: %r\n", __func__, Status));
+ }
+
+ goto Exit;
+ }
+
+ Status = EFI_SUCCESS;
+
+ // User provided buffer is too small
+ if (*DataSize < MmVarAccessHeader->DataSize) {
+ Status = EFI_BUFFER_TOO_SMALL;
+ }
+
+Exit:
+ // Check if we need to set Attributes
+ if (Attributes != NULL) {
+ *Attributes = MmVarAccessHeader->Attributes;
+ }
+
+ *DataSize = MmVarAccessHeader->DataSize;
+
+ if (Status == EFI_SUCCESS) {
+ CopyMem ((VOID *)Data, (UINT8 *)MmVarAccessHeader->Name +
MmVarAccessHeader->NameSize, *DataSize);
+ }
+
+ // Free the Communication Buffer
+ if (MmCommunicateBuffer != NULL) {
+ FreePages (MmCommunicateBuffer, RequiredPages);
+ }
+
+ return Status;
+}
+
+/**
+ Return the next variable name and GUID.
+
+ This function is called multiple times to retrieve the VariableName
+ and VariableGuid of all variables currently available in the system.
+ On each call, the previous results are passed into the interface,
+ and, on return, the interface returns the data for the next
+ interface. When the entire variable list has been returned,
+ EFI_NOT_FOUND is returned.
+
+ @param This A pointer to this instance of the
EFI_PEI_READ_ONLY_VARIABLE2_PPI.
+
+ @param VariableNameSize On entry, points to the size of the buffer
pointed to by VariableName.
+ On return, the size of the variable name
buffer.
+ @param VariableName On entry, a pointer to a null-terminated
string that is the variable's name.
+ On return, points to the next variable's
null-terminated name string.
+
+ @param VariableGuid On entry, a pointer to an EFI_GUID that is
the variable's GUID.
+ On return, a pointer to the next variable's
GUID.
+
+ @retval EFI_SUCCESS The variable was read successfully.
+ @retval EFI_NOT_FOUND The variable could not be found.
+ @retval EFI_BUFFER_TOO_SMALL The VariableNameSize is too small
for the resulting
+ data. VariableNameSize is updated
with the size
+ required for the specified variable.
+ @retval EFI_INVALID_PARAMETER VariableName, VariableGuid or
+ VariableNameSize is NULL.
+ @retval EFI_DEVICE_ERROR The variable could not be retrieved
because of a device error.
+**/
+EFI_STATUS
+EFIAPI
+PeiMmGetNextVariableName (
+ IN CONST EFI_PEI_READ_ONLY_VARIABLE2_PPI *This,
+ IN OUT UINTN *VariableNameSize,
+ IN OUT CHAR16 *VariableName,
+ IN OUT EFI_GUID *VariableGuid
+ )
+{
+ EFI_STATUS Status;
+ UINTN
MessageSize;
+ UINT8
*MmCommunicateBuffer;
+ SMM_VARIABLE_COMMUNICATE_GET_NEXT_VARIABLE_NAME
*MmVarGetNextVarHeader;
+ UINTN
RequiredPages;
+
+ // Check input parameters
+ if ((VariableName == NULL) ||
+ (VariableGuid == NULL) ||
+ (VariableNameSize == NULL) ||
+ (*VariableNameSize == 0))
+ {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Allocate required pages to send MM request
+ MessageSize = MM_VARIABLE_COMM_BUFFER_OFFSET +
+ OFFSET_OF
(SMM_VARIABLE_COMMUNICATE_ACCESS_VARIABLE, Name) +
+ StrSize (VariableName) + *VariableNameSize;
+
+ RequiredPages = EFI_SIZE_TO_PAGES (MessageSize);
+ MmCommunicateBuffer = (UINT8 *)AllocatePages (RequiredPages);
+
+ if (MmCommunicateBuffer == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ DEBUG ((DEBUG_ERROR, "%a: Failed to allocate memory: %r\n",
__func__, Status));
+ return Status;
+ }
+
+ // Zero the entire Communication Buffer
+ ZeroMem (MmCommunicateBuffer, (RequiredPages * EFI_PAGE_SIZE));
+
+ //
+ // Program all payload structure contents
+ //
+ MmVarGetNextVarHeader =
(SMM_VARIABLE_COMMUNICATE_GET_NEXT_VARIABLE_NAME
*)(MmCommunicateBuffer + MM_VARIABLE_COMM_BUFFER_OFFSET);
+
+ // Variable GUID
+ CopyMem ((VOID *)&MmVarGetNextVarHeader->Guid, VariableGuid,
sizeof (GUID));
+
+ // Program the maximal length of name we can accept.
+ MmVarGetNextVarHeader->NameSize = *VariableNameSize;
+
+ // Populate incoming variable name
+ CopyMem ((VOID *)&MmVarGetNextVarHeader->Name, VariableName,
MmVarGetNextVarHeader->NameSize);
+
+ // Send the MM request using MmCommunicationPei
+ Status = PopulateHeaderAndCommunicate (MmCommunicateBuffer,
MessageSize, SMM_VARIABLE_FUNCTION_GET_NEXT_VARIABLE_NAME);
+ if (EFI_ERROR (Status)) {
+ // We received an error from either communicate or Variable Service.
