Pushed as 9822126, thank you.
On Thu, Jan 26, 2023 at 6:08 PM Pedro Falcato <pedro.falc...@gmail.com> wrote:
>
> On Thu, Jan 26, 2023 at 6:07 PM Marvin Häuser <mhaeu...@posteo.de> wrote:
> >
> > Fix typos discovered by SpellCheck, which were discovered as part of the
> > initial CI enablement effort.
> >
> > Cc: Pedro Falcato <pedro.falc...@gmail.com>
> > Signed-off-by: Marvin Häuser <mhaeu...@posteo.de>
> > ---
> > Features/Ext4Pkg/Ext4Dxe/BlockMap.c | 6 +++---
> > Features/Ext4Pkg/Ext4Dxe/Directory.c | 2 +-
> > Features/Ext4Pkg/Ext4Dxe/Ext4Dxe.h | 16 ++++++++--------
> > Features/Ext4Pkg/Ext4Dxe/Extents.c | 4 ++--
> > Features/Ext4Pkg/Ext4Dxe/File.c | 2 +-
> > Features/Ext4Pkg/Ext4Dxe/Inode.c | 2 +-
> > Features/Ext4Pkg/Ext4Dxe/Superblock.c | 6 +++---
> > Features/Ext4Pkg/Ext4Dxe/Symlink.c | 2 +-
> > 8 files changed, 20 insertions(+), 20 deletions(-)
> >
> > diff --git a/Features/Ext4Pkg/Ext4Dxe/BlockMap.c
> > b/Features/Ext4Pkg/Ext4Dxe/BlockMap.c
> > index 2bc629fe9d38..8fee4476a5ac 100644
> > --- a/Features/Ext4Pkg/Ext4Dxe/BlockMap.c
> > +++ b/Features/Ext4Pkg/Ext4Dxe/BlockMap.c
> > @@ -131,7 +131,7 @@ Ext4GetBlockPath (
> >
> > /**
> > @brief Get an extent from a block map
> > - Note: Also parses file holes and creates uninitialised extents from
> > them.
> > + Note: Also parses file holes and creates uninitialized extents from
> > them.
> >
> > @param[in] Buffer Buffer of block pointers
> > @param[in] IndEntries Number of entries in this block pointer
> > table
> > @@ -173,7 +173,7 @@ Ext4GetExtentInBlockMap (
> > }
> > }
> >
> > - // We mark the extent as uninitialised, although there's a difference
> > between uninit
> > + // We mark the extent as uninitialized, although there's a difference
> > between uninit
> > // extents and file holes.
> > Extent->ee_len = EXT4_EXTENT_MAX_INITIALIZED + Count;
> > return;
> > @@ -206,7 +206,7 @@ Ext4GetExtentInBlockMap (
> > @param[in] LogicalBlock Block number which the returned extent
> > must cover.
> > @param[out] Extent Pointer to the output buffer, where the
> > extent will be copied to.
> >
> > - @retval EFI_SUCCESS Retrieval was succesful.
> > + @retval EFI_SUCCESS Retrieval was successful.
> > @retval EFI_NO_MAPPING Block has no mapping.
> > **/
> > EFI_STATUS
> > diff --git a/Features/Ext4Pkg/Ext4Dxe/Directory.c
> > b/Features/Ext4Pkg/Ext4Dxe/Directory.c
> > index ba781bad968c..456916453952 100644
> > --- a/Features/Ext4Pkg/Ext4Dxe/Directory.c
> > +++ b/Features/Ext4Pkg/Ext4Dxe/Directory.c
> > @@ -16,7 +16,7 @@
> > @param[in] Entry Pointer to a EXT4_DIR_ENTRY.
> > @param[out] Ucs2FileName Pointer to an array of CHAR16's, of
> > size EXT4_NAME_MAX + 1.
> >
> > - @retval EFI_SUCCESS The filename was succesfully retrieved
> > and converted to UCS2.
> > + @retval EFI_SUCCESS The filename was successfully
> > retrieved and converted to UCS2.
> > @retval EFI_INVALID_PARAMETER The filename is not valid UTF-8.
> > @retval !EFI_SUCCESS Failure.
> > **/
> > diff --git a/Features/Ext4Pkg/Ext4Dxe/Ext4Dxe.h
> > b/Features/Ext4Pkg/Ext4Dxe/Ext4Dxe.h
> > index 41779dad855f..f608def7c9eb 100644
> > --- a/Features/Ext4Pkg/Ext4Dxe/Ext4Dxe.h
> > +++ b/Features/Ext4Pkg/Ext4Dxe/Ext4Dxe.h
> > @@ -155,7 +155,7 @@ Ext4UnrefDentry (
> >
> > @param[out] Partition Partition structure to fill with filesystem
> > details.
