[AMD Official Use Only - General]
Reviewed-by: Abner Chang <abner.ch...@amd.com>
> -----Original Message-----
> From: Abdul Lateef Attar <abdat...@amd.com>
> Sent: Friday, March 17, 2023 2:50 PM
> To: devel@edk2.groups.io
> Cc: Attar, AbdulLateef (Abdul Lateef) <abdullateef.at...@amd.com>; Ard
> Biesheuvel <ardb+tianoc...@kernel.org>; Leif Lindholm
> <quic_llind...@quicinc.com>; Chang, Abner <abner.ch...@amd.com>;
> Michael D Kinney <michael.d.kin...@intel.com>
> Subject: [PATCH v2 RESEND 2/4] Platform/AMD/PlatformPkg: Adds
> PciHotPlug init protocol implementation
>
> Adds PCI hotplug init protocol implementation.
>
> Signed-off-by: Abdul Lateef Attar <abdat...@amd.com>
> Cc: Ard Biesheuvel <ardb+tianoc...@kernel.org>
> Cc: Leif Lindholm <quic_llind...@quicinc.com>
> Cc: Abner Chang <abner.ch...@amd.com>
> Cc: Michael D Kinney <michael.d.kin...@intel.com>
> ---
> Platform/AMD/PlatformPkg/PlatformPkg.dec | 16 +
> Platform/AMD/PlatformPkg/PlatformPkg.dsc | 23 ++
> .../PlatformPkg/PciHotPlug/PciHotPlugInit.inf | 41 +++
> .../PlatformPkg/PciHotPlug/PciHotPlugInit.c | 340 ++++++++++++++++++
> 4 files changed, 420 insertions(+)
> create mode 100644
> Platform/AMD/PlatformPkg/PciHotPlug/PciHotPlugInit.inf
> create mode 100644
> Platform/AMD/PlatformPkg/PciHotPlug/PciHotPlugInit.c
>
> diff --git a/Platform/AMD/PlatformPkg/PlatformPkg.dec
> b/Platform/AMD/PlatformPkg/PlatformPkg.dec
> index 6155860979cb..1bc38d6025c3 100644
> --- a/Platform/AMD/PlatformPkg/PlatformPkg.dec
> +++ b/Platform/AMD/PlatformPkg/PlatformPkg.dec
> @@ -13,3 +13,19 @@ [Defines]
> PACKAGE_NAME = PlatformPkg
> PACKAGE_GUID = 38FBA311-E2AA-4620-9A90-9A23753D1878
> PACKAGE_VERSION = 0.1
> +
> +[Guids]
> + gPlatformPkgTokenSpaceGuid = { 0x95ECA58D, 0x09B6, 0x4420, { 0xB4,
> 0xE7, 0x01, 0x7F, 0x6A, 0x5B, 0x26, 0x0F }}
> +
> +[PcdsDynamic, PcdsDynamicEx]
> + #
> + # PCI HotPlug Resource Padding
> + #
> + # IO Resource padding in bytes, default 4KB
> +
> +gPlatformPkgTokenSpaceGuid.PcdPciHotPlugResourcePadIO|0x00001000|
> UINT64
> +|0x10000000
> + # PreFetch Memory padding in bytes, default 2MB
> +
> +gPlatformPkgTokenSpaceGuid.PcdPciHotPlugResourcePadPMem|0x002000
> 00|UINT
> +64|0x10000001
> + # Non-PreFetch Memory padding in bytes, default 1MB
> +
> +gPlatformPkgTokenSpaceGuid.PcdPciHotPlugResourcePadMem|0x0010000
> 0|UINT6
> +4|0x10000002
> + # PCI bus padding, number of bus to reserve, default 2 bus
> +
> +gPlatformPkgTokenSpaceGuid.PcdPciHotPlugResourcePadBus|2|UINT8|0x
> 100000
> +03
> diff --git a/Platform/AMD/PlatformPkg/PlatformPkg.dsc
> b/Platform/AMD/PlatformPkg/PlatformPkg.dsc
> index 704566b9ea73..9a693070ab3f 100644
> --- a/Platform/AMD/PlatformPkg/PlatformPkg.dsc
> +++ b/Platform/AMD/PlatformPkg/PlatformPkg.dsc
> @@ -16,5 +16,28 @@ [Defines]
> BUILD_TARGETS = DEBUG | RELEASE | NOOPT
> SUPPORTED_ARCHITECTURES = IA32 | X64
>
> +
> [Packages]
> PlatformPkg/PlatformPkg.dec
> + MdeModulePkg/MdeModulePkg.dec
> + MdePkg/MdePkg.dec
> +
> +[LibraryClasses.Common]