+ if (Status != EFI_BUFFER_TOO_SMALL) {
+ DEBUG ((DEBUG_ERROR, "%a - Communite to MM for variable
service errored: %r\n", __func__, Status));
+ }
+
+ goto Exit;
+ }
+
+ Status = EFI_SUCCESS;
+
+ // User provided buffer is too small
+ if (*VariableNameSize < MmVarGetNextVarHeader->NameSize) {
+ Status = EFI_BUFFER_TOO_SMALL;
+ }
+
+Exit:
+ // Update the name size to be returned
+ *VariableNameSize = MmVarGetNextVarHeader->NameSize;
+
+ if (Status == EFI_SUCCESS) {
+ CopyMem ((VOID *)VariableName, (UINT8
*)MmVarGetNextVarHeader->Name, *VariableNameSize);
+ CopyMem ((VOID *)VariableGuid, (UINT8
*)&(MmVarGetNextVarHeader->Guid), sizeof (EFI_GUID));
+ }
+
+ // Free the Communication Buffer
+ if (MmCommunicateBuffer != NULL) {
+ FreePages (MmCommunicateBuffer, RequiredPages);
+ }
+
+ return Status;
+}
diff --git a/MdeModulePkg/MdeModulePkg.dsc
b/MdeModulePkg/MdeModulePkg.dsc
index 5b1f50e9c084..1aedfe280ae1 100644
--- a/MdeModulePkg/MdeModulePkg.dsc
+++ b/MdeModulePkg/MdeModulePkg.dsc
@@ -400,6 +400,7 @@ [Components]
MdeModulePkg/Application/VariableInfo/VariableInfo.inf
MdeModulePkg/Universal/FaultTolerantWritePei/FaultTolerantWritePei.inf
MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
+ MdeModulePkg/Universal/Variable/MmVariablePei/MmVariablePei.inf
MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
MdeModulePkg/Universal/TimestampDxe/TimestampDxe.inf
MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
diff --git
a/MdeModulePkg/Universal/Variable/MmVariablePei/MmVariablePei.h
b/MdeModulePkg/Universal/Variable/MmVariablePei/MmVariablePei.h
new file mode 100644
index 000000000000..0feed8cd1cb6
--- /dev/null
+++ b/MdeModulePkg/Universal/Variable/MmVariablePei/MmVariablePei.h
@@ -0,0 +1,134 @@
+/** @file -- MmVariablePei.h
+ Provides interface for reading Secure System Variables during PEI.
+
+ Copyright (c) Microsoft Corporation.
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef PEI_MM_VARIABLE_LIB_H_
+#define PEI_MM_VARIABLE_LIB_H_
+
+#include <PiPei.h>
+#include <Uefi/UefiSpec.h>
+
+#include <Library/DebugLib.h>
+#include <Library/PcdLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/PeimEntryPoint.h>
+#include <Library/PeiServicesLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/HobLib.h>
+
+#include <Guid/SmmVariableCommon.h>
+
+#include <Ppi/ReadOnlyVariable2.h>
+#include <Ppi/MmCommunication.h>
+
+#include <Protocol/SmmVariable.h>
+#include <Protocol/MmCommunication.h>
+
+/**
+ Entry point of PEI Secure Variable read driver
+
+ @param FileHandle Handle of the file being invoked.
+ Type EFI_PEI_FILE_HANDLE is defined in
FfsFindNextFile().
+ @param PeiServices General purpose services available to every
PEIM.
+
+ @retval EFI_SUCCESS If the interface could be successfully installed
+ @retval Others Returned from PeiServicesInstallPpi()
+**/
+EFI_STATUS
+EFIAPI
+PeiMmVariableInitialize (
+ IN EFI_PEI_FILE_HANDLE FileHandle,
+ IN CONST EFI_PEI_SERVICES **PeiServices
+ );
+
+/**
+
+ This function enables the read of Secure Variables during PEI.
+
+ This function is using the Secure Variable Store.If the Data
+ buffer is too small to hold the contents of the variable, the error
+ EFI_BUFFER_TOO_SMALL is returned and DataSize is set to the required
buffer
+ size to obtain the data.
+
+ The function performs the following:
+
+ 1) Creates an MM request
+ 2) Fills out the following data structures for the Secure Variable
+
SMM_VARIABLE_COMMUNICATE_HEADER/SMM_VARIABLE_COMMUNICAT
E_ACCESS_VARIABLE
+ 3) Adds the MM data structures to the MM request.
+ 4) Sends the MM request to EL3 using MmCommunicationPeiLib.
+ 5) The MM request is sent to S-EL0.
+ 6) The MM request is then handled by the registered handler with GUID:
gEfiSmmVariableProtocolGuid
+
+ @param This A pointer to this instance of the
EFI_PEI_READ_ONLY_VARIABLE2_PPI.
+ @param VariableName A pointer to a null-terminated string
that is the variable's name.
