Add new Debug library instance to support multiple channel debug message.
Cc: Guo Dong <guo.d...@intel.com>
Cc: Ray Ni <ray...@intel.com>
Cc: Maurice Ma <maurice...@intel.com>
Cc: Benjamin You <benjamin....@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Kavya <k.kavyax.sravan...@intel.com>
---
UefiPayloadPkg/Library/BaseDebugLibHob/BaseDebugLibHob.c | 295
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
UefiPayloadPkg/Library/BaseDebugLibHob/BaseDebugLibHob.inf | 37
+++++++++++++++++++++++++++++++++++++
2 files changed, 332 insertions(+)
diff --git a/UefiPayloadPkg/Library/BaseDebugLibHob/BaseDebugLibHob.c
b/UefiPayloadPkg/Library/BaseDebugLibHob/BaseDebugLibHob.c
new file mode 100644
index 0000000000..0fd9e795a3
--- /dev/null
+++ b/UefiPayloadPkg/Library/BaseDebugLibHob/BaseDebugLibHob.c
@@ -0,0 +1,295 @@
+/** @file
+ Instance of Debug Library based on Serial Port Library.
+
+ Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Base.h>
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/DebugLib.h>
+#include <Library/PrintLib.h>
+#include <Library/PcdLib.h>
+#include <Library/DebugPrintErrorLevelLib.h>
+
+//
+// Define the maximum debug and assert message length that this library
supports
+//
+#define MAX_DEBUG_MESSAGE_LENGTH 0x100
+
+/**
+ Initialize the serial device hardware.
+
+ If no initialization is required, then return RETURN_SUCCESS.
+ If the serial device was successfully initialized, then return
RETURN_SUCCESS.
+ If the serial device could not be initialized, then return
RETURN_DEVICE_ERROR.
+ If gUniversalPayloadSerialPortInfoGuid not found, then return
RETURN_NOT_FOUND.
+
+ @retval RETURN_SUCCESS The serial device was initialized.
+ @retval RETURN_DEVICE_ERROR The serial device could not be initialized.
+ @retval RETURN_NOT_FOUND GuidHob not found.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortInitialize (
+ VOID
+ );
+
+/**
+ Write data from buffer to serial device.
+
+ Writes NumberOfBytes data bytes from Buffer to the serial device.
+ The number of bytes actually written to the serial device is returned.
+ If the return value is less than NumberOfBytes, then the write operation
failed.
+ If Buffer is NULL, then return 0.
+ If NumberOfBytes is zero, then return 0.
+
+ @param Buffer Pointer to the data buffer to be written.
+ @param NumberOfBytes Number of bytes to written to the serial device.
+
+ @retval 0 NumberOfBytes is 0.
+ @retval >0 The number of bytes written to the serial device.
+ If this value is less than NumberOfBytes, then the
write operation failed.
+
+**/
+UINTN
+EFIAPI
+SerialPortWrite (
+ IN UINT8 *Buffer,
+ IN UINTN NumberOfBytes
+ );
+
+/**
+ Prints a debug message to the debug output device if the specified error
level is enabled.
+
+ If any bit in ErrorLevel is also set in DebugPrintErrorLevelLib function
+ GetDebugPrintErrorLevel (), then print the message specified by Format and
the
+ associated variable argument list to the debug output device.
+
+ If Format is NULL, then ASSERT().
+
+ @param ErrorLevel The error level of the debug message.
+ @param Format Format string for the debug message to print.
+ @param ... Variable argument list whose contents are accessed
+ based on the format string specified by Format.
+
+**/
+VOID
+EFIAPI
+DebugPrint (
+ IN UINTN ErrorLevel,
+ IN CONST CHAR8 *Format,
+ ...
+ )
+{
+ CHAR8 Buffer[MAX_DEBUG_MESSAGE_LENGTH];
+ VA_LIST Marker;
+
+ //
+ // If Format is NULL, then ASSERT().