> +
> +UefiDriverEntryPoint|MdePkg/Library/UefiDriverEntryPoint/UefiDriverEntr
> +yPoint.inf
> +
> +UefiBootServicesTableLib|MdePkg/Library/UefiBootServicesTableLib/UefiB
> o
> +otServicesTableLib.inf
> +
> +DebugLib|MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPor
> t.i
> +nf
> +
> +MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMem
> oryAl
> +locationLib.inf
> + BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
> + BaseLib|MdePkg/Library/BaseLib/BaseLib.inf
> + PcdLib|MdePkg/Library/DxePcdLib/DxePcdLib.inf
> +
> +RegisterFilterLib|MdePkg/Library/RegisterFilterLibNull/RegisterFilterLi
> +bNull.inf
> +
> +SerialPortLib|MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPo
> r
> +tLib16550.inf
> + PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf
> +
> +DebugPrintErrorLevelLib|MdePkg/Library/BaseDebugPrintErrorLevelLib/Ba
> se
> +DebugPrintErrorLevelLib.inf
> + IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf
> +
> +PlatformHookLib|MdeModulePkg/Library/BasePlatformHookLibNull/BasePl
> atfo
> +rmHookLibNull.inf
> + PciLib|MdePkg/Library/BasePciLibPciExpress/BasePciLibPciExpress.inf
> + PciExpressLib|MdePkg/Library/BasePciExpressLib/BasePciExpressLib.inf
> +
> +[Components.X64]
> + PlatformPkg/PciHotPlug/PciHotPlugInit.inf
> diff --git a/Platform/AMD/PlatformPkg/PciHotPlug/PciHotPlugInit.inf
> b/Platform/AMD/PlatformPkg/PciHotPlug/PciHotPlugInit.inf
> new file mode 100644
> index 000000000000..0079c4acf14e
> --- /dev/null
> +++ b/Platform/AMD/PlatformPkg/PciHotPlug/PciHotPlugInit.inf
> @@ -0,0 +1,41 @@
> +## @file
> +# This driver implements EFI_PCI_HOT_PLUG_INIT_PROTOCOL.
> +# Adds resource padding information, for PCIe hotplug purposes.
> +#
> +# Copyright (C) 2023 Advanced Micro Devices, Inc. All rights reserved #
> +SPDX-License-Identifier: BSD-2-Clause-Patent ##
> +
> +[Defines]
> + INF_VERSION = 1.29
> + BASE_NAME = PciHotPlugInit
> + FILE_GUID = 8B67D95F-78B7-484F-8F16-5F22AB388B0C
> + MODULE_TYPE = DXE_DRIVER
> + VERSION_STRING = 0.1
> + ENTRY_POINT = PciHotPlugInitialize
> +
> +[Sources]
> + PciHotPlugInit.c
> +
> +[Packages]
> + MdeModulePkg/MdeModulePkg.dec
> + MdePkg/MdePkg.dec
> + PlatformPkg/PlatformPkg.dec
> +
> +[LibraryClasses]
> + UefiDriverEntryPoint
> + UefiBootServicesTableLib
> + DebugLib
> + MemoryAllocationLib
> +
> +[Protocols]
> + gEfiPciHotPlugInitProtocolGuid
> +
> +[Pcd]
> + gPlatformPkgTokenSpaceGuid.PcdPciHotPlugResourcePadIO
> + gPlatformPkgTokenSpaceGuid.PcdPciHotPlugResourcePadPMem
> + gPlatformPkgTokenSpaceGuid.PcdPciHotPlugResourcePadMem
> + gPlatformPkgTokenSpaceGuid.PcdPciHotPlugResourcePadBus
> +
> +[Depex]
> + TRUE
> diff --git a/Platform/AMD/PlatformPkg/PciHotPlug/PciHotPlugInit.c
> b/Platform/AMD/PlatformPkg/PciHotPlug/PciHotPlugInit.c
> new file mode 100644
> index 000000000000..b977406bbcae
> --- /dev/null
> +++ b/Platform/AMD/PlatformPkg/PciHotPlug/PciHotPlugInit.c
> @@ -0,0 +1,340 @@
> +/** @file
> + This file declares EFI PCI Hot Plug Init Protocol.
