This library provides a delay interface and a timing interface.
Signed-off-by: xianglai li <lixiang...@loongson.cn>
---
.../Include/Library/StableTimer.h | 42 +++
.../Library/StableTimerLib/Count.S | 26 ++
.../Library/StableTimerLib/TimerLib.c | 262 ++++++++++++++++++
.../Library/StableTimerLib/TimerLib.inf | 28 ++
4 files changed, 358 insertions(+)
create mode 100644
Platform/Loongson/LoongArchQemuPkg/Include/Library/StableTimer.h
create mode 100644
Platform/Loongson/LoongArchQemuPkg/Library/StableTimerLib/Count.S
create mode 100644
Platform/Loongson/LoongArchQemuPkg/Library/StableTimerLib/TimerLib.c
create mode 100644
Platform/Loongson/LoongArchQemuPkg/Library/StableTimerLib/TimerLib.inf
diff --git a/Platform/Loongson/LoongArchQemuPkg/Include/Library/StableTimer.h
b/Platform/Loongson/LoongArchQemuPkg/Include/Library/StableTimer.h
new file mode 100644
index 0000000000..bd6a1eb90f
--- /dev/null
+++ b/Platform/Loongson/LoongArchQemuPkg/Include/Library/StableTimer.h
@@ -0,0 +1,42 @@
+/** @file
+
+ Copyright (c) 2021 Loongson Technology Corporation Limited. All rights
reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+ @par Glossary:
+ - Csr - Cpu Status Register
+ - Calc - Calculation
+ - Freq - frequency
+**/
+
+#ifndef STABLE_TIMER_H_
+#define STABLE_TIMER_H_
+#include "Library/Cpu.h"
+
+/**
+ Gets the timer count value.
+
+ @param[] VOID
+
+ @retval timer count value.
+**/
+UINTN
+EFIAPI
+CsrReadTime (
+ VOID
+ );
+
+/**
+ Calculate the timer frequency.
+
+ @param[] VOID
+
+ @retval Timer frequency.
+**/
+UINT32
+EFIAPI
+CalcConstFreq (
+ VOID
+ );
+#endif
diff --git a/Platform/Loongson/LoongArchQemuPkg/Library/StableTimerLib/Count.S
b/Platform/Loongson/LoongArchQemuPkg/Library/StableTimerLib/Count.S
new file mode 100644
index 0000000000..42f878caf8
--- /dev/null
+++ b/Platform/Loongson/LoongArchQemuPkg/Library/StableTimerLib/Count.S
@@ -0,0 +1,26 @@
+#------------------------------------------------------------------------------
+#
+# Count for LoongArch
+#
+# Copyright (c) 2021 Loongson Technology Corporation Limited. All rights
reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#------------------------------------------------------------------------------
+
+#ifndef __ASSEMBLY__
+#define __ASSEMBLY__
+#endif
+
+#include "Library/Cpu.h"
+#include "LoongArchAsmMacro.h"
+#
+# Set cpu interrupts
+# @param A0 The interrupt number
+#
+ASM_FUNC(CpuSetIP)
+ csrrd T0, LOONGARCH_CSR_ECFG
+ or T0, T0, A0
+ csrwr T0, LOONGARCH_CSR_ECFG
+ jirl ZERO, RA,0
+
diff --git
a/Platform/Loongson/LoongArchQemuPkg/Library/StableTimerLib/TimerLib.c
b/Platform/Loongson/LoongArchQemuPkg/Library/StableTimerLib/TimerLib.c
new file mode 100644
index 0000000000..21e3749ee6
--- /dev/null
+++ b/Platform/Loongson/LoongArchQemuPkg/Library/StableTimerLib/TimerLib.c
@@ -0,0 +1,262 @@
+/** @file
+ Generic LoongArch implementation of TimerLib.h
+
+ Copyright (c) 2021 Loongson Technology Corporation Limited. All rights
reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+ @par Glossary:
+ - Freq - Frequency
+ - Csr - Cpu Status Register
+ - calc - calculate
+**/
+
+#include <Base.h>
+#include <Library/TimerLib.h>
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include "Library/StableTimer.h"
+#include "Library/Cpu.h"
+
+UINT32 StableTimerFreq = 0;
+
+/**
+ Gets the timer count value.