> > - @retval EFI_SUCCESS Parsing was succesful and the partition is a
> > + @retval EFI_SUCCESS Parsing was successful and the partition is a
> > valid ext4 partition.
> > **/
> > EFI_STATUS
> > @@ -322,7 +322,7 @@ Ext4ReadInode (
> > @param[out] Buffer Pointer to the buffer.
> > @param[in] Offset Offset of the read.
> > @param[in out] Length Pointer to the length of the buffer, in
> > bytes.
> > - After a succesful read, it's updated to
> > the
> > + After a successful read, it's updated to
> > the
> > number of read bytes.
> >
> > @return Status of the read operation.
> > @@ -355,7 +355,7 @@ cover.
> > @param[out] Extent Pointer to the output buffer, where the
> > extent
> > will be copied to.
> >
> > - @retval EFI_SUCCESS Retrieval was succesful.
> > + @retval EFI_SUCCESS Retrieval was successful.
> > @retval EFI_NO_MAPPING Block has no mapping.
> > **/
> > EFI_STATUS
> > @@ -946,7 +946,7 @@ Ext4StrCmpInsensitive (
> > @param[in] Entry Pointer to a EXT4_DIR_ENTRY.
> > @param[out] Ucs2FileName Pointer to an array of CHAR16's, of
> > size EXT4_NAME_MAX + 1.
> >
> > - @retval EFI_SUCCESS The filename was succesfully retrieved
> > and converted to UCS2.
> > + @retval EFI_SUCCESS The filename was successfully
> > retrieved and converted to UCS2.
> > @retval EFI_INVALID_PARAMETER The filename is not valid UTF-8.
> > @retval !EFI_SUCCESS Failure.
> > **/
> > @@ -1106,7 +1106,7 @@ Ext4CalculateBlockGroupDescChecksum (
> > );
> >
> > /**
> > - Verifies the existance of a particular RO compat feature set.
> > + Verifies the existence of a particular RO compat feature set.
> > @param[in] Partition Pointer to the opened EXT4
> > partition.
> > @param[in] RoCompatFeatureSet Feature set to test.
> >
> > @@ -1116,7 +1116,7 @@ Ext4CalculateBlockGroupDescChecksum (
> > ((Partition->FeaturesRoCompat & RoCompatFeatureSet) ==
> > RoCompatFeatureSet)
> >
> > /**
> > - Verifies the existance of a particular compat feature set.
> > + Verifies the existence of a particular compat feature set.
> > @param[in] Partition Pointer to the opened EXT4
> > partition.
> > @param[in] CompatFeatureSet Feature set to test.
> >
> > @@ -1126,7 +1126,7 @@ Ext4CalculateBlockGroupDescChecksum (
> > ((Partition->FeaturesCompat & CompatFeatureSet) == CompatFeatureSet)
> >
> > /**
> > - Verifies the existance of a particular compat feature set.
> > + Verifies the existence of a particular compat feature set.
> > @param[in] Partition Pointer to the opened EXT4
> > partition.
> > @param[in] IncompatFeatureSet Feature set to test.
> >
> > @@ -1217,7 +1217,7 @@ Ext4GetExtentLength (
> > @param[in] LogicalBlock Block number which the returned extent
> > must cover.
> > @param[out] Extent Pointer to the output buffer, where the
> > extent will be copied to.
> >
> > - @retval EFI_SUCCESS Retrieval was succesful.
> > + @retval EFI_SUCCESS Retrieval was successful.
> > @retval EFI_NO_MAPPING Block has no mapping.
> > **/
> > EFI_STATUS
> > diff --git a/Features/Ext4Pkg/Ext4Dxe/Extents.c
> > b/Features/Ext4Pkg/Ext4Dxe/Extents.c
> > index f1964426d276..e1001d0a4292 100644
> > --- a/Features/Ext4Pkg/Ext4Dxe/Extents.c
> > +++ b/Features/Ext4Pkg/Ext4Dxe/Extents.c
> > @@ -219,7 +219,7 @@ Ext4ExtentIdxLeafBlock (
> > @param[in] LogicalBlock Block number which the returned extent
> > must cover.
> > @param[out] Extent Pointer to the output buffer, where the
> > extent will be copied to.
> >
> > - @retval EFI_SUCCESS Retrieval was succesful.
> > + @retval EFI_SUCCESS Retrieval was successful.
> > @retval EFI_NO_MAPPING Block has no mapping.