> +
> + This protocol provides the necessary functionality to initialize the
> + Hot Plug Controllers (HPCs) and the buses that they control. This
> + protocol also provides information regarding resource padding.
> +
> + @par Note:
> + This source has the reference of OVMF PciHotPluginit.c and Intel platform
> PciHotPlug.c.
> +
> + This protocol is required only on platforms that support one or more PCI
> Hot
> + Plug* slots or CardBus sockets.
> +
> + The EFI_PCI_HOT_PLUG_INIT_PROTOCOL provides a mechanism for the
> PCI
> + bus enumerator to properly initialize the HPCs and CardBus sockets that
> require initialization.
> + The HPC initialization takes place before the PCI enumeration process is
> complete.
> + There cannot be more than one instance of this protocol in a system.
> + This protocol is installed on its own separate handle.
> +
> + Because the system may include multiple HPCs, one instance of this
> + protocol should represent all of them. The protocol functions use the
> + device path of the HPC to identify the HPC. When the PCI bus
> + enumerator finds a root HPC, it will call
> + EFI_PCI_HOT_PLUG_INIT_PROTOCOL.InitializeRootHpc(). If
> + InitializeRootHpc() is unable to initialize a root HPC, the PCI
> + enumerator will ignore that root HPC and continue the enumeration
> process. If the HPC is not initialized, the devices that it controls may not
> be
> initialized, and no resource padding will be provided.
> +
> + From the standpoint of the PCI bus enumerator, HPCs are divided into
> + the following two classes:
> +
> + - Root HPC:
> + These HPCs must be initialized by calling InitializeRootHpc() during
> the
> + enumeration process. These HPCs will also require resource padding.
> The
> + platform code must have a priori knowledge of these devices and must
> know
> + how to initialize them. There may not be any way to access their PCI
> + configuration space before the PCI enumerator programs all the
> upstream
> + bridges and thus enables the path to these devices. The PCI bus
> enumerator
> + is responsible for determining the PCI bus address of the HPC before
> it
> + calls InitializeRootHpc().
> + - Nonroot HPC:
> + These HPCs will not need explicit initialization during enumeration
> process.
> + These HPCs will require resource padding. The platform code does not
> have
> + to have a priori knowledge of these devices.
> +
> + Copyright (c) 2007 - 2018, Intel Corporation. All rights
> + reserved.<BR> Copyright (C) 2016, Red Hat, Inc.<BR> Copyright (C)
> + 2023 Advanced Micro Devices, Inc. All rights reserved.<BR>
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> + @par Revision Reference:
> + This Protocol is defined in UEFI Platform Initialization
> + Specification 1.2 Volume 5: Standards
> +
> +**/
> +
> +#include <Uefi/UefiBaseType.h>
> +#include <Uefi/UefiSpec.h>
> +#include <Library/UefiBootServicesTableLib.h>
> +#include <Library/DebugLib.h>
> +#include <Library/MemoryAllocationLib.h> #include
> +<Protocol/PciHotPlugInit.h>
> +
> +//
> +// The protocol interface this driver produces.
