Folks,
I am trying to enable vTPM support in Windows Guest while using
cloud-hypervisor as the VMM and OVMF firmware from edk2 repo.
The Firmware is built with the following command:
build -a AARCH64 -t GCC5 -p ArmVirtPkg/ArmVirtCloudHv.dsc -b DEBUG \
-D TPM2_ENABLE=TRUE -D TPM2_CONFIG_ENABLE=TRUE \
-D SOURCE_DEBUG_ENABLE
Below is the FDT, I am passing to the guest/firmware from
cloud-hypervisor:
Printing the FDT:
/
compatible : "linux,dummy-virt "
#address-cells : [2]
#size-cells : [2]
interrupt-parent : [1]
cpus/
#address-cells : [1]
#size-cells : [0]
cpu@0/
device_type : "cpu"
compatible : "arm,arm-v8 "
reg : [0]
phandle : [6]
cpu-map/
cluster0/
core0/
thread0/
cpu : [6]
memory/
device_type : "memory"
reg : [0, 40000000, 0, 80000000]
chosen/
bootargs : "earlycon=pl011,mmio,0x09000000"
intc/
compatible : "arm,gic-v3 "
interrupt-controller : []
#interrupt-cells : [3]
reg : [0, 8FF0000, 0, 10000, 0, 8FD0000, 0, 20000]
phandle : [1]
#address-cells : [2]
#size-cells : [2]
ranges : []
interrupts : [1, 9, 4]
msic/
compatible : "arm,gic-v3-its "
msi-controller : []
phandle : [2]
reg : [0, 8FB0000, 0, 20000]
timer/
compatible : "arm,armv8-timer "
always-on : []
interrupts : [1, D, 4, 1, E, 4, 1, B, 4, 1, A, 4]
pmu/
compatible : "arm,armv8-pmuv3 "
interrupts : [1, 7, 104]
apb-pclk/
compatible : "fixed-clock "
#clock-cells : [0]
clock-frequency : "\u{1}n6"
clock-output-names : "clk24mhz"
phandle : [3]
psci/
compatible : "arm,psci-0.2 "
method : "hvc"
tpm@FED40000/
compatible : "tcg,tpm-tis-mmio "
interrupts : [0, 2C, 1]
reg : [0, FED40000, 0, 5000]
pl011@9000000/
compatible : "arm,pl011 arm,primecell "
reg : [0, 9000000, 0, 1000]
clocks : [3]
clock-names : "apb_pclk"
interrupts : [0, B, 1]
rtc@9010000/
compatible : "arm,pl031 arm,primecell "
reg : [0, 9010000, 0, 1000]
interrupts : [0, 8, 4]
clocks : [3]
clock-names : "apb_pclk"
pl061@9020000/
compatible : "arm,pl061 arm,primecell "
reg : [0, 9020000, 0, 1000]
interrupts : [0, 9, 1]
gpio-controller : []
#gpio-cells : [2]
clocks : [3]
clock-names : "apb_pclk"
phandle : [4]
gpio-keys/
compatible : "gpio-keys "
#size-cells : [0]
#address-cells : [1]
button@1/
label : "GPIO Key Poweroff"
linux,code : [74]
gpios : [4, 3, 0]
pci@30000000/
compatible : "pci-host-ecam-generic "
device_type : "pci"
ranges : [1000000, 0, 0, 0, 9050000, 0, 10000, 2000000, 0,
10000000, 0, 10000000, 0, 20000000, 3000000, 2, 0, 2, 0, FD, 0]
bus-range : [0, 0]
linux,pci-domain : [0]
#address-cells : [3]
#size-cells : [2]
reg : [0, 30000000, 0, 100000]
#interrupt-cells : [1]
interrupt-map : []
interrupt-map-mask : []
dma-coherent : []
msi-map : [0, 2, 0, 100]
msi-parent : [2]
https://github.com/praveen-pk/edk2/commit/59cf5ce41ff6ad2f81273bbd55160747637c3cc2
and
https://github.com/praveen-pk/edk2/commit/55e7fcc21b7aeaaae457f60f8427aaf1e2ff432c
are the changes made to enable TPM support in cloud-hypervisor's recipe.
With the above setup I am running into the following failure:
"""""
Install PPI: 6CC45765-CCE4-42FD-BC56-011AAAC6C9A8
Install PPI: 8C9F4DE3-7B90-47EF-9308-287CECD66DE8
Install PPI: E09F355D-DAE8-4910-B14A-92780FDCF7CB
Install PPI: 75CF14AE-3441-49DC-AA10-BB35A7BA8BAB
Loading PEIM BF7F2B0C-9F2F-4889-AB5C-12460022BE87
add-symbol-file
/root/winiot/edk2/Build/ArmVirtCloudHv-AARCH64/DEBUG_GCC5/AARCH64/OvmfPkg/Tcg/Tcg2Config/Tcg2ConfigPei/DEBUG/Tcg2ConfigPei.dll
0xBFAC1240
Loading PEIM at 0x000BFAC1160 EntryPoint=0x000BFAC2C2C Tcg2ConfigPei.efi
Synchronous Exception at 0xBFAC312
""""
Further debugging I noticed the Exception happens during an MmioRead.
Below is the related trace:
""""
add-symbol-file
/root/winiot/edk2/Build/ArmVirtCloudHv-AARCH6/DEBUG_GCC5/AARCH64/OvmfPkg/Tcg/Tcg2Config/Tcg2ConfigPei/DEBUG/Tcg2ConfigPei.dll
0xBFAC1240
Loading PEIM at 0x000BFAC1160 EntryPoint=0x000BFAC2C2C Tcg2ConfigPei.efi
_ModuleEntryPoint
ProcessLibraryConstructorList start _ModuleEntryPoint
BaseDebugLibSerialPortConstructor
TimerConstructor
Tpm2DeviceLibConstructor
Tpm2GetPtpInterface Register = FED40000
Tpm2IsPtpPresence Start, Reg = FED40000
ioLibArmVirt.c MmioRead8
ioLibArmVirt.c MmioRead8
Synchronous Exception at 0xBFAC312
""""
Any thoughts on what could be going wrong with TPM device configuration
in the firmware? I'd appreciate any inputs on this issue.
--
Regards,
Praveen K Paladugu
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#89355): https://edk2.groups.io/g/devel/message/89355
Mute This Topic: https://groups.io/mt/90740087/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