> > **/
> > EFI_STATUS
> > @@ -615,7 +615,7 @@ Ext4GetExtentLength (
> > IN CONST EXT4_EXTENT *Extent
> > )
> > {
> > - // If it's an unintialized extent, the true length is ee_len - 2^15
> > + // If it's an uninitialized extent, the true length is ee_len - 2^15
> > if (EXT4_EXTENT_IS_UNINITIALIZED (Extent)) {
> > return Extent->ee_len - EXT4_EXTENT_MAX_INITIALIZED;
> > }
> > diff --git a/Features/Ext4Pkg/Ext4Dxe/File.c
> > b/Features/Ext4Pkg/Ext4Dxe/File.c
> > index 04198a53bfc0..8dfe324255f4 100644
> > --- a/Features/Ext4Pkg/Ext4Dxe/File.c
> > +++ b/Features/Ext4Pkg/Ext4Dxe/File.c
> > @@ -105,7 +105,7 @@ Ext4IsLastPathSegment (
> > @param[in out] File Pointer to the file we're opening.
> > @param[in] OpenMode Mode in which to open the file.
> >
> > - @return True if the open was succesful, false if we don't have
> > + @return True if the open was successful, false if we don't
> > have
> > enough permissions.
> > **/
> > STATIC
> > diff --git a/Features/Ext4Pkg/Ext4Dxe/Inode.c
> > b/Features/Ext4Pkg/Ext4Dxe/Inode.c
> > index 5ccb4d2bfc42..e44b5638599f 100644
> > --- a/Features/Ext4Pkg/Ext4Dxe/Inode.c
> > +++ b/Features/Ext4Pkg/Ext4Dxe/Inode.c
> > @@ -76,7 +76,7 @@ Ext4CalculateInodeChecksum (
> > @param[out] Buffer Pointer to the buffer.
> > @param[in] Offset Offset of the read.
> > @param[in out] Length Pointer to the length of the buffer, in
> > bytes.
> > - After a succesful read, it's updated to
> > the number of read bytes.
> > + After a successful read, it's updated to
> > the number of read bytes.
> >
> > @return Status of the read operation.
> > **/
> > diff --git a/Features/Ext4Pkg/Ext4Dxe/Superblock.c
> > b/Features/Ext4Pkg/Ext4Dxe/Superblock.c
> > index edee051c41e8..5a3c7f478187 100644
> > --- a/Features/Ext4Pkg/Ext4Dxe/Superblock.c
> > +++ b/Features/Ext4Pkg/Ext4Dxe/Superblock.c
> > @@ -151,7 +151,7 @@ Ext4VerifySuperblockChecksum (
> > Opens and parses the superblock.
> >
> > @param[out] Partition Partition structure to fill with filesystem
> > details.
> > - @retval EFI_SUCCESS Parsing was succesful and the partition is a
> > + @retval EFI_SUCCESS Parsing was successful and the partition is a
> > valid ext4 partition.
> > **/
> > EFI_STATUS
> > @@ -203,7 +203,7 @@ Ext4OpenSuperblock (
> >
> > // Now, check for the feature set of the filesystem
> > // It's essential to check for this to avoid filesystem corruption and
> > to avoid
> > - // accidentally opening an ext2/3/4 filesystem we don't understand,
> > which would be disasterous.
> > + // accidentally opening an ext2/3/4 filesystem we don't understand,
> > which would be disastrous.
> >
> > if (Partition->FeaturesIncompat & ~gSupportedIncompatFeat) {
> > DEBUG ((
> > @@ -312,7 +312,7 @@ Ext4OpenSuperblock (
> > return EFI_OUT_OF_RESOURCES;
> > }
> >
> > - // Note that the cast below is completely safe, because EXT4_FILE is a
> > specialisation of EFI_FILE_PROTOCOL
> > + // Note that the cast below is completely safe, because EXT4_FILE is a
> > specialization of EFI_FILE_PROTOCOL
> > Status = Ext4OpenVolume (&Partition->Interface, (EFI_FILE_PROTOCOL
> > **)&Partition->Root);
> >
> > if (EFI_ERROR (Status)) {
> > diff --git a/Features/Ext4Pkg/Ext4Dxe/Symlink.c
> > b/Features/Ext4Pkg/Ext4Dxe/Symlink.c
> > index 0905417ffb88..19b357ac6ba0 100644
> > --- a/Features/Ext4Pkg/Ext4Dxe/Symlink.c
> > +++ b/Features/Ext4Pkg/Ext4Dxe/Symlink.c
> > @@ -201,7 +201,7 @@ Ext4ReadSymlink (
> > CHAR16 *Needle;
> >
> > //
> > - // Assume that we alread read Inode via Ext4ReadInode
> > + // Assume that we already read Inode via Ext4ReadInode
> > // Skip reading, just check encryption flag
> > //
> > if ((File->Inode->i_flags & EXT4_ENCRYPT_FL) != 0) {
> > --
> > 2.39.1
> >
>
> Reviewed-by: Pedro Falcato <pedro.falc...@gmail.com>
>
> --
> Pedro
--
Pedro
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#99090): https://edk2.groups.io/g/devel/message/99090
Mute This Topic: https://groups.io/mt/96548973/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