> +//
> +STATIC EFI_PCI_HOT_PLUG_INIT_PROTOCOL mPciHotPlugInit;
> +
> +/**
> + Returns a list of root Hot Plug Controllers (HPCs) that require
> +initialization
> + during the boot process.
> +
> + This procedure returns a list of root HPCs. The PCI bus driver must
> + initialize these controllers during the boot process. The PCI bus
> + driver may or may not be able to detect these HPCs. If the platform
> + includes a PCI-to-CardBus bridge, it can be included in this list if
> + it requires initialization. The HpcList must be self consistent. An
> + HPC cannot control any of its parent buses. Only one HPC can control
> + a PCI bus. Because this list includes only root HPCs, no HPC in the list
> can be
> a child of another HPC. This policy must be enforced by the
> + EFI_PCI_HOT_PLUG_INIT_PROTOCOL. The PCI bus driver may not check
> for such
> + invalid conditions. The callee allocates the buffer HpcList
> +
> + @param[in] This Pointer to the EFI_PCI_HOT_PLUG_INIT_PROTOCOL
> instance.
> + @param[out] HpcCount The number of root HPCs that were returned.
> + @param[out] HpcList The list of root HPCs. HpcCount defines the number
> of
> + elements in this list.
> +
> + @retval EFI_SUCCESS HpcList was returned.
> + @retval EFI_OUT_OF_RESOURCES HpcList was not returned due to
> insufficient
> + resources.
> + @retval EFI_INVALID_PARAMETER HpcCount is NULL or HpcList is NULL.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +GetRootHpcList (
> + IN EFI_PCI_HOT_PLUG_INIT_PROTOCOL *This,
> + OUT UINTN *HpcCount,
> + OUT EFI_HPC_LOCATION **HpcList
> + )
> +{
> + if ((HpcCount == NULL) || (HpcList == NULL)) {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + //
> + // Platform BIOS not doing any extra/special HPC initialization //
> + Hence returning the HpcCount as zero and HpcList as NULL //
> + *HpcCount = 0; *HpcList = NULL;
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Initializes one root Hot Plug Controller (HPC). This process may
> +causes
> + initialization of its subordinate buses.
> +
> + This function initializes the specified HPC. At the end of
> + initialization, the hot-plug slots or sockets (controlled by this
> + HPC) are powered and are connected to the bus. All the necessary
> + registers in the HPC are set up. For a Standard (PCI) Hot Plug
> + Controller (SHPC), the registers that must be set up are defined in
> + the PCI Standard Hot Plug Controller and Subsystem Specification.
> +
> + @param[in] This Pointer to the
> EFI_PCI_HOT_PLUG_INIT_PROTOCOL instance.
> + @param[in] HpcDevicePath The device path to the HPC that is being
> initialized.
> + @param[in] HpcPciAddress The address of the HPC function on the PCI
> bus.
> + @param[in] Event The event that should be signaled when the HPC
> + initialization is complete. Set to NULL if the
> + caller wants to wait until the entire
> initialization
> + process is complete.
> + @param[out] HpcState The state of the HPC hardware. The state is
> + EFI_HPC_STATE_INITIALIZED or
> EFI_HPC_STATE_ENABLED.
> +
> + @retval EFI_SUCCESS If Event is NULL, the specific HPC was
> successfully
> + initialized. If Event is not NULL, Event
> will be
> + signaled at a later time when
> initialization is complete.
> + @retval EFI_UNSUPPORTED This instance of
> EFI_PCI_HOT_PLUG_INIT_PROTOCOL
> + does not support the specified HPC.
> + @retval EFI_OUT_OF_RESOURCES Initialization failed due to insufficient
> + resources.
> + @retval EFI_INVALID_PARAMETER HpcState is NULL.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +InitializeRootHpc (
> + IN EFI_PCI_HOT_PLUG_INIT_PROTOCOL *This,
> + IN EFI_DEVICE_PATH_PROTOCOL *HpcDevicePath,
> + IN UINT64 HpcPciAddress,
> + IN EFI_EVENT Event, OPTIONAL
> + OUT EFI_HPC_STATE *HpcState
> + )
> +{
> + if (HpcState == NULL) {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + //
> + // This Platform doesnt have any non-enumerated HPC.