+ //
+ ASSERT (Format != NULL);
+
+ //
+ // Check driver debug mask value and global mask
+ //
+ if ((ErrorLevel & GetDebugPrintErrorLevel ()) == 0) {
+ return;
+ }
+
+ //
+ // Convert the DEBUG() message to an ASCII String
+ //
+ VA_START (Marker, Format);
+ AsciiVSPrint (Buffer, sizeof (Buffer), Format, Marker);
+ VA_END (Marker);
+
+ SerialPortWrite ((UINT8 *)Buffer, AsciiStrLen (Buffer));
+}
+
+/**
+ Prints an assert message containing a filename, line number, and description.
+ This may be followed by a breakpoint or a dead loop.
+
+ Print a message of the form "ASSERT <FileName>(<LineNumber>):
<Description>\n"
+ to the debug output device. If DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED bit
of
+ PcdDebugProperyMask is set then CpuBreakpoint() is called. Otherwise, if
+ DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of PcdDebugProperyMask is set then
+ CpuDeadLoop() is called. If neither of these bits are set, then this
function
+ returns immediately after the message is printed to the debug output device.
+ DebugAssert() must actively prevent recursion. If DebugAssert() is called
while
+ processing another DebugAssert(), then DebugAssert() must return immediately.
+
+ If FileName is NULL, then a <FileName> string of "(NULL) Filename" is
printed.
+ If Description is NULL, then a <Description> string of "(NULL) Description"
is printed.
+
+ @param FileName The pointer to the name of the source file that
generated the assert condition.
+ @param LineNumber The line number in the source file that generated the
assert condition
+ @param Description The pointer to the description of the assert condition.
+
+**/
+VOID
+EFIAPI
+DebugAssert (
+ IN CONST CHAR8 *FileName,
+ IN UINTN LineNumber,
+ IN CONST CHAR8 *Description
+ )
+{
+ CHAR8 Buffer[MAX_DEBUG_MESSAGE_LENGTH];
+
+ //
+ // Generate the ASSERT() message in Ascii format
+ //
+ AsciiSPrint (Buffer, sizeof (Buffer), "ASSERT [%a] %a(%d): %a\n",
gEfiCallerBaseName, FileName, LineNumber, Description);
+
+ SerialPortWrite ((UINT8 *)Buffer, AsciiStrLen (Buffer));
+
+ //
+ // Generate a Breakpoint, DeadLoop, or NOP based on PCD settings
+ //
+ if ((PcdGet8(PcdDebugPropertyMask) &
DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED) != 0) {
+ CpuBreakpoint ();
+ } else if ((PcdGet8(PcdDebugPropertyMask) &
DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED) != 0) {
+ CpuDeadLoop ();
+ }
+}
+
+/**
+ Fills a target buffer with PcdDebugClearMemoryValue, and returns the target
buffer.
+
+ This function fills Length bytes of Buffer with the value specified by
+ PcdDebugClearMemoryValue, and returns Buffer.
+
+ If Buffer is NULL, then ASSERT().
+ If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT().
+
+ @param Buffer Pointer to the target buffer to be filled with
PcdDebugClearMemoryValue.
+ @param Length Number of bytes in Buffer to fill with zeros
PcdDebugClearMemoryValue.
+
+ @return Buffer Pointer to the target buffer filled with
PcdDebugClearMemoryValue.
+
+**/
+VOID *
+EFIAPI
+DebugClearMemory (
+ OUT VOID *Buffer,
+ IN UINTN Length
+ )
+{
+ ASSERT (Buffer != NULL);
+
+ return SetMem (Buffer, Length, PcdGet8 (PcdDebugClearMemoryValue));
+}
+
+/**
+ Returns TRUE if ASSERT() macros are enabled.
+
+ This function returns TRUE if the DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of
+ PcdDebugProperyMask is set. Otherwise FALSE is returned.
+
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of
PcdDebugProperyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of
PcdDebugProperyMask is clear.
+
+**/
+BOOLEAN
+EFIAPI
+DebugAssertEnabled (
+ VOID
+ )
+{
+ return (BOOLEAN)((PcdGet8 (PcdDebugPropertyMask) &
DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED) != 0);
+}
+
+/**
+ Returns TRUE if DEBUG() macros are enabled.
