On Fri, 3 Feb 2023 at 12:20, Sudeep Holla <sudeep.ho...@arm.com> wrote:
>
> On Fri, Feb 03, 2023 at 12:10:38PM +0100, Pierre Gondois wrote:
> > Hello Sudeep,
> >
> > On 2/2/23 15:30, Sudeep Holla wrote:
> > > As per the SCMI specification, section CLOCK_DESCRIBE_RATES mentions that
> > > the value of num_rates_flags[11:0] in the response must be 3 if the return
> > > format is the triplet. Due to the buggy firmware, this was not noticed for
> > > long time. The firmware is now fixed resulting in ClockDescribeRates() to
> > > fail with "Buffer Too Small" error as the RequiredArraySize gets
> > > miscalculated
> > > as 72 instead of 24.
> > >
> > > Fix the issue by reusing the logic for both the return format which must
> > > work if num_rates_flags has correct value as expected from the
> > > specification.
> > >
> > > Cc: Pierre Gondois <pierre.gond...@arm.com>
> > > Cc: Girish Pathak <girish.pat...@arm.com>
> > > Cc: Jeff Brasen <jbra...@nvidia.com>
> > > Reported-by: Sami Mujawar <sami.muja...@arm.com>
> > > Signed-off-by: Sudeep Holla <sudeep.ho...@arm.com>
> > > ---
> > > ArmPkg/Drivers/ArmScmiDxe/ScmiClockProtocol.c | 7 +------
> > > 1 file changed, 1 insertion(+), 6 deletions(-)
> > >
> > > Hi All,
> > >
> > > Sorry for the resend, I hadn't subscribed before so resending after the
> > > subscription.
> > >
> > > Regards,
> > > Sudeep
> > >
> > > diff --git a/ArmPkg/Drivers/ArmScmiDxe/ScmiClockProtocol.c
> > > b/ArmPkg/Drivers/ArmScmiDxe/ScmiClockProtocol.c
> > > index 12a7e6df5d43..1412717bc227 100644
> > > --- a/ArmPkg/Drivers/ArmScmiDxe/ScmiClockProtocol.c
> > > +++ b/ArmPkg/Drivers/ArmScmiDxe/ScmiClockProtocol.c
> > > @@ -236,12 +236,7 @@ ClockDescribeRates (
> > > *TotalRates = NUM_RATES (DescribeRates->NumRatesFlags)
> > > + NUM_REMAIN_RATES (DescribeRates->NumRatesFlags);
> > > - if (*Format == ScmiClockRateFormatDiscrete) {
> > > - RequiredArraySize = (*TotalRates) * sizeof (UINT64);
> > > - } else {
> > > - // We need to return triplet of 64 bit value for each rate
> > > - RequiredArraySize = (*TotalRates) * 3 * sizeof (UINT64);
> > > - }
> > > + RequiredArraySize = (*TotalRates) * sizeof (UINT64);
> > > if (RequiredArraySize > (*RateArraySize)) {
> > > *RateArraySize = RequiredArraySize;
> >
> > I think the following also needs to be modified:
> > """
> > for (RateNo = 0; RateNo < NUM_RATES (DescribeRates->NumRatesFlags);
> > RateNo++) {
> > // Linear clock rates from minimum to maximum in steps
> > // Minimum clock rate.
> > Rate =
> > &DescribeRates->Rates[RateOffset++];
> > RateArray[RateIndex].ContinuousRate.Min =
> > ConvertTo64Bit (Rate->Low, Rate->High);
> >
> > Rate = &DescribeRates->Rates[RateOffset++];
> > // Maximum clock rate.
> > RateArray[RateIndex].ContinuousRate.Max =
> > ConvertTo64Bit (Rate->Low, Rate->High);
> >
> > Rate = &DescribeRates->Rates[RateOffset++];
> > // Step.
> > RateArray[RateIndex++].ContinuousRate.Step =
> > ConvertTo64Bit (Rate->Low, Rate->High);
> > }
> > """
> >
>
> Right, good catch. For some reason, I don't see any exceptions in release
> build :(. I will try the debug build and check. Thanks for the review.
> >
> > With the above loop removed:
> > Reviewed-by: Pierre Gondois <pierre.gond...@arm.com>
> > Tested-by: Pierre Gondois <pierre.gond...@arm.com>
> >
>
> Thanks!
>
Excellent. Could someone post the final version please?
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#99576): https://edk2.groups.io/g/devel/message/99576
Mute This Topic: https://groups.io/mt/96700745/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