> + // Hence no extra initialization required from Platform BIOS.
> + //
> + return EFI_UNSUPPORTED;
> +}
> +
> +/**
> + Returns the resource padding that is required by the PCI bus that is
> +controlled
> + by the specified Hot Plug Controller (HPC).
> +
> + This function returns the resource padding that is required by the
> + PCI bus that is controlled by the specified HPC. This member function
> + is called for all the root HPCs and nonroot HPCs that are detected by
> + the PCI bus enumerator. This function will be called before PCI
> + resource allocation is completed. This function must be called after
> + all the root HPCs, with the possible exception of a PCI-to-CardBus bridge,
> have completed initialization.
> +
> + @param[in] This Pointer to the
> EFI_PCI_HOT_PLUG_INIT_PROTOCOL instance.
> + @param[in] HpcDevicePath The device path to the HPC.
> + @param[in] HpcPciAddress The address of the HPC function on the PCI
> bus.
> + @param[out] HpcState The state of the HPC hardware.
> + @param[out] Padding The amount of resource padding that is
> required by the
> + PCI bus under the control of the specified HPC.
> + @param[out] Attributes Describes how padding is accounted for. The
> padding
> + is returned in the form of ACPI 2.0 resource
> descriptors.
> +
> + @retval EFI_SUCCESS The resource padding was successfully
> returned.
> + @retval EFI_UNSUPPORTED This instance of the
> EFI_PCI_HOT_PLUG_INIT_PROTOCOL
> + does not support the specified HPC.
> + @retval EFI_NOT_READY This function was called before HPC
> initialization
> + is complete.
> + @retval EFI_INVALID_PARAMETER HpcState or Padding or Attributes is
> NULL.
> + @retval EFI_OUT_OF_RESOURCES ACPI 2.0 resource descriptors for
> Padding
> + cannot be allocated due to insufficient
> resources.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +GetResourcePadding (
> + IN EFI_PCI_HOT_PLUG_INIT_PROTOCOL *This,
> + IN EFI_DEVICE_PATH_PROTOCOL *HpcDevicePath,
> + IN UINT64 HpcPciAddress,
> + OUT EFI_HPC_STATE *HpcState,
> + OUT VOID **Padding,
> + OUT EFI_HPC_PADDING_ATTRIBUTES *Attributes
> + )
> +{
> + EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *PaddingResource;
> +
> + //
> + // Need total 5 resources
> + // 1 - IO resource
> + // 2 - Mem resource
> + // 3 - PMem resource
> + // 4 - Bus resource
> + // 5 - end tag resource
> + PaddingResource = AllocateZeroPool (4 * sizeof
> + (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) + sizeof
> (EFI_ACPI_END_TAG_DESCRIPTOR)); if (PaddingResource == NULL) {
> + return EFI_OUT_OF_RESOURCES;
> + }
> +
> + *Padding = (VOID *)PaddingResource;
> +
> + //
> + // Padding for bus
> + //
> + *Attributes = EfiPaddingPciBus;
> +
> + PaddingResource->Desc = ACPI_ADDRESS_SPACE_DESCRIPTOR;
> + PaddingResource->Len = (UINT16)(
> + sizeof
> (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) -
> + OFFSET_OF (
> + EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR,
> + ResType
> + )
> + );
> + PaddingResource->ResType = ACPI_ADDRESS_SPACE_TYPE_BUS;
> + PaddingResource->GenFlag = 0x0;
> + PaddingResource->SpecificFlag = 0;
> + PaddingResource->AddrRangeMin = 0;
> + PaddingResource->AddrRangeMax = 0;
> + PaddingResource->AddrLen = PcdGet8 (PcdPciHotPlugResourcePadBus);
> +
> + //
> + // Padding for non-prefetchable memory // PaddingResource++;
> + PaddingResource->Desc = ACPI_ADDRESS_SPACE_DESCRIPTOR;