+
+ This function returns TRUE if the DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of
+ PcdDebugProperyMask is set. Otherwise FALSE is returned.
+
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of
PcdDebugProperyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of
PcdDebugProperyMask is clear.
+
+**/
+BOOLEAN
+EFIAPI
+DebugPrintEnabled (
+ VOID
+ )
+{
+ return (BOOLEAN)((PcdGet8 (PcdDebugPropertyMask) &
DEBUG_PROPERTY_DEBUG_PRINT_ENABLED) != 0);
+}
+
+/**
+ Returns TRUE if DEBUG_CODE() macros are enabled.
+
+ This function returns TRUE if the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
+ PcdDebugProperyMask is set. Otherwise FALSE is returned.
+
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
PcdDebugProperyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
PcdDebugProperyMask is clear.
+
+**/
+BOOLEAN
+EFIAPI
+DebugCodeEnabled (
+ VOID
+ )
+{
+ return (BOOLEAN)((PcdGet8 (PcdDebugPropertyMask) &
DEBUG_PROPERTY_DEBUG_CODE_ENABLED) != 0);
+}
+
+/**
+ Returns TRUE if DEBUG_CLEAR_MEMORY() macro is enabled.
+
+ This function returns TRUE if the DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of
+ PcdDebugProperyMask is set. Otherwise FALSE is returned.
+
+ @retval TRUE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of
PcdDebugProperyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of
PcdDebugProperyMask is clear.
+
+**/
+BOOLEAN
+EFIAPI
+DebugClearMemoryEnabled (
+ VOID
+ )
+{
+ return (BOOLEAN)((PcdGet8 (PcdDebugPropertyMask) &
DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED) != 0);
+}
+
+/**
+ Returns TRUE if any one of the bit is set both in ErrorLevel and
PcdFixedDebugPrintErrorLevel.
+
+ This function compares the bit mask of ErrorLevel and
PcdFixedDebugPrintErrorLevel.
+
+ @retval TRUE Current ErrorLevel is supported.
+ @retval FALSE Current ErrorLevel is not supported.
+
+**/
+BOOLEAN
+EFIAPI
+DebugPrintLevelEnabled (
+ IN CONST UINTN ErrorLevel
+ )
+{
+ return (BOOLEAN)((ErrorLevel & PcdGet32 (PcdFixedDebugPrintErrorLevel)) !=
0);
+}
+
+/**
+ The constructor function to initialize Debug port Library
+
+ @retval EFI_SUCCESS The constructor always returns RETURN_SUCCESS.
+
+**/
+RETURN_STATUS
+EFIAPI
+BaseDebugLibHobConstructor (
+ VOID
+ )
+{
+ return SerialPortInitialize ();
+}
diff --git a/UefiPayloadPkg/Library/BaseDebugLibHob/BaseDebugLibHob.inf
b/UefiPayloadPkg/Library/BaseDebugLibHob/BaseDebugLibHob.inf
new file mode 100644
index 0000000000..11ed8de08b
--- /dev/null
+++ b/UefiPayloadPkg/Library/BaseDebugLibHob/BaseDebugLibHob.inf
@@ -0,0 +1,37 @@
+## @file
+# Instance of Debug Library based on Serial Port Library.
+#
+# Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = BaseDebugLibHob
+ FILE_GUID = ae4cc887-ea47-4d5c-a8f9-1d08405b5f8b
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = DebugLib
+ CONSTRUCTOR = BaseDebugLibHobConstructor
+
+[Sources]
+ BaseDebugLibHob.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+
+[LibraryClasses]
+ BaseLib
+ PcdLib
+ DebugPrintErrorLevelLib
+ BaseMemoryLib
+ PrintLib
+ SerialPortLib
+
+[Pcd]
+ gEfiMdePkgTokenSpaceGuid.PcdDebugClearMemoryValue
+ gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask
+ gEfiMdePkgTokenSpaceGuid.PcdFixedDebugPrintErrorLevel
--
2.30.2.windows.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#91337): https://edk2.groups.io/g/devel/message/91337
Mute This Topic: https://groups.io/mt/92373389/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