+ @param VariableGuid A pointer to an EFI_GUID that is the
variable's GUID. The combination of
+ VariableGuid and VariableName
must be unique.
+ @param Attributes If non-NULL, on return, points to the
variable's attributes.
+ @param DataSize On entry, points to the size in bytes
of the Data buffer.
+ On return, points to the size of the
data returned in Data.
+ @param Data Points to the buffer which will hold
the returned variable value.
+ May be NULL with a zero DataSize in
order to determine the size of the buffer needed.
+
+ @retval EFI_SUCCESS The variable was read successfully.
+ @retval EFI_NOT_FOUND The variable was not found.
+ @retval EFI_BUFFER_TOO_SMALL The DataSize is too small for the
resulting data.
+ DataSize is updated with the size
required for
+ the specified variable.
+ @retval EFI_INVALID_PARAMETER VariableName, VariableGuid, DataSize
or Data is NULL.
+ @retval EFI_DEVICE_ERROR The variable could not be retrieved
because of a device error.
+
+**/
+EFI_STATUS
+EFIAPI
+PeiMmGetVariable (
+ IN CONST EFI_PEI_READ_ONLY_VARIABLE2_PPI *This,
+ IN CONST CHAR16 *VariableName,
+ IN CONST EFI_GUID *VariableGuid,
+ OUT UINT32 *Attributes,
+ IN OUT UINTN *DataSize,
+ OUT VOID *Data OPTIONAL
+ );
+
+/**
+ Return the next variable name and GUID.
+
+ This function is called multiple times to retrieve the VariableName
+ and VariableGuid of all variables currently available in the system.
+ On each call, the previous results are passed into the interface,
+ and, on return, the interface returns the data for the next
+ interface. When the entire variable list has been returned,
+ EFI_NOT_FOUND is returned.
+
+ @param This A pointer to this instance of the
EFI_PEI_READ_ONLY_VARIABLE2_PPI.
+
+ @param VariableNameSize On entry, points to the size of the buffer
pointed to by VariableName.
+ On return, the size of the variable name
buffer.
+ @param VariableName On entry, a pointer to a null-terminated
string that is the variable's name.
+ On return, points to the next variable's
null-terminated name string.
+
+ @param VariableGuid On entry, a pointer to an EFI_GUID that is
the variable's GUID.
+ On return, a pointer to the next variable's
GUID.
+
+ @retval EFI_SUCCESS The variable was read successfully.
+ @retval EFI_NOT_FOUND The variable could not be found.
+ @retval EFI_BUFFER_TOO_SMALL The VariableNameSize is too small
for the resulting
+ data. VariableNameSize is updated
with the size
+ required for the specified variable.
+ @retval EFI_INVALID_PARAMETER VariableName, VariableGuid or
+ VariableNameSize is NULL.
+ @retval EFI_DEVICE_ERROR The variable could not be retrieved
because of a device error.
+**/
+EFI_STATUS
+EFIAPI
+PeiMmGetNextVariableName (
+ IN CONST EFI_PEI_READ_ONLY_VARIABLE2_PPI *This,
+ IN OUT UINTN *VariableNameSize,
+ IN OUT CHAR16 *VariableName,
+ IN OUT EFI_GUID *VariableGuid
+ );
+
+#endif /* PEI_MM_VARIABLE_LIB_H_ */
diff --git
a/MdeModulePkg/Universal/Variable/MmVariablePei/MmVariablePei.inf
b/MdeModulePkg/Universal/Variable/MmVariablePei/MmVariablePei.inf
new file mode 100644
index 000000000000..d122703e9b5d
--- /dev/null
+++ b/MdeModulePkg/Universal/Variable/MmVariablePei/MmVariablePei.inf
@@ -0,0 +1,43 @@
+## @file -- MmVariablePei.inf
+# Provides interface for reading Secure System Variables during PEI.
+#
+# Copyright (c) Microsoft Corporation.
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+##
+
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = MmVariablePei
+ FILE_GUID =
CD660A87-454B-4346-A35C-3D89BF8ECFAF
+ MODULE_TYPE = PEIM
+ VERSION_STRING = 1.0
+ ENTRY_POINT = PeiMmVariableInitialize
+
+[Sources]
+ MmVariablePei.c
+ MmVariablePei.h
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+
+[LibraryClasses]
+ PcdLib
+ PeiServicesLib
+ PeimEntryPoint
+ MemoryAllocationLib
+ HobLib
+
+[Pcd]
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize
+
+[Protocols]
+ gEfiSmmVariableProtocolGuid ## CONSUMES
+
+[Ppis]
+ gEfiPeiReadOnlyVariable2PpiGuid ## PRODUCES
+ gEfiPeiMmCommunicationPpiGuid ## CONSUMES
+
+[Depex]
+ gEfiPeiMmCommunicationPpiGuid
--
2.40.1.windows.1
-=-=-=-=-=-=
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#105956):
https://edk2.groups.io/g/devel/message/105956
Mute This Topic: https://groups.io/mt/99415826/4905953
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub
[gaolim...@byosoft.com.cn]
-=-=-=-=-=-=