> + PaddingResource->Len = (UINT16)(
> + sizeof
> (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) -
> + OFFSET_OF (
> + EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR,
> + ResType
> + )
> + );
> + PaddingResource->ResType = ACPI_ADDRESS_SPACE_TYPE_MEM;
> + PaddingResource->GenFlag = 0x0;
> + PaddingResource->AddrSpaceGranularity = 32;
> + PaddingResource->SpecificFlag =
> EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_NON_CACHEABLE;
> + PaddingResource->AddrRangeMin = 0;
> + PaddingResource->AddrLen = PcdGet64
> (PcdPciHotPlugResourcePadMem);
> + PaddingResource->AddrRangeMax = PaddingResource->AddrLen - 1;
> +
> + //
> + // Padding for prefetchable memory
> + //
> + PaddingResource++;
> + PaddingResource->Desc = ACPI_ADDRESS_SPACE_DESCRIPTOR;
> + PaddingResource->Len = (UINT16)(
> + sizeof
> (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) -
> + OFFSET_OF (
> + EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR,
> + ResType
> + )
> + );
> + PaddingResource->ResType = ACPI_ADDRESS_SPACE_TYPE_MEM;
> + PaddingResource->GenFlag = 0x0;
> + PaddingResource->AddrSpaceGranularity = 32;
> + PaddingResource->SpecificFlag =
> EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_CACHEABLE_PREFETCHABL
> E;
> + PaddingResource->AddrLen = PcdGet64
> (PcdPciHotPlugResourcePadPMem);
> + PaddingResource->AddrRangeMax = PaddingResource->AddrLen - 1;
> +
> + //
> + // Padding for I/O
> + //
> + PaddingResource++;
> + PaddingResource->Desc = ACPI_ADDRESS_SPACE_DESCRIPTOR;
> + PaddingResource->Len = (UINT16)(
> + sizeof
> (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) -
> + OFFSET_OF (
> + EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR,
> + ResType
> + )
> + );
> + PaddingResource->ResType = ACPI_ADDRESS_SPACE_TYPE_IO;
> + PaddingResource->GenFlag = 0x0;
> + PaddingResource->SpecificFlag = 0;
> + PaddingResource->AddrRangeMin = 0;
> + PaddingResource->AddrLen = PcdGet64 (PcdPciHotPlugResourcePadIO);
> + PaddingResource->AddrRangeMax = PaddingResource->AddrLen - 1;
> +
> + //
> + // Terminate the entries.
> + //
> + PaddingResource++;
> + ((EFI_ACPI_END_TAG_DESCRIPTOR *)PaddingResource)->Desc =
> ACPI_END_TAG_DESCRIPTOR;
> + ((EFI_ACPI_END_TAG_DESCRIPTOR *)PaddingResource)->Checksum = 0x0;
> +
> + *HpcState = EFI_HPC_STATE_INITIALIZED | EFI_HPC_STATE_ENABLED;
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Entry point for this driver.
> +
> + @param[in] ImageHandle Image handle of this driver.
> + @param[in] SystemTable Pointer to SystemTable.
> +
> + @retval EFI_SUCESS Driver has loaded successfully.
> + @return Error codes from lower level functions.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +PciHotPlugInitialize (
> + IN EFI_HANDLE ImageHandle,
> + IN EFI_SYSTEM_TABLE *SystemTable
> + )
> +{
> + mPciHotPlugInit.GetRootHpcList = GetRootHpcList;
> + mPciHotPlugInit.InitializeRootHpc = InitializeRootHpc;
> + mPciHotPlugInit.GetResourcePadding = GetResourcePadding;
> + return gBS->InstallMultipleProtocolInterfaces (
> + &ImageHandle,
> + &gEfiPciHotPlugInitProtocolGuid,
> + &mPciHotPlugInit,
> + NULL
> + );
> +}
> --
> 2.25.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#101313): https://edk2.groups.io/g/devel/message/101313
Mute This Topic: https://groups.io/mt/97667943/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