+
+ @param[] VOID
+
+ @retval timer count value.
+**/
+UINTN
+EFIAPI
+CsrReadTime (
+ VOID
+ )
+{
+ UINTN Value = 0;
+ __asm__ __volatile__(
+ " rdtime.d %0, $r0\n"
+ : "=r" (Value));
+ return Value;
+}
+
+/**
+ Calculate the timer frequency.
+
+ @param[] VOID
+
+ @retval Timer frequency.
+**/
+UINT32
+EFIAPI
+CalcConstFreq (
+ VOID
+ )
+{
+ UINT32 Result;
+ UINT32 BaseFreq;
+ UINT32 ClockMultiplier;
+ UINT32 ClockDivide;
+
+ LOONGARCH_GET_CPUCFG (BaseFreq, LOONGARCH_CPUCFG4);
+ LOONGARCH_GET_CPUCFG (Result, LOONGARCH_CPUCFG5);
+ ClockMultiplier = Result & 0xffff;
+ ClockDivide = (Result >> 16) & 0xffff;
+
+ if ((!BaseFreq)
+ || (!ClockMultiplier)
+ || (!ClockDivide))
+ {
+ return 0;
+ }
+ else {
+ return (BaseFreq * ClockMultiplier / ClockDivide);
+ }
+}
+/**
+ Get the timer frequency.
+
+ @param[] VOID
+
+ @retval Timer frequency.
+**/
+UINT32
+EFIAPI
+GetFreq (
+ VOID
+ )
+{
+ if (StableTimerFreq) {
+ } else {
+ StableTimerFreq = CalcConstFreq ();
+ }
+
+ return StableTimerFreq;
+}
+
+/**
+ Stalls the CPU for at least the given number of microseconds.
+
+ Stalls the CPU for the number of microseconds specified by MicroSeconds.
+
+ @param MicroSeconds The minimum number of microseconds to delay.
+
+ @return MicroSeconds
+
+**/
+UINTN
+EFIAPI
+MicroSecondDelay (
+ IN UINTN MicroSeconds
+ )
+{
+
+ UINTN Count;
+ UINTN Ticks;
+ UINTN Start;
+ UINTN End;
+
+ Count = GetFreq ();
+ Count = (Count * MicroSeconds) / 1000000;
+ Start = CsrReadTime ();
+ End = Start + Count;
+
+ do {
+ Ticks = CsrReadTime ();
+ } while (Ticks < End);
+
+ return MicroSeconds;
+}
+
+/**
+ Stalls the CPU for at least the given number of nanoseconds.
+
+ Stalls the CPU for the number of nanoseconds specified by NanoSeconds.
+
+ @param NanoSeconds The minimum number of nanoseconds to delay.
+
+ @return NanoSeconds
+
+**/
+UINTN
+EFIAPI
+NanoSecondDelay (
+ IN UINTN NanoSeconds
+ )
+{
+ UINT32 MicroSeconds;
+
+ if (NanoSeconds % 1000 == 0) {
+ MicroSeconds = NanoSeconds/1000;
+ }else {
+ MicroSeconds = NanoSeconds/1000 + 1;
+ }
+ MicroSecondDelay (MicroSeconds);
+
+ return NanoSeconds;
+}
+
+/**
+ Retrieves the current value of a 64-bit free running performance counter.
+
+ Retrieves the current value of a 64-bit free running performance counter. The
+ counter can either count up by 1 or count down by 1. If the physical
+ performance counter counts by a larger increment, then the counter values
+ must be translated. The properties of the counter can be retrieved from
+ GetPerformanceCounterProperties ().
+
+ @return The current value of the free running performance counter.
+
+**/
+UINT64
+EFIAPI
+GetPerformanceCounter (
+ VOID
+ )
+{
+ return CsrReadTime ();
+}
+/**
+ Retrieves the 64-bit frequency in Hz and the range of performance counter
+ values.
+
+ If StartValue is not NULL, then the value that the performance counter starts
+ with immediately after is it rolls over is returned in StartValue. If
+ EndValue is not NULL, then the value that the performance counter end with
+ immediately before it rolls over is returned in EndValue. The 64-bit
+ frequency of the performance counter in Hz is always returned. If StartValue
+ is less than EndValue, then the performance counter counts up. If StartValue
+ is greater than EndValue, then the performance counter counts down. For
+ example, a 64-bit free running counter that counts up would have a StartValue
+ of 0 and an EndValue of 0xFFFFFFFFFFFFFFFF. A 24-bit free running counter
+ that counts down would have a StartValue of 0xFFFFFF and an EndValue of 0.
+
+ @param StartValue The value the performance counter starts with when it
+ rolls over.
+ @param EndValue The value that the performance counter ends with before
+ it rolls over.
+
+ @return The frequency in Hz.
+
+**/
+UINT64
+EFIAPI
+GetPerformanceCounterProperties (
+ OUT UINT64 *StartValue, OPTIONAL
+ OUT UINT64 *EndValue OPTIONAL
+ )
+{
+ if (StartValue != NULL) {
+ *StartValue = BIT2;
+ }
+
+ if (EndValue != NULL) {
+ *EndValue = BIT48 - 1;
+ }
+
+ return GetFreq ();
+}
+
+/**
+ Converts elapsed ticks of performance counter to time in nanoseconds.
+
+ This function converts the elapsed ticks of running performance counter to
+ time value in unit of nanoseconds.
+
+ @param Ticks The number of elapsed ticks of running performance counter.
+
+ @return The elapsed time in nanoseconds.
+
+**/
+UINT64
+EFIAPI
+GetTimeInNanoSecond (
+ IN UINT64 Ticks
+ )
+{
+ UINT64 Frequency;
+ UINT64 NanoSeconds;
+ UINT64 Remainder;
+ INTN Shift;
+
+ Frequency = GetPerformanceCounterProperties (NULL, NULL);
+
+ //
+ // Ticks
+ // Time = --------- x 1,000,000,000
+ // Frequency
+ //
+ NanoSeconds = MultU64x32 (DivU64x64Remainder (Ticks, Frequency, &Remainder),
1000000000u);
+
+ //
+ // Ensure (Remainder * 1,000,000,000) will not overflow 64-bit.
+ // Since 2^29 < 1,000,000,000 = 0x3B9ACA00 < 2^30, Remainder should <
2^(64-30) = 2^34,
+ // i.e. highest bit set in Remainder should <= 33.
+ //
+ Shift = MAX (0, HighBitSet64 (Remainder) - 33);
+ Remainder = RShiftU64 (Remainder, (UINTN) Shift);
+ Frequency = RShiftU64 (Frequency, (UINTN) Shift);
+ NanoSeconds += DivU64x64Remainder (MultU64x32 (Remainder, 1000000000u),
Frequency, NULL);
+
+ return NanoSeconds;
+}
diff --git
a/Platform/Loongson/LoongArchQemuPkg/Library/StableTimerLib/TimerLib.inf
b/Platform/Loongson/LoongArchQemuPkg/Library/StableTimerLib/TimerLib.inf
new file mode 100644
index 0000000000..fef0fac08c
--- /dev/null
+++ b/Platform/Loongson/LoongArchQemuPkg/Library/StableTimerLib/TimerLib.inf
@@ -0,0 +1,28 @@
+## @file
+# Generic LoongArch implementation of TimerLib.h
+#
+# Copyright (c) 2021 Loongson Technology Corporation Limited. All rights
reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = TimerLib
+ FILE_GUID = 740389C7-CC44-4A2F-88DC-89D97D312E7C
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = TimerLib
+
+[Sources.common]
+ TimerLib.c
+ Count.S
+
+[Packages]
+ Platform/Loongson/LoongArchQemuPkg/Loongson.dec
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ DebugLib
+ IoLib
--
2.31.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#87999): https://edk2.groups.io/g/devel/message/87999
Mute This Topic: https://groups.io/mt/90014668/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
